Manual

19
This camcorder includes functions for use as both a video
camera for recording and playing back images on tapes and as
a digkal still camera for recording and playing back still images
on cards. One of the following camcorder modes needs to be
set before starting any operation.
Power switch
Camcorder modes
TAPE-CAMERA mode
For recording motion and still images on a
tape.
"1 Set the Media Selection
switch to TAPE.
Hold down the Lock button
and set the Power switch
to CAMERA.
CARD-CAMERA mode
For recording still images on a
card.
Lock button
Media Selection switch
TAPE-VCR mode
For playing back or editing motion and still
images recorded on a tape.
"1 Set the Media Selection
switch to TAPE.
Set the Media Selection
switch to CARD.
Hold down the Lock button
and set the Power switch
to CAMERA.
Lock button
2 Hold down the Lock
button and set the Power
switch to VCR.
Lock button
CARD=VCR mode
For playing back still images recorded on a
card.
Set the Media Selection
switch to CARD.
2 Hold down the Lock
button and set the Power
switch to VCR.
Lock buEon
Note:
o To turn the power off, set the Power switch to OFF without pressing the Lock button.
Caution:
" Do not change the carncorder mode by operating the Media Selection switch during recording or
playback, as this may cause damage to the tape or card.