Technical information

Installing the Mwave Support Software
WIN
Installing for Windows
Warning:
Before you install the Mwave
support software, close all open
applications.
To install the Mwave support software for Windows, do the
following:
1 Turn on the computer; then start Windows.
2 Select File from the Program Manager window; then
select Run... from the pull-down menu.
3 Insert the Mwave DSP Features Diskette 1 for Windows
into the diskette drive.
4 Type A:SETUP; then press Enter.
The following screen, which enables you to specify the
directory location of Mwave support software, appears:
Mwave Installation
Please enter the desired location for the Mwave files.
OK
Cancel
c:\MWW
5 If this directory is acceptable, press Enter. Otherwise,
type the directory name; then press Enter.
6 Follow the instructions on the screen.
7 After the installation is complete, remove any diskette
from the diskette drive; then restart Windows to activate
the Mwave support software.
You have completed the installation of the Mwave Windows support
software.
Chapter 7. Installing Software 195