Manual

Card Recording
It is possible to take a still picture in the same
way as you do with a standard camera and
record that image on the SmartMedia card.
Media Selection switch
1
2
3
STILL button
Power Zoom control
1
Po_ 'er switch
Insert a SmartMedia card into the
camcorder.
Remove the lens cap, and lift up the
viewfinder.
Set the Media Selection a
switch to CARD.
6 Adjust the Power Zoom
control to frame the
subject as you desire.
Press the STILL button to
begin recording.
• The _ indicator flashes
red while data is being
recorded on the
SmartMedia card, and
returns to white when recording completes.
AUTO Z_c,_Ar_D_t
I0190
Notes:
• Recording under insufficient lighting may result
in blurred images. It is recommended that you
use a tripod to record insufficiently illuminated
subjects.
• Recording under the light of a fluorescent,
mercury, or sodium lamp may cause flickering in
the image and, depending on the timing of the
shot, may result in changes to color hue in the
image.
Caution:
• Do not turn the power off while the _ indicator
is flashing in step 6.
4
Hold down the Lock button and set the
Power switch to CAMERA.
• The picture from the lens is now
displayed in the viewfinder.
Number of shots taken
Number of shots remaining
Lock button
5 Perform steps in"Selecting a still
recording effect" to select the desired
still recording effect (see page 40).
74