Lees alvorens de VIEWCAM in gebruik te nemen deze gebruiksaanwijzing goed door, vooral bladzijde WAARSCHUWING : LET OP VOORKOM ELEKTRISCHE | Joorkor een elektrische SCHOKKEN EN STEL DUITTOESTEL behuizing riet. Er bevinden ESEHA”fgngAANREGENOF repareren ! toestel. Laat reparaties ver Dit toestel mag uitsluitend met 7,4 V = gelijkstroom aan een erkend handelaar of of de gespecificeerde lichtnetadapter worden | onderhoudspersoneel gebruik.
Voorzorgen * Vergeet niet de cassette uit het toestel te « Volg altijd de aanwijzingen of restricties op halen, de stroom uit te schakeren en de aangaande het gebruik van elektronische VIEWCAM los te koppelen van zijn apparatuur in bijvoorbeeld een vliegtuig of in stroomvoorziening wanneer de VIEWCAM niet andere ruimten of gebieden. gebruikt wordt. Let op de temperatuur en vochtigheid. Richt de lens niet naar de zon.
Over uw VIEWCAM DV Technologie Digitale video, DV, is een revolutionaire technologie die u in staat stelt beelden van hoge kwaliteit op te bermen en weer te geven met gebruik van speciale digitale functies, voorheen onbereikbaar met conventionele analoge formaten. * Hoge horizontale resolutie Gedetailleerde, scherpe breiden met de hoogste horizontale resolutie voor privé gebruik.
Bijgeleverde accessoires Nestadapter Netsnoer Infrarood afstandsbediening Digitale kabel Lithiumbatterij type CR2025 X 2 Schouderriem Lensdop 30 minuten Mini DV cassette Bij dit product zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.
inhoud Samenvatting Namen van onderdelen 3] bediening In-beelddisplay index 5| e —— Snel opzoeken 6 ! WaarschuwingsindiCators oo 7 Voorbereiding Plaatsen en verwijderen van de accu ..ol 8 Laven van de act ..o a VIEWCAM via een stopcontact van spanning voorzien 10 Plaatsen en verwijderen van een Mini DV cassette 11 Afstelen van de greenpriem . Gebruik van de lensdop Bevestigen van de schouderriem .
Namen van onderdelen Voor details omtrent het gebruik van eik orderdeel dient u de tussen haakjes aangegeven bladzijde te raadplegen. Stereo-microfoon [blz. 66) Zoomlens Rogje voor schouderriem [blz. 12] Microfoonaansluiting (MIC) [blz. 68] audiovideo aansluiting [blz. 21, 64} Afdekking aansluitingen [blz. 21] Met de kiep van de cassettehouder geopend Cassettehouder [blz. 11] Ontgrendeling voor cassetteouderklep [blz. 11] Lithiumbatterijhouder fblz.
Achteraanzicht Opname (REC START/STOP) [blz. 17] LCD monitorscherm GroothogkfTele (W/T) ‘ reothoek/Tele (W/ ONTROL schakelaar motorzoomregelaar [blz. 18] Iolz. 23] i Volumeregelaar (VOL.) [blz. 20] SNAP toets PC aansluiting [blz. CONNECTIE) [blz. 68] Rogje voer Afdekking schouderriem aansluitingen [blz. 12] [biz. 21] it Handgreep S-VIDEO aardsluiting bz, 12] Tblz. 21, 64] Sparingsschakelaar (CAMERA/ Bedieningstoetsen [biz. 24] VCR keuzeschakelaar) [pblz. 23] DC IN aansluiting [blz. CHARGE indicator {blz.
Snel opzoeken Deze lijst bevat een aantal voorbeelden van vaak gebruikte mogelijkheden van de VIEWCAM. * Opnemen van extreme close-ups. —Zie bladzijde 27 {Instellen van de digitale zoom) + Opnemen van een onderwerp in tegenlicht. —Zie blad diafragma) « Opnamen maken in het donker of bij slechte verlichting. —Zie bladzijde 30 {"Kattecog” functie bij weinig licht} * Snel controleren wat u zojuist heeft opgenomen.
EJECT THE Samenvatting bediening Waarschuwingsindicators’ EJECT THE A CASSETTE. CASSETTE. CASSETTE verwijderd (zig blz. 11). Ris condens in ge VIEWCAM gevormd. Wacht een A paar uur fot de condens is verdampt (zie biz. 72). DEW “DEW De VIEWCAM schakelt ongeveer 10 seconden na het verschijnen van deze aanduiding automatisch uit. o De accu is bijna uitgeput. Vervang de accu door B?BgEfigwl S ween die geheel is opgsiaden (zie blz. videokoppen zijn vuil en dienen te worden Q Q gereinigd (zie biz. 73).
Plaatsen en verwijderen van de accu Plaatsen van de accu 1 Leter op dat de spanningsschakelaar op OFF staat. Spanningsschakelaar 2 Schuif, met de lens naar boven wijzend, de ontgrendeling voor accuvakafdekking naar OPEN (T') en open de accuvakafdekking (7). Ontgrendeling Voor accuvakafdekking 3 Steek de accu in het accubak met het A merkteken naar boven en duw hem helemaal naar binnen totdat de accu op zijn plaats vastklikt.
nd 9 Voorbereiding Laden van de accu 1 Steek de accu in de VIEWCAM (zie blz. 8). Let er op dat de spanningsschakelaar op OFF staat. » De accu zal niet worden opgeladen wanneer de spanningsschaxelaar op CAMERA of VCR staat. Sluit het netsnoer aan op de nestadapter en doe de stekker in het stopcontact. Steek de gelijkstroomstekker van de nestadapter aansluiting op de VIEWCAM. * De CHARGE indicator zal rood oplichter.
e ——t i Let op: VIEWCAM via een * STOP ALTIJD EERST DE BAND EN SCHAKEL stopcontact van spanning DE STROOM UIT VOOR U DE Voorzien GELIJKSTROOMSTEKKER ERUIT HAALT. Als u de gelikstroomstekker eruit haalt terwijl u nog aan het opnemen of afspelen bent, zal de band rond de trommel met de videokoppen gewonden blijven, wat de band kan beschadigen.
Voorbereiding Plaatsen en verwijderen van een Mini DV cassette Plaatsen van een cassette 1 voed de VIEWCAM, verschuif de en open de cassetteouderklep. * De cassetichouder wordt automatisch uitgetrokken en komt naar buiten. e, | Crtgrendsiing voor | =g | cassetteouderklep S, o 2 Plaats de cassette met het venster naar buiten gericht en het wispreventislipje boven. 3 Druk op de PUSH merkteken totdat de houder op zijn plaats vastklikt.
Afstellen van de greenpriem Haal de lensdop van de lens voor u gaat opnemer (D) en doe het mouwtje van de i iy lensdop aan de clip (2} zodat de lensdop u Open de flap van de handgreep (1)} en riet in de weg Zi, greenpriem 2 Maak de greenpriem los, doe uw hand duim in d Opmerking: 00r de lus en breng uw duim in de * Plaats de lensdop altijd oo de lens wanneer u de buurt van de motorzoomregelaar. Trek VIEWCAM nicht gepruikt, de Kiitstrip vervolgens strak zodat de ) greep goed om uw hand zit.
Voorbereiding Installeren van de lithium 5 Sluit de cassetteouderklep door in het e midden ervan te drukken totdat hij op geheugenbatterij Zijn plaats vastklikt.
Voorbereiding Instellen van het gebied,de 3 datum en tijd Voorbeeld: Instellen van de datum op 2 juni, 2000 (2. 6.2000) en de tijd op 10:30 's morgens {10:30) in Parijs. staande procedure Uit gaat voerman, moet U controleren of de lithiumbatterij in het toestel zit (zie biz. 13). Als u zich bevindt In een land waar zornert; wordt gepruikt, dient u echt de standaard te steile.
8§ Druk toets om “2000” (voor het jaar) te kiezen en druk vervolgens op de SET toets. 6.2000 g0 9 Druk toets om “10” (voor het uur) te kiezen en druk vervolgens op de SET koets. R SETTING 2. 6.2000 s 10:88 10 Druk toets om “30” (voor de minuten) te kiezen en druk vervolgens op de SET toets. * De interne kick gaat nu lopen. SETTING : 2. 6.2000 10:30 11 Druk op de EXIT toets (MODE DISPLAY) om het menuscherm te sluiten.
Eenvoudig opnemen met de volautomatische functie Volg voor het starten van de opname eerst de aanwijzingen ap bladzijden VIEWCAM voor te bereiden voor opname. REC START/STOP toets Sganni ngssr‘hakniaav 1 Verwijder de lensdop. 2 Houd de vergrendeltoets ingedrukt en schuif de spanningsschakelaar naar CAMERA. * Het veel U w menitorscheri. * De VIEWCAM is nu klaar om op te nemen {opnamestandbyfunctie).
Zoomen Tips voor houdingen bij opname Door te zoomen kunt u een onderwerp dichterbij brengen of verder weg plaatsen zonder dat u daarvoor van standpunt hoeft te veranderen. Met cie draaibare LCD monitorscherm kunt u gemakklik video-opnamen maken in een natuurlijker houding, zonder dat de VIEWCAM de hels tijd voor uw oog moet houden.
Basisbediening Camera-opname e A — Resterende opnametijdsaanduiding Wanneer de VIEWCAM in de camerafunctie aan het opnemen is, zal een indicator op het scherm de geschatte resterende opnametijd aangeven. 10 min -8 min. 8 min.-& min. [column 6 min.-4 min. [CcImERO0 4 min.~2 min [ Immoon 2 min.—1 min. [=oimnoon THE TAPE ENDE SCHOON. 1 min~0 min. + TAPE END Y CHARGE THE O min. CASSETTE. {Het einde van de 3 band is bereikt.
Weergave Via het LCD mentorscherm kunt u onmiddellijk terugzien wat u zojuist heeft opgenomen. U hoeft niet allergie! ‘asuge verbindingen te maken en het beeld kan direct op het scherm van de Lcd-monitor worden getond en het geluid kan direct via de ingebouwde luidspreker worden weergegeven LCD monitorscherm Span 1 Houd de vergrendeltoets ingedrukt en schuif de spanningsschakelaar naar VCR. * Het schram vers —p [/l VCR OFF, v @ sp CAMERA AUDIT 142 play/ .
Basisbediening Weergave Bekijken van de weergave op 2 Verbind de VIEWCAM met uw TV of een Tv videorecorder middels de bijgeleverde zoals afgebeeld. U kunt ook uw VIEWCAM aansluiten op een TV en zo gen groter publiek laten genieten van uw opnamen. Ltetop: « Controleer cat de VIEWCAM, TV, videorecorder en evenveel andere apparatuur is Uitgeschakeld alvorens de verbindingen te maken.
Beeldzieken Stilbeeld De video-zoekfunctie maakt het gemakkelijk Met de stilstaand beeldfunctie kunt u de een bepaalde gewenste scene op de band op weergave pauzeren. te zoeken Druk tijdens weergave op de PLAY/STILL toets 1 Druk tijdens weergave op voorwaartse (r11). zoektoets (of achterwaartse zoakinots (w4} L.
Gebruik van de bedieningsorganen De volgende bedieningsorganen van de VIEWCAM kunt u gebruiken om de diverse functies, instellingen en in-beeld displays te bedienen.
Bedieningstoetsen De bedieningstoetsen worden gebruikt om de opname en weergavefunciies op de schermen te kiezen. Druk op de bedieningstoets die cversenkomt met de aanduiding van de gewenste functie zoals die wordt weergegeven op het scherm. MOES DISPLAY Opmerking: + De indicators voor de tedieningstosisen zijn normaal gesproken blauw. Wanneer er een functie gekozen wordt zal de bijbehorende indicator geel worden.
Bediening van de in-beeld displays e Gebruik van de menuschermen De menuschermen kunnen worden gepruikt om de diverse instellingen van de VIEWCAM te wijzigen. * De op deze bladzijde getoonde voorbereiden Geiden voor de camerafunctie. 1 Houd de vergrendeltoets . = _von ingedrukt en schuif de 3 spanningsschakelaar naar CAMERA of VCR. 2 Druk op de ONTROL schakelaar totdat verschijnt. = & gms AUTO & PLC] MENU [ TUREN | "MENUEFF. woREDSLY Druk op de MENU toets om het menuscherm te openen.
Opname met de LP functie (verlengde opnamefunctie) Deze VIEWCAM stelt u in staat om met gen LP (verlengde) opnamefunctie ongeveer 50% langer te kunnen omriepen met een vergelijkbare beeldkwaliteit als in de SP (standaard) opnamefunctie. 1 Open het menuscherm in de opnamestandbyfunctie (zie blz. 25). 2 Gebruik de ONTROL schakelaar (1), kies “TAPE SPEED” en druk vervolgens de ONTROL schakelaar (Z:) in om “LP” te kiezen.
Handige functies Camera-opname Instellen van de 16-bits audio opnamefunctie Deze VIEWCAM stelt u in staat om te kiezen tussen een 12-bits en een 16-bits audio opnamefunctie. Norma! gesproken zal de VlEWCAM geluwd opnemen met de 12-bits 1 Open het menuscherm in de opnamestandbyfunctie (zie blz. 25). 2 Gebruik de ONTROL schakelaar (1), kies “AUDIO MODE" en druk vervolgens de ONTROL schakelaar in om “16BIT” te kiezen.
= Digitale “kick” zoom (Verlengde zoom) De digitale “kick” zoomfunctie stelt u in staat ogenblikkelijk op een onderwerp in te Zoomer. U kunt kiezen wit drie bereiken voor de digitale “kick” zoomfunctie, 2, 4x of 10X Gebruik van de digitale “quick™ zoom 1 Druk op de ONTROL schakelaar totdat verschijnt (camerafunctie). Auto iy EXIGI&MA‘ }QK; ‘ TeNDIEFF.
Handige functies Camera-opname Gamma Helderder maken van het beeld helderheidscompensatie Druk nog een keer op de BAMA EFF. toets Als het onderwerp van achteren verlicht worgt * 02 B indicator verschijnt. (tegenbelicht), is het mogelik dat het BAMA cpnameresuitaat iets te donker is. De gamma EFF. ctert het beeld >/ beeld aan te taaien. 1 Druk op de ONTROL schakelaar totdat verschijnt (camerafunctie). Opmerking: * Warner de M indicator vers Opmerking: Op pikken met onvoldoende .
N “Kattenoog” functie bij weinig licht Indien u in een donkere of smiecht verlichte omgeving openen, verschijnt de “LIGHT” indicaicr op het scherm. Gebruik de beeldsignaalversterkingsfunctie voce een helderder beeld. T Druk op de ONTROL schakelaar totdat verschijnt (camerafunctie). Opmerking: "LIGHT” wordt niet getoond dien de verlichting voldoende is. Ds beeldsignaalversterkingsfunctie kan in dit geval niet worden gebruikt. Druk sen keer op de BAMA £FF.
Handige functies Camera-opname Digitale beeldstabilisatie (DIS) De digitale beeldstabilisatie (DIS) functie is standaard ingeschakeld om het breid te stabiliseren door elektronisch te compenseren telalg relatief Kleine bewegingen van het beeld aak storend kunnen werken bii storend kunnen werken bij close-up opnamen. DIS indicator L De DIS functie kan geen compensatie maken voor extreme trillingen of in geval van de hieronder beschreven situaties.
Snel terug Gebruik de functie voor “snel terug” wanneer u een zojuist gemaskie opname even heeft afgespeeld maar de opname vervolgens weer snel vanaf het eindpunt van de laatst opgenomen scene wilt vervolgen. 1 Druk tijdens de opnamestandbyfunctie op de ONTROL schakelaar totdat B verschijnt. AUTO < RE|TIME | ‘ TURN ! CODE CCoCOoOO 2 Druk op de RETURN toets « De band begint vooruit of terug te spoelen naar het eind van de laatst opgenomen scene.
Handige functies Camera-opname D L — In-en uitregenen (fade in& VACATIËN: Het beeld komt op vanuit een fad i animatie van gen auto met de tiet! "HAPPY aae ou ) VACATION!" en wordt uitgeregend naar wit. De face-functie stelt u in staat om beeld en geluid geleidelijk te laten opkomen of verdwijnen aan het begin of het eind van een scene om aldus scene-overgangen e maken Deze VIEWCAM beschikt over een normale en vier animatie-fade-functies.
2 Gebruik de ONTROL schakelaar kies “FADE” en druk vervolgens de ONTROL schakelaar gewenste fade-functie in te stellen. = MENU TEMET HORMAL —> HOLIDAY 1 & PARTY BIRTHDAY L vacatiën < 3 Druk op de EXIT toets (MODE DISPLAY) om het menuscherm te sluiten. Gebruiken van de fade-functie 1 Druk tijdens de opnamestandbyfunctie op de ONTROL schakelaar totdat verschijnt. TR& ‘@ Ao Blaauw COCOON 2 Druk op de FADE toets * De aanduiding "FADE” wordt gee! plaats van blauw en de gekozen functie indicator verschijnt.
oelema Mj 35 Handige functies Camera-opname e — Automatisch scherpstellen De VIEWCAM is standaard ingesteld op de automatische scherpstijlfunctie, die speciaal is ontworpen om op de meeste soorten onderwerpen scherp e kunnen stellen. De VIEWCAM stiet dan scherp op het midden van het beeld.
Opname van een stilbeeld U kunt stilstaande beelden opnemen van onderwerpen met behoud van geluid door een van de drie stilbeeld opnamefuncties te kiezen Soorten stilbeeld opnamefuncties SNAP: Er wordt 8 seconden lang een stilstaand breid (momentopname) cpgencmen. STIL: Er wordt do (!opent ce beeld opga FOTO SHOT: Er wordt 8 seconden lang sen stilstaand beeld opgenomen na de geluiden beeldeffecten van een afgaande sluiter van gen fotocamera.
Handige functies Camera-opname Meervoudige StI‘ObOSCOOp3 Gebruik de ONTROL schakelaar om “MULTI FRAME" te kiezen en druk opname vervolgens de ONTROL schakelaar deelbeelden) of “16" (16 De meervoudige s"obosvoop oprarmefunctie deelbeelden) in te stellen. wielt u in staat een sne! bewegend onderwerp op te namen met tussenpozen van 1/10 @ él %? seconde deelbeelden.
Gebruik van de afstandsbediening Bedien de VIEWCAM met de ufs\arcsbndlomrg als u zelf ook in de opname wilt voorkomen, of als u de VIEWCAM op een TV heeft aangesloten voor gebruik als een videorecorder. 1 Richtte afstandsbediening omlaag en verwijder dan de batterijhouder door t . het lipje naar het midden te drukken. 2 Steek de meegeleverde lithiumbatterij in de houder met de + kant van de batterij naar de @ kant van de houder. 3 Plaats de batterijhouder weer terug in de richting van de pijl.
Handige functies Camera-opname Delfopname De Lcd-monitor kan 180° worden gekanteld zodat de opgenomen personen het monitorscherm kunnen zien. Op deze manier kunt u zichzelf opnemen terwijl u uw eigen beeltenis cp het scherm kunt blijven zien. U kunt een zeliporiret opnemen, of met de afstandsbediening opnamen maken van uzelf en uw vrienclen op een feestje bijvoorbeeld. Normale zeefopname 1 Druk de spanningsschakelaar naar CAMERA. 2 Draai het monitor-gedeelte 180° verticaal.
Delfopname van een boodschap In de zeefopnamefunctie kunt u een korte videoboodschap voor iemand opnemen. Deze mogelijkheid komt van pas bij het samenrsteilen van videobrieven. * Voer stappen 1 t/m 3 van “Normale zeefopname” op bladzijde 39 uit. Voer daarna de hieronder peschireven sjappen Uit ETEND toets REC START/ MASSAGE toets | REC STOP toets Ty T [ @880 1 Druk op de MASSAGE toets het zeefopname boodschap scherm te spenen. MES [ }hic SAGE }TAKT\ PREES REC START FOR LAVING TOUR MASSAGE.
Handige functies Camera-opname Instellen van de volautomatische functie voor de VIEWCAM Deze VIEWCAM is voorzien van automatische belichting, autormnatische scherpstelling, automatische instelling van de siuitertiid, automatische witbalans, en automatische diafragma. Gebruik de volautormatis functie voor het eenvoudig opnemen van beelden van hete kwaliteit.
U kunt de op deze bladzijde beschreven functies uitvoeren via de meegeleverde afstandsbediening. SLOW toets — PLAY toets F ADV/STROBE tels Slow-motion De functie voor vertraagde weergave stelt u in staat het breid in slow-motion af te spelen.
Handige functies Weergave Scénezoeken 3 Druk op de REW (of FF toets. » De band wordt naar het begin van de scene voor (of na) de huidige positie teruggespoeld {(of doorgesgoeld), waarna de weergave automatisch start, Met de scénezoskiunctie kunt u automatisch het begin van een aantal reeds opgenomen scenes opzoeken en daarvan de weergave starten. U kunt met deze functie maximaal 10 verschillende fragmenten (scenes) automatisch opzoeken.
Gebruik van de tijdcode De tijdcode geelt de uren, minuten en seconden van de opname en beeldnummer aan (1 beeld = ongeveer 1/25 sec.). Deze gegevens worden automatisch met het onderwerp opgenomen. U kunt de tijdcode als een zeer precieze teller in zowel de videorecorderfunciie als de camerafunctie op het scherm laten verschijnen.
Handige functies Weergave A — Gebruik van de bandteller De bandteller lala de verstreken weergave of opnametijd zien in uren, minuten en seconden. (De teller telt ook verder tijdens bandtransport wanneer de aanduiding niet op het display wordt getoond.) De teller kan zowel tijdens de videorecorderfunctie als de camerafunctie worden ingesteld en gebruik. Videorecorderfunctie 1 Druk op de ONTROL schakelaar totdat verschijnt.
Bandtellersgeheugen Gebruik het bandtellersgeheugen wanners u terug wilt keren naar het begin van een bepaalde scene. De positie waar de teller op nui (M 3:00:00) werd gezet is opgeslagen in net geheugen om het gemakkelijker te maken naar dat punt op de band terug te keren, 1 broek tijdens weergave op de ONTROL schakelaar totdat verschijnt.
Handige functies Weergave Piep Deze VIEWCAM geeft geluidssignaien in de volgende situaties. Enkele piep Wanneer de sparingsschakelaar van OFF naar CAMERA of VCR wordt gezet.
Scenemenu (Programma AE) Annuleren van de scene-instelling Kies “SCENE MENU" bij stap 2 hierboven. U kunt kiezen uit vier scene-instellingen om de beste resultaten te kunnen krijgen voor de Opmerkingen: opnamesituatie waar u zich voor gesteld ziet. » Zelf nadat u de scene-indicaor heeft De belichting, witbalans en siultertiid worden uitgeschakeld, zal ds gekozen scene-instelling autornatisch met de VIEWCAM voor deze ingeschakeld blijven.
Geavanceerde functies Camera-opname Beeldeffecten Deze beeldeffecten stellen u in staat het onderwerp op een meer dramatische wijze in beeld te brenger. Soorten beeldeffecten B/W ERF: Het beeld wordt in zwart-wit opgenomen. SELA ERF: Het beeld wordt opgenomen in sepia tanen zoals die van oude foto's. MOSAIC: Het beeld wordt opgedectd in vierkantjes alsof het betegeld is. SOLAIR: Het contrast van het beeld wordt verhoogd zodat er een kunstig bewerkt beeld ontstaat.
A Handmatig scherpstellen Mocht het moeilijk lukken om goed automatisch scherp te stellen, bijvoorbeeld onder de in de tabel getoonde omstandigheden, schakel dan over op de handmatige scherpstijlfunctie van de VIEWCAM om met de hand scherp te stellen. Cnderwearp is enderbaliche, bijvea Fra Onderwerp beweeg! stel.
Geavanceerde functies Camera-opname Instellen van de sluitertijd 4 De sluitertijd van de VIEWCAM staat normaal gesproken ingesteld op de standaard sluitertijd (1/50 sec ). Athankeiijk van het onderwerp of de situatie kunt u naar wens een meer geschikte stuitertijd instellen om een beter beeld te krijgen. 1 Druk tijdens de opnamestandbyfunctie op de ONTROL schakelaar totdat verschijnt.
Aanbevolen sluitertijden Een snellere sluitertijd resulteert in een donkerder beeld. Kies de sluitertijd in overeenstemming met de bch"htmg » Opnemen van sportactiviteiten op een heldere dag. = Opnemen op een heldere dag in de Sneeuw. sec. i sec. * Priemen van sportactiviteiten buitenshuis op een ietwat bewolkte dag. * Opnemen door esn autoruit (wanneer u waas doper cameratrillingen wilt minimaliseren). sec l 1/250 sec =Wanneer u het licht wilt halveren. Gebruik in plaats van gen ND2 filter.
Geavanceerde functies Camera-opname Witbalansvergrendeling De kleur van het onderwerp op het scherm kan verschillen afhankelijk van de verlichtingsomstandigheden. De VIEWCAM is normaal gesproken ingesteld op automatische instelling van de witbalans, zodat de kleur van het beeld automatisch gecorrigeerd wordt voor de huidige verlichtingsomstandigheden De automatische witbalans functioneert r t naar b onderwerpen.
Handmatig diafragma De VIEWCAM staat normaal gesproken op automatische instelling van de diafragma, waarbij de optimale lensopening automatisch wordt ingesteld. Indien het contrast gua helderheid tussen het onderwerp en de achtergrond echter te sterk is, kunt u met de automatische functie magalik gen helder b ik in dit stelling om de handmatige diafragma diafragma te corrigeren. onderwerp in tegen. Achtergrond cht). .
Windscherm De windschermfunctie stelt u in staat bij ds cprame het storende geruis van de wind te verminder. 1 Open het menuscherm in de opnamestandbyfunctie (zie blz. 25). 2 Gebruik de ONTROL schakelaar (1), kies “WIND” en druk vervolgens de ONTROL schakelaar (7)) in om “ON” te kiezen. MENU AUDIT MADE_C1281T REMOTE DEMO MODE : OFF l LANGUAGE v e ! exit 3 Druk op de EXIT toets (MODE DISPLAY) om het menuscherm te sluiten.
Geavanceerde functies Camera-opname Wereldkiosk 3 Druk de ONTROL schakelaar in om “1 LONDEN” te kiezen. De wereldkioskfunctie stelt U in staat om op een * De VIEWGAME stelt nu de tijd voor gemakkelifke manier de ingebouwde klok van Londen in. dit toestel aan te passen aan de lokale tid T ] wanneer u de VIEWCAM met u meeneemt op ! WENT reis rond de wereld * Stel net gebied, de fatum en de tjd in voor uw eigen tijdzone, als u dat nog niet gedaan heeft (zie blz.
Weergavezoon De weergavezoomfunctie stelt u in staat het weergegeven beeld tot maximaal 10 keer te vergroten. 1 Druk tijdens weergave op de ONTROL schakelaar totdat B verschiing. AUDIT 142 2000 ACH Era oCCoO0O 2 Druk op de PB ZOOM toets om het weergavezoon instelscherm te openen. 3 Duw de ONTROL schakelaar naar boven om in te zoomen, 4 Druk op de 4 b ¥ toets om het weergegeven beeld te verschuiven. Annuleren van de weergavezoon Druk op de EXIT toets (MODE DISPLAY).
T — Gamma weergave De gamma weergavefunctie verbetert het beeld door de helderheid van het onderwerp te verhogen zonder de heldere partijen van het beeld aan te tasten 1 Druk tijdens weergave op de ONTROL schakelaar totdat verschijnt. (4 5P ] AUDIO 1+2 < gwTme P |CODE wesosn N ~ COCCOoC 2 Druk op de BAMA PB toets * De aanduiding "GAMMA" verschijnt en het beeld wordt helderder. L TEM P8 CODE M I T8DE ] Annuleren van de gamma weergave Druk nog een keer op de BAMA P8 west.
Geavanceerde functies Weergave Overlappen van stiibeeiden 3 Druk op de EXIT toets (MODE DISPLAY) om het menuscherm te De functie var het overlappen van gen sluiten en druk vervolgens op de MODE stilbeeld kan worden gebruikt voor het DISPLAY toets om het functiescherm te oplossen van verschillende beider sluiten. weergave.
Wiep De wiep functie kan worden gebruik om een breiende presentatie van weergegeven beelden samen te stelen waarbij esn stilbesid wordt vervangen door het volgende beeld dat opkom vanuit het midden van het scherm. Voorbereiding 1 Plande overgang van de scene en neem een stilbeeld met de stilbeeldfunctie op (zie blz. 36).
[ 63 Geavanceerde functies Weergave Beeldeffectweergave Met deze beeldeffecten kunt u de afgespeelde beelden een dramatischer draai geven. Soorten beeldeffecten B/W ERF: Het beeld wordt in zwart-wit weergegeven. SELA ERF: Het beeld wordt weert: sepiatonen zoals op oude foto's. MOSAIC: Het beeld wordt opgedeeld invierkanties alsof het betegeld is. SOLAR!: Het contrast van het beeld wordt verhoogd zodat er een kunstig bewerkt beeld ontstaat.
Monteren Middels videomontage kunnen onnodige scenes worden uitgeknipt en scenes in gen andere volgorde worden gezet.
'Geavanceerde functies Weergave stat Monteren naar video apparatuur via de DV aansluiting (IEEE1394) Deze VIEWCAM stelt u in staat digitaal video te monteren met de VIEWCAM ais de signaalbron. Snuit de VIEWCAM azn op video apparatuur met een DV aansluiting met behulp van de bijgeleverde DV kabel.
Audio-dubben U kunt commentaar toevoegen aan met de VIEWCAM gemaakte opnamen met de ingebouwde microfoon of met een externe microfoon, met behoud van de originele audio en video opnamen. e Ingebouwde staregomicrofoon Naar de MIC aansluiting MIC aansluiting* Externe stereomicrofoon *Meer over de MIC aansluiting Deze externe microfoonaansiuitin gelijkstreomveitage van 4,0 Vol Deze is alleen bekoeld voor gebruik met microfoons die voldoen aan s vermeld op bladzijde 77.
Geavanceerde functies Weergave S —— Audio-dubben Opmerking: * Audio-dubben is niet mogslik met cassettes die met de LP functie zijn opgenomen. 1 Startte weergave van de opgenomen Mini DV cassette en zoek het punt vanaf 2 Druk op de PLAY/STILL toets om de weergave te pauzeren. 3 Druk op de ONTROL schakelaar totdat verschijnt. 2. AUDIT 1+2 SP BB |AUDIOS | i 2001 0UB. 4 Druk op de AUDIO DUB. toets om het audio-dub scherm te openen. tAUDm AUDIT QUB. DuB.
Kiezen van de audio weergavefunctie U kunt een van de volgende audio weergavefuncties kiezen. Audio 1+2 * 12-bit opname stereo (Audio 1 en Audi 2 alen) = 16-bit opname stereo (inkeken rechierkanalen) Audi 1 . 12 bit opname stereo (alleen Audio 1 kanaal) 16-bit opname mono (alleen linkerkanaal} Audio 2 * 12-bit opname stereo {alleen Audi 2 kanaal) « 16-bit opnarne memo {alleen trechterkanaal} 1 Start de weergave van de Mini DV cassette met het ingevoegde geluid. 2 Open het menuscherm (zie blz. 25).
Handige informatie Tips voor betere opnamen * Houd hat anderwerf in het modder, Met de automatische scherpstijlfunctie wordt scherpgesteld op het onderwerp dat in het midden van de scene is, Laats het onderwerp nnhat midi Stel met de hand scherp indien het onderwerp niet in net midden van het scherm bevindt (zie blz. 50) * Vermijd het opnemer van onderwerpen dis van richt (tegenbelicht).
Mini DV cassette Bescherming tegen “per ongeluk” wissen (Wispreventie) Schuif het wispreventielipje aan de achterkant van de Mini DV cassette naar "SAVE" zodat uw opname niet per ongeluk worden gewist Voorzorgen bij gebruik van een Mini DV cassette Wispreventiaiipje * Gebruik uitsluitend Mini DV cassettes voorzien van de markering. Schilt het wispreventistipje Nasr "HEC” leningen ¢ Deze VIEWCAM kan opnemen en U opnieuw op een reeds opgenomen cassette weergeven op en van Mini DV casselles wilt opnemen.
Aanhangsel A Accu Deze VIEWCAM werkt op een lithium-ion type accu. * De lithium-ion accu zal zichzelf langzaam ontladen, zelfs wanneer hij volledig geladen opgeborgen wordt. —Het verdient daarom aanbeveling de accu iets voordat deze wordt gebruikt op te laden (maximaal een dag van te voren). * De lithium-ion accu hoeft niet geheel ontladen te worden opgeborgen.
e Nestadapter De nestadapter kan de ontvangst storen indien deze in de buurt van een radix wordt gebrutkl. * Voorkom dat brandbare stoffen, vloeistof en metalen voorwerpen in de nestadapter. * De nestadapter is geheel afgedicht. Probeer et te openen of er veranderingen in te maken * Beschadig g de nestadapter niet, laat niet vallen en * Gebruik de net warme ruimten.
Ml 73 Aanhangsel Vuile videokoppen Bi gebruik van een vervuilde videoband nurken de videokoppen verontreinigd worden waardoor storing in het beeld ontstaat of er in het geheel niets meer op de band kan worden opgenomen. st K Gebruik van een reinigingscassette (los verkrijgbaar) Ce videokoppen kunnen op eenvoudige wijze worden gereinigd met een in de handel verkrijgbare reinigingscassette Opmerkingen: « Te vaak gebruik maken van de reinigingscassette kan echter de videokoppen beschadigen.
Demonstratiefunctie 4 Via de demonstratiefunctie kunt u een korte demonstratie belikken van de speciale VIEWCAM mogeliikkheden. Ais de demonstratie op het scherm verschijnt wanneer u uw VIEWCAM voor het eerst aan zet, dient u de demonstratiefunctie annuleren om uw 5 VIEWCAM te kunnen gebruiken. Opmerking: + Ue demonstratie wordt alleen in het Engels uligevoera.