Manual

Gain-up

When you are recording in a dark or poorly-

illuminated location, "LIGHT" is displayed on

the screen. Use the gain-up function to record

a brighter picture.

Note:

• At locations where lighting is adequate, "LIGHT"

will not appear. The gain-up function cannot be

used in this case.

GAMMA/BRIGHTER button

To obtain a brighter picture

Press the GAMMA!BRIGHTER button again.

• The _ indicator appears.

Illfll /

BRIGHTER

GAMMA

AUTO

In TAPE-CAMERA or CARD-CAMERA mode,

press the GAMMA/BRIGHTER button once.

• "GAMMA" appears, indicating that the gain-up

function is now working.

Illfll /

BRIGHTER

To cancel the gain-up function

Press the GAMMA/BRIGHTER button until

"GAMMA" disappears.

Notes:

• Some picture noise appears in Gain-up mode.

The picture noise increases when the x:::[::><::]_

indicator is displayed.

• When the _ indicator is displayed, a

residual image may appear behind a subject

that exhibits a lot of movement.

• Fine brightness adjustment is possible using the

manual exposure function (see page 51).