Technical information

Installing the Mwave Support Software
Note:
To shut down OS/2:
1. Move the mouse pointer to a
blank part of your OS/2
Desktop.
2. Press the right button of your
TrackPoint III or mouse.
3. Select Shut down.
6 Restart OS/2 to make the Mwave features effective.
7 Install Mwave MMPM audio support software as follows:
a) Insert the Mwave DSP Features Diskette for OS/2 Audio
into the diskette drive.
b) Type A:SETUP at the command prompt; then press
Enter.
c) Follow the instructions on the screen.
8 After the installation is complete, remove any diskette
from the diskette drive; then restart OS/2 to activate the
Mwave support software.
You have completed the installation of the Mwave support software
for OS/2.
When You Use the WIN-OS/2 Environment
If you use the Mwave functions in the WIN-OS/2 environment, do
the following:
1 Install the Mwave support software for Windows in a
full-screen WIN-OS/2 environment with the procedure on
page 195.
2 Check your WIN-OS/2 Settings and modify them as
follows, referring to your OS/2 manuals:
WIN_RUN_MODE: 3.1 Enhanced Compatibility
HW_TIMER:ON
INT_DURING_IO:ON
DOS_BACKGROUND_EXECUTION:ON
Chapter 7. Installing Software 193