User Manual

Preparation
13
• Do not short-circuit, recharge, disassemble,
or heat the lithium battery.
• Should the lithium battery leak, wipe the
battery compartment clean, and then insert a
new battery.
• The lithium batteries will last about one year
under normal usage.
Selecting the Language for
the On-screen Display
Available modes:
Tape Camera, Card Camera
This camcorder allows you to choose
Chinese or English as the on-screen display
language.
Setting
1 Hold down the Lock button and set
the Power switch to v.
• The language selection screen
appears.
2 Press l or m on the Operation
button to select the desired language,
then press the center of the Operation
button.
Changing
1 In Tape Camera or Card Camera
mode, press the DISPLAY button until
the mode screen appears.
2 Press l or m on the Operation
button to select “MENU”, then press
the centre of the Operation button.
3 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
4 Press l or m to select Z, then press
the centre of the Operation button.
5 Press l or m to select “LANGUAGE”
(“
”), then press the centre of the
Operation button.
6 Press l or m to select “EXECUTE”,
then press the centre of the Operation
button.
•
The language selection screen appears.
7 Press l or m to select the desired
language, then press the centre of the
Operation button.
• The menu screen displays in the
language selected.
8 Press the DISPLAY button to turn off
the menu screen.
LANGUAGE
ENGL I SH
AU T OAUTO
OTHERS 1
BEEP
REMOTE
DEFAULT
LANGUAGE
RETURN
PHONES VOL
DEMO MOD E
LANGUAGE
ENGL I SH
EXECUTE
RETURN
1
ENGL I SH
Power switch
Operation button
DISPLAY button