Service manual

160
VL-SD20U
VL-Z1U
VL-Z1U SERVICE JIG SPECIFICATIONS
1-1. Adjusting jigs for checking the mechanism
No. Name New part Type number, Application Part code Code
1 Cassette torque meter for PB 1mN·m/1.5mN·m 9DASD-1015 DB
2 Torque gauge For measurement of VS-REW winding torque. JiGTG0045 CN
3 Torque gauge head For torque gauge shown left. 9EQTGH-DH5000 BW
4 Tension gauge 4N For measurement of pinch roller press force. JiGSG0400 BK
5 Dial tension gauge PTG-10 9DAPTG-10-10W CA
6 Torque driver 150mN·m No. 0 cross bit, No. 00 cross bit JiGTD1500RTDH CB
7 Master plane For checking of height of reel table0. 9EQMP-VLPD1 CL
8 Height adjustment jig For height adjustment. 9DAHG-PD1 BZ
9 Driver for height adjustment For adjustment of guide roller. 9EQDRiVER-DH5 BC
Bit shape.
10 Alignment tape - (I) Adjustment of running system(Linear signal) VR3-GAZXS CF
11 Alignment tape - (II) For adjustment of SW point(Color bar signal) VR3-GTZQS CG
12 Bit for hexagon nut with opposite side For installation of Tu guide nut. 95CM22001 BL
distance of 3 mm
13 Reel hub for back tension measurement Refer to Service Manual. Prepared in the service station. –
14 String for measuring the pinch roller pressure Refer to Service Manual. Prepared in the service station. –
1-2. Parts for periodical inspection and maintenance
No. Name New part Type number, Application Part code Code
1 Oil Cosmo Hydro HV22 9EQ-OiL-HV22 AE
2 Cleaning paper Dusper ∑ (SIGMA) ozu Co., LTD JiGDUSPER AP
3 Grease: Moly Coat YM-103 Dow corning 99FGREASE-YM103 AH
4 Dry greace CFD-409Z Sankei Chemical –
5 Loctite adhesive (1401B) Three Bond –