Specifications

Basic Operations
Camera Recording
Recording the Date and Time
Follow the procedure shown below to record
the date and time, or the date only, along with
the subject.
REC START/STOP button
Power switch
1
I
MODE DISPLAY button
SET button
1
2
3
4
v button
Press the MENU button until m
* button
Hold down the Lock button
Lock button
and slide the Power switch
to CAMERA. The
VIEWCAM enters
Recording Standby mode.
appears.
I
bDATE/TIME
MENU
*DISPLAY
OFF
*SELECT
DATE+T IME
bSETTING 2. 6. 1998
10:30
l 12H124H 24H
l 16:9
OFF
aZOOM SPEED STANDARD
aW
v t A 1 SET t!ki
Press the v or A button to move the b
pointers to “DATUTIME” and “DISPLAY”.
bDATE/TIME
bDISPLAY
OFF
.SELECT
DATE+T I ME
*SETTING
2. 6. 1998
10:30
l 12Hl24H
24H
l 16:9
OFF
*ZOOM SPEED STANDARD
Press the SET button (w) to select
“AUTO”, “ON”, or “OFF”.
When “AUTO” is selected, the date/time
is displayed and recorded for IO
seconds at the beginning of the first
recording of each day.
When “ON” is selected, the date/time is
continuously displayed and recorded
along with the subject.
When “OFF” is selected, the date/time is
neither displayed nor recorded.
Notes:
l Select “AUTO” if continuous date/time
display annoys you during recording or
playback.
l In “AUTO”, if you wish to record the date/
time a second time that day, repeat the
procedure described above and re-select
“AUTO”.
5 Press the - button to move the b
pointer to “SELECT”.
.ZOOM SPEED STANDARD
6 Press the SET button (m) to select
“DATE + TIME” or “DATE”.
I
I
I
- bDATE/T IME
OO@
.D ISPLAY
bSELECT
4
I z
~DATE+T lME +DATE--I
When “DATE + TIME” is selected, both
the date and the time are displayed and
recorded.
When “DATE” is selected, only the date
is displayed and recorded.
7 Press the MODE DISPLAY button to
turn off the menu display, and then press
the REC START/STOP button to start
recording.
MODE DISPLAY
2. 6.1998