Service manual

VL-Z1U
11
4.
· Disconnect the six FPCs of the head amp circuit board
unit.
· Remove the two screws ((a) XiPSN17P02000) and
remove the head amp PWB unit.
· Remove the three screws ((w) LX-BZA022WJFN) and
remove the screw ((k) LX-BZA023WJFD).
· Remove the mechanism with the cassette lid opened.
5.
· Remove the screw ((x) LX-HZ0050TAFN).
· Remove the two screws ((d) XiPSF17P02000) and remove the cassette
lid.
6.
· Remove the two screws ((d) XiPSF17P02000).
· Disconnect the connector of the speaker while removing the KS upper
lid cover with the cassette control lid opened.
· Remove the screw ((d) XiPSF17P02000) and remove the lock support
cover.
· Remove the speaker.
x
Cassette lid
d
d
d
d
d
Connector
Speaker
Lock support cover
KS upper lid cover
k
a
a
w
w
w
Mechanism
Head amp PWB unit
FPC