Specifications
![](/manual/sharp/vl-z400s/specifications-english/images/img-16.png)
Preparation
6
Preparation
Preparation
Attaching and
Removing the Battery
Pack
Attaching
1 Make sure that the Power
switch is set to OFF.
2 Open the LCD monitor to a 90° angle
to the camcorder body.
3 Slide the battery pack in the direction
of the arrow with the “m” mark facing
out.
4 Push the battery pack in the direction
of the arrow until it clicks.
Power switch
“m” mark
90°
VL-Z400S-GB-006-021 04.3.12, 7:56 AM6