Specifications

WARNING
TO PREVENT SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This equipment should be used with DC 3.6 V =
only or recommended AC adaptor.
CAUTION
To prevent electric shocks and fire hazards,
do NOT use any other power source.
Important:
Audio-visual material may consist of
copyrighted works which must not be
recorded without the authority of the owner
of the copyright. Please refer to relevant
laws in your country.
CAUTION
To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing
to qualified dealer or service centre.
Power supply:
This unit can be operated by connecting it to
either the AC adaptor, battery pack, or
optional car battery adaptor/battery charger.
The AC adaptor incorporates the AUTO
VOLTAGE (AC 110-240 V, 50/60 Hz) function.
This VIEWCAM does not have a PCM recording or playback function. PCM recordings made using
other VCRs or audio dubbing cannot be played back on this unit.
Your VIEWCAM is designed to record in SP mode only. It will not perform normal playback for
programmes prerecorded in LP mode.
If you record on a tape on which PCM sound has already been recorded, the audio track of the new
VIEWCAM recording may not come out when the tape is played back on a PCM-capable VCR. If this
occurs, set the VCR’s audio monitor select switch to the “Standard” position.
NOTE
The VIEWCAM’s LCD panel is a very high technology product with close to 90,000 thin-film transis-
tors*, giving you fine picture detail. Occasionally, a pixel may appear on the screen as a fixed point of
blue, green, red, or black. Please note that this does not affect your VIEWCAM’s performance.
*Specifications are subject to change without notice.