Technical information

Using the Mwave DSP Audio Features
Audio Control
Audio Control
When you double-click on the Audio Control icon, the following
window appears:
MwaveAudioControl
RecordControl OutputControl
Source
CD+Line
Audio
Options..
Level Aux
MIDISynth
Wave Audio Master
Mute Mute
Mute
Mute
Mute
LR
LR
LR
LR
LR
Line
Mic
This window allows you to control the audio volume as follows:
Record control
This section enables you to select which source you want to
use, adjust the record level, monitor the input signal, and select
an options menu for additional control.
Output control
This section allows you to adjust the balance and sound levels,
and control the mute. And, it can be considered a stereo
amplifier with three input signals, controls to mix the input
signals, and a volume control for the output.
Audio button
This is used to enable the following audio features:
– Audio/Image Synch in the Options menu
– Aux Source
Important
Disable the Audio button before you use a speaker phone
application.
If the Audio button is enabled, the speaker phone
application does not operate correctly and displays an error
message on the screen.
Chapter 3. Operating Your Computer 81