Manual

Useful Features
Camera Recording
Available mode:
TAPE-CAMERA
You can record continuous still imagesof
subjects.
1 Set the camcorder to TAPE-CAMERA
mode.
In Recording Standby mode, sT_
press the STILL button fully.
17
- A still image of the subject is
displayed.
Press the REC START/
STOP button.
- The still image of the
subject will be recorded.
Press the REC START/STOP button.
To cancel the still image
Press tile STILL button fully.
Notes:
oStill Recording can also be used during
recording by pressing the STILL button fully.
oThe picture quality in Still Recording function will
be slightly lower than normal pictures.
Attach the supplied tripod adapter when using
a tripod with the camcorder.
Align the tripod adapter with the tripod
adapter socket on the bottom of the
camcorder, then rotate as shown below.
Tripod adapter socket
Tn od socket t_,,-_ I
2 Attach tripod to tripod socket.
Note:
o You cannot use the supplied tripod adapter, if
the alignment pin is not retractable.
33