Technical information

Advanced Information for PC Cards
Note:
For more information, see Chapter 5
of the Dock I User's Guide .
This maximizes the memory address range that is allocated for the
PC Cards and SCSI adapter in the Dock I. This assumes the Dock
I SCSI adapter is at the default allocation (X'CA000'—X'CBFFF').
Using several PC Cards
– Modify the configuration file as in the following example
(IBM token ring card + IBM Ethernet card + IBM 3270 card
+ modem + EMM386):
< CONFIG.SYS >
DEVICE=C:\DOS\EMM386.EXE NOEMS X=C3 -CFFF ← modified
:
DEVICE=C:\THINKPAD\IBMDSS 1.SYS
DEVICE=C:\THINKPAD\IBMDOSCS.SYS
DEVICE=C:\THINKPAD\DICRMU 1.SYS /MA=C3 -CFFF ← modified
DEVICE=C:\THINKPAD\$ICPMDOS.SYS
DEVICE=C:\DOS\POWER.EXE
DEVICE=C:\THINKPAD\AUTODRV.SYS C:\THINKPAD\AUTODRV.INI
DEVICE=C:\THINKPAD\DISKDRV.SYS
:
:
DEVICE=C:\LSP\PROTMAN.DOC /I:C:\LSP ← LSP adds this line
DEVICE=C:\LSP\PCMNICCS.DOC ← LSP adds this line
DEVICE=C:\LSP\IBMTOKCS.DOC ← LSP adds this line
DEVICE=C:\LSP\DXMA MOD.SYS 1 ← LSP adds this line
DEVICE=C:\LSP\DXME MOD.SYS ← LSP adds this line
DEVICE=C:\LSP\DXMT MOD.SYS O=N ← LSP adds this line
: (LSP: LAN Support Program)
< PROTOCOL.INI (C:\LSP\PROTOCOL.INI) >
[IBMTOKCS_NIF]
:
RAM = Xc4 ← modified
RAMSIZE = 16
:
MMIO = Xcc ← modified
[PCMNICCS_NIF]
:
RAM = Xc8 ← modified
:
Appendix B. Advanced Information for PC Cards 237