Technical information

Getting Started
Setting Up Your Computer
You are now ready to assemble and start your computer. The
following steps will guide you through the process.
The following conventions are used in the illustrations appearing in
this chapter:
1 Indicates a main sequence of actions.
Indicates a subsequence of actions in a main action. An arrow
accompanying the number shows the direction of movement.
1 Slide the latches on the sides of the computer
halfway toward the front; then open the liquid crystal
display (LCD).
2 Slide the same two latches forward again all the way
toward the front; then raise the keyboard.
Some pressure might be needed to slide these latches if they
are tight.
3 Install the battery pack into the middle compartment
and firmly press it in to make sure of the electrical
connection; then close the keyboard.
Sliding the latches forward while closing the keyboard makes it
easier to close the keyboard.
CAUTION:
The battery pack provided with your computer contains a
small amount of harmful substances. To avoid possible
injury:
Do not touch the battery terminals to any metal
objects.
Keep the battery pack away from fire.
Do not soak the battery pack in water or expose it to
rain.
Do not attempt to disassemble the battery pack.
Avoid mechanical shocks to the battery.
Always use battery packs recommended by IBM.
Keep the battery pack away from children.
6 IBM ThinkPad 755CX User's Guide