Operation References LIQUID CRYSTAL DISPLAY CAMCORDER MODEL Preparation VL-NZ100U VL-NZ150U OPERATION MANUAL Basic Operations Useful Features Advanced Features Important Serial No.: • See page 79 for use of Demo mode. Appendix For assistance in reporting the theft or loss of this product, record on the line below the model number and serial number which are located on the bottom of the unit. Please retain this information. Model No.
Thank you for purchasing this camcorder from SHARP. The camcorder will enhance your home video enjoyment and allow you to capture those special moments. Please read this operation manual to familiarize yourself with the camcorder’s features, so that you will get the most out of it. The video techniques section will help you fully enjoy the many features this camcorder offers, and expand your video world. Important Information for Consumers in the U.S.
WARNINGCFCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT SAFEGUARDS 1. Read InstructionsCAll the safety and operating instructions should be read before the product is operated. 2. Retain InstructionsCThe safety and operating instructions should be retained for future reference. 3. Heed WarningsCAll warnings on the product and in the operating instructions should be adhered to. 4. Follow InstructionsCAll operating and use instructions should be followed. 5. CleaningCUnplug this product from the wall outlet before cleaning.
15. Power LinesCAn outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16.
Quick Operation Guide Please consult this operation manual further for details on these and other functions of your camcorder. Charging the Battery Pack 1 Attach the battery pack on the camcorder, and make sure that the Power switch is set to OFF. 2 Plug the AC adapter into a power outlet (1), then insert the DC plug into the DC input jack (2). Attaching the Battery Pack Power switch • The charge indicator lights up. DC input jack To power outlet 1 Make sure that the Power switch is set to OFF.
Inserting a Cassette 1 Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door. • After confirmation sound, the cassette holder extends and opens automatically. Cassette compartment door release Inserting a Card You can use an SD Memory Card or a MultiMediaCard for storing still images. 1 Make sure that the Power switch is set to OFF. 2 Slide the card slot cover release and open the card slot cover in the direction of the arrow.
Quick Operation Guide REC START/STOP button Power Zoom control/Volume control STILL button Zooming Push the Power Zoom control to T (1) (telephoto) or W (2) (wide angle) side. Power Zoom control SET button Tape Playback Operation button Media Selection switch Power switch Easy Camera Recording on Tape 1 2 3 1 Set the Media Selection switch to TAPE. 2 Hold down the Lock button and set the Power switch to VCR.
Card Recording 1 2 3 Card Playback Insert a card into the camcorder. 1 Set the Media Selection switch to CARD. Set the Media Selection switch to CARD. 2 Hold down the Lock button and set the Power switch to VCR. Hold down the Lock button and set the Power switch to CAMERA. • The images recorded on the card are displayed in a thumbnail format. • The picture from the lens now displays.
Supplied Accessories For VL-NZ100 For VL-NZ150 Standard-life battery pack BT-L225n* Standard-life battery pack BT-L225n* Extended-life battery pack BT-L445n* AC adapter UADP-0339TAZZ* AA batteryK2 CR2025 type lithium battery Audio/video cable QCNW-1979TAZZ Lens cap GCOVH1296TASA Lens hood GCOVA1870TASA Wrist strap UBNDT0145TASA Tripod adapter GDAI-A001WJZZ SD Memory Card VL-NZ100: 8 MB VL-NZ150: 16 MB USB driver CDSKA0081TA01 USB cable QCNW-A338WJZZ Remote control RRMCG0084TASA * The part n
Optional Accessories Standard-life battery pack BT-L225n Extended-life battery pack BT-L445n Note: • The listed model names are for U.S. accessories. For optional and additional accessories, contact your local dealer, call the Sharp Accessories and Supply Center at 1-800-642-2122, or visit SHARP’s website (http://www.sharp-usa.com).
Precautions • When the camcorder is not in use, remember to remove the cassette tape, turn off the power, and disconnect the camcorder from the power source. • Always respect prohibitions or restrictions on the use of electronic equipment on commercial flights or in other sensitive areas. • Do not aim the lens at the sun. Do not allow direct sunlight to strike the camcorder lens or LCD monitor screen, whether or not recording is in progress, as it may damage the CCD sensor or LCD screen surface.
Basic Operations Camera Recording Selecting the Camcorder Mode ................................... Easy Camera Recording on Tape in Full Auto Mode ....................................................... Zooming ....................................................................... Auto Focus ................................................................... Macro Shots ................................................................. Remaining Recording Time Display ............................
Contents Useful Features Advanced Features xiii Still Recording on Tape ................................................ Attaching the Supplied Tripod Adapter ....................... Wide Screen (16:9) ...................................................... Digital Image Stabilization (DIS) .................................. Self Recording ............................................................. Recording in LP (Long Play Recording) Mode ............ Selecting the 16-bit Audio Recording Mode .......
59 60 61 63 65 65 67 Picture/Backlight Adjustments ..................................... Turning off the Confirmation Sound ............................. Useful Information ........................................................ Demonstration Mode ................................................... Before Requesting Service .......................................... Specifications .............................................................. 68 69 70 79 80 82 • Guía de operación rápida en español .....
Operation References Operation References Operation References Part Names For details on the use of each part, refer to the page number indicated in brackets. Front view Stereo microphone Zoom lens DC input jack [pp. 10, 11] Cassette holder [p. 12] Lithium battery compartment door [p. 14] Cassette compartment door [p. 12] Cassette compartment door release [p.
Operation References Rear view Power Zoom Wide angle/ Telephoto control [p. 21]/ VOLume control [p. 23] DV terminal [pp. 50, 51] Media Selection switch (TAPE/ CARD selection switch) [p. 19] USB terminal [pp. 65, 66] AV jack [pp. 25, 48-50] Operation button Jack cover [pp.
Operation References Operation References Rear view RECord START/STOP button [p. 20] STILL button [pp. 33, 40, 55] GAMMA/ BRIGHTER button [pp. 29, 30, 40] FADE button [p. 31] Power switch (CAMERA/VCR select switch) [p. 19] SET button [p. 26] Remote sensor [p. 38] Speaker MENU button [pp. 6, 26] MANUAL button [p. 6] Card slot cover [p. 13] Bottom view Battery release [p. 9] Wrist strap loop [p. 17] Tripod adapter socket [p. 33] 3 Battery mounting surface [p.
Operation References On-screen Display Index For details on the use of each function, refer to the page number indicated. TAPE-CAMERA mode p. 34 p. 22 pp. 20, 44 p. 20 p. 22 AU T O 3 0 min S E T T I NG 1 P I C. E F F E C T S C E N E ME NU QK . R E T U RN GU I D E R E T U RN S E T T I NG 1 P I C. E F F E C T S C E N E ME NU QK . R E T U RN GU I D E R E T U RN p. 45 p. 46 p. 32 p. 27 S E T T I NG 2 D G T L Z OOM T APE SPE ED DIS 16 : 9 A UD I O MOD E R E T U RN p. 28 p. 36 p. 34 p. 34 p.
Operation References Operation References CARD-CAMERA mode p. 55 p. 22 CARD 10 / 80 NORMAL p. 55 p. 44 S E T T I NG 1 P I C. E F F E C T S C E N E ME NU S E L F T I ME R GU I D E R E T U RN p. 45 p. 46 p. 57 p. 27 S E T T I NG 2 D G T L Z OOM DIS R E C MOD E R E T U RN p. 28 p. 34 p. 56 OTHE RS F ORMA T BEEP D E MO MOD E L A NGU A G E R E T U RN p. 58 p. 69 p. 79 p. 15 P L AY BACK SE T P I C. E F F E C T S L I D E S HOW DE L E T E P RO T E C T P R I . O RD E R R E T U RN p. 41 p. 67 pp.
Each time you press the MANUAL button, the screen changes as shown below. AUTO MAN . F O C U S AUTO E X POSURE Focus setting screen (p. 42) AUTO Exposure setting screen (p. 43) AUTO MANUAL button AUTO WH I T E B A L . Operation References Manual screens White balance screen (p. 44) AUTO Normal screen AU T O 3 0 min On-screen indicators on/off Each time you press the MENU button, the screen changes as shown below. • The example screens shown are for TAPE-CAMERA mode.
Operation References Operation References Warning Indicators If a warning indicator appears on the screen, follow the specified instructions. Displayed for the first 3 seconds Displayed after 3 seconds I NSER T A CASS E T TE. Description of warning There is no video cassette in the camcorder. Insert a cassette (see page 12). E J E C T T HE CAS SE T T E . E J E C T THE CAS SE T T E . The video cassette is defective and should be removed (see page 12). CASSE T T E NOT RE CORDA BL E. P RO T E C T .
Description of warning NO MEMORY CARD The card is not inserted or is inserted improperly. Check that it is properly inserted (see page 13). MEMORY CARD FUL L The capacity of the card is full and cannot store any more images. Delete unnecessary images (see page 61) or replace the card with a new one (see page 13). NO DA T A ON MEMORY C ARD The card has no images recorded in the format the camcorder can recognize.
Preparation Preparation Attaching and Removing the Battery Pack Attaching Preparation Power switch 9 1 Make sure that the Power switch is set to OFF. 2 Align the = mark on the side of the battery pack with the = mark on the camcorder (1), and slide the battery pack in the direction of the arrow completely until it locks into place (2). Removing 1 Make sure that the Power switch is set to OFF. 2 Rotate the monitor section of the camcorder (1), then press the battery release (2).
Charging the Battery Pack Attach the battery pack on the camcorder, and make sure that the Power switch is set to OFF. 2 Plug the AC adapter into a power outlet (1), then insert the DC plug into the DC input jack (2). • The charge indicator lights up. DC input jack To power outlet Preparation 1 Notes: • Charge the battery pack between 50°F and 86°F (10°C and 30°C). The battery pack may not charge properly at temperatures too low or too high. • The battery pack and charger become warm during charging.
Preparation Powering the Camcorder from an AC Outlet Preparation You can also power the camcorder from a power outlet by using the supplied AC adapter. Caution: • The supplied AC adapter is specially designed for use with this camcorder, and should not be used as a power supply for other camcorders. 1 Make sure that the Power switch is set to OFF. 2 Plug the AC adapter into a power outlet (1), then insert the DC plug into the DC input jack (2). • The camcorder is supplied power.
Inserting and Removing a Cassette Inserting 1 4 Wait for the cassette holder to fully retract. Close the compartment door by pressing the center until it clicks into place. Preparation Attach the power source to the camcorder, then slide the cassette compartment door release and open the cassette compartment door. • After confirmation sound, the cassette holder extends and opens automatically. Cassette compartment door release Removing Perform step 1 above, then take out the cassette.
Preparation Inserting and Removing a Card Preparation You can use an SD Memory Card or a MultiMediaCard for storing still images. Removing Perform steps 1 and 2 above, push the card (1) and pull the card straight out (2) as shown below. Inserting 1 Make sure that the Power switch is set to OFF. 2 Slide the card slot cover release and open the card slot cover in the direction of the arrow. Card slot cover release Notes: • You can use only the SD Memory Card or the MultiMediaCard (see page 71).
Installing the Lithium Battery Installing Removing Perform steps 1 and 2 above, then lift out the battery from the battery holder. 1 Slide the cassette compartment door release and open the cassette compartment door. Note: • The cassette holder will extend and open when the camcorder is connected to a power source. Be sure to close the cassette holder before proceeding to the next step (see page 12). 2 Pull out the lithium battery holder using a pointed object such as the tip of a ballpoint pen.
Preparation Preparation Selecting the Language for the On-screen Display Changing 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MENU button until the menu screen appears. Available modes: TAPE-CAMERA, CARD-CAMERA 2 Press l or m on the operation button to select I, then press the SET button. This camcorder allows you to choose English, French or Spanish as the on-screen display language. 3 Press l or m to select “LANGUAGE” (“LANGUE” or “IDIOMA”), then press the SET button.
Setting the Date and Time 4 Press l or m to select “JUN” (month), then press the SET button. SE T T I NG Available modes: TAPE-CAMERA, CARD-CAMERA 5 Press l or m to select “2” (day), then press the SET button. SE T T I NG Power switch 6 SET button 7 Operation button Note: • Before performing the steps below, make sure that the lithium battery has been installed (see page 14). 1 Press the MENU button until the menu screen appears.
Preparation Changing to the 24-hour Time Mode Preparation 1 After performing step 8 above, press l or m to select “12H/24H”, then press the SET button. CLOCK SE T D I SPLAY S E T T I NG 12H / 24H R E T UR N 2 Attach the wrist strap to the wrist strap loop as shown below. Wrist strap loop 1 2H 2 4H Press l or m to select “24H”, then press the SET button. 1 2 H 2 4H 3 Attaching the Wrist Strap 2 4H Press the MENU button to turn off the menu screen.
Always attach the lens cap over the lens when not using the camcorder. Tips on Recording Positions To create images that are easy to watch during playback, try to record with an upright posture and steady hand to prevent a shaky image. Place your right thumb close to the REC START/STOP button and Power Zoom control. Place your left thumb on the thumb rest on the left side of the screen.
Basic Operations Basic Operations Playback Recording Camera Selecting the Camcorder Mode Power switch This camcorder includes functions for use as both a video camera for recording and playing back images on tapes and as a digital still camera for recording and playing back still images on cards. One of the following camcorder modes needs to be set before starting any operation.
Easy Camera Recording on Tape in Full Auto Mode To pause recording Press the REC START/STOP button again. Recording pauses, and the camcorder enters Recording Standby mode. Available mode: TAPE-CAMERA PAUSE • Before you start recording, perform the operations described on pages 9 through 18 to prepare your camcorder for recording. REC START/STOP button Power switch Set the Power switch to OFF without pressing the Lock button. Media Selection switch 1 2 Remove the lens cap.
Basic Operations Camera Recording Zooming Auto Focus Available modes: TAPE-CAMERA, CARD-CAMERA Available modes: TAPE-CAMERA, CARD-CAMERA Zooming allows you to move visually closer to or farther from a subject without physically changing your position. When using the optical zoom, you can enlarge the subject up to 10K. The camcorder is preset to Auto Focus mode, which is designed to focus on most types of subjects.
Remaining Recording Time Display Remaining Battery Power Display Available mode: TAPE-CAMERA Available modes: All modes When the camcorder is recording in TAPECAMERA mode, an on-screen indicator displays the approximate remaining tape time in minutes. When using the camcorder with the battery pack as the power source, the remaining battery power indicator is displayed. If the battery power becomes very low, a warning indicator appears. Replace the battery pack.
Basic Operations Basic Operations Camera Recording Playback Tape Playback To stop playback Press l. Available mode: TAPE-VCR The LCD monitor screen functions as a handy playback monitor. Nothing needs to be connected, allowing instant on-screen playback with the sound through the built-in speaker. Media Selection switch Power switch To turn the power off Set the Power switch to OFF without pressing the Lock button.
Video Search Still Available mode: TAPE-VCR Available mode: TAPE-VCR The video search function makes it easy to search for a desired scene on the tape. The still function allows you to pause playback in TAPE-VCR mode. Searching for a Scene Near the Current Tape Position During playback in TAPE-VCR mode, press m on the Operation button. 1 During playback in TAPE-VCR mode, press k (or j) on the Operation button. To return to normal playback, press m again.
Basic Operations Playback Watching Playback on a TV Caution: • Check that the camcorder, TV, VCR and other equipment to be used are turned off before making any connections. Picture noise or malfunction may occur if any of the above is left on while making a connection. Available modes: TAPE-VCR, CARD-VCR You can connect the camcorder to a TV to allow a larger audience to enjoy playback. Open the jack cover on the camcorder (see page 2).
Useful Features 3 Using the Menu Screens Press l or m on the Operation button to select the desired menu screen (Y), then press the SET button. Example Use the menu screens to adjust the various camcorder settings. S E T T I NG 2 D G T L Z OOM O F F T APE SPE ED DIS 16 : 9 A UD I O MOD E R E T U RN Media Selection switch Power switch • You can press k, instead of the SET button. 4 SET button MENU button Press l or m to select the desired menu item (DGTL ZOOM), then press the SET button.
Useful Features Useful features Camera Recording Camera Recording Displaying the Recording Guide Available modes: TAPE-CAMERA, CARD-CAMERA This function helps you decide on the size of the subject occupying the screen. Select one of five recording guides. Turning on the recording guide • The example screens shown are for TAPECAMERA mode. 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MENU button until the menu screen appears.
Setting the Digital Zoom The “D” digital zoom indicator is displayed during digital zooming. Available modes: TAPE-CAMERA, CARD-CAMERA You can select three different zoom ranges: 1– 10K (optical zoom), 10–40K (digital zoom) or 10–300K (digital zoom). The digital zoom allows you to record powerful close-up pictures with the same operation as normal zooming. Notes: • The digital zoom is in addition to the optical zoom giving a combined maximum zoom range of 1–300K.
Useful features Camera Recording Gamma Brightness Compensation To obtain a brighter picture Press the GAMMA/BRIGHTER button again. • The x indicator appears. Available modes: TAPE-CAMERA, CARD-CAMERA GAMMA When the subject is backlit, the image will appear dark if it is recorded normally. The gamma brightness compensation function improves the picture by increasing the brightness of the subject while leaving the brighter portion of the image unaffected.
Gain-up To obtain a brighter picture Press the GAMMA/BRIGHTER button again. • The e indicator appears. Available modes: TAPE-CAMERA, CARD-CAMERA When you are recording in a dark or poorly illuminated location, “LIGHT” is displayed on the screen. Use the gain-up function to record a brighter picture. Note: • At locations where lighting is adequate, “LIGHT” will not appear. The gain-up function cannot be used in this case.
Useful Features Camera Recording 2 Fade In and Fade Out Press the REC START/STOP button to begin recording. • The picture turns white, and the image and sound fade in. Available mode: TAPE-CAMERA The fade function allows you to gradually bring the image and sound in or out at the beginning or end of a scene for creating scene transitions. This is especially effective in creating a dramatic change in scenery.
Quick Return Edit Search Available mode: TAPE-CAMERA Available mode: TAPE-CAMERA If while playing back your tape you want to quickly return to the last recorded scene and start recording again, use the quick return function. The edit search function lets you search, without switching from TAPE-CAMERA mode to TAPE-VCR mode, for the point on the tape where you wish to start recording next. 1 Set the camcorder to TAPE-CAMERA mode.
Useful Features Camera Recording Still Recording on Tape Available mode: TAPE-CAMERA You can record continuous still images of subjects. 1 Set the camcorder to TAPE-CAMERA mode. 2 In Recording Standby mode, press the STILL button fully. Attaching the Supplied Tripod Adapter Attach the supplied tripod adapter when using a tripod with the camcorder. 1 Align the tripod adapter with the tripod adapter socket on the bottom of the camcorder, then rotate as shown below.
Wide Screen (16:9) Available mode: TAPE-CAMERA The wide screen function lets you record scenes with the wide-screen feel of a movie shown in a theater. The top and bottom of the picture are masked with black bands to produce an effective screen aspect ratio of 16:9. Normal screen Wide screen In TAPE-CAMERA mode, press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select Y, then press the SET button. 3 Press l or m to select “16:9”, then press the SET button.
Useful Features Camera Recording Self Recording Available modes: TAPE-CAMERA, CARD-CAMERA Rotate the LCD monitor 180° vertically so that the screen faces the other way and the subject can monitor the shot while you are recording. Cautions: • Do not rotate the monitor section to the self recording position during recording or playback. • For recording in Self Recording mode, be sure to rotate the monitor section, NOT the lens section.
Recording in LP (Long Play Recording) Mode Available mode: TAPE-CAMERA This camcorder allows you to record in LP (Long Play Recording) mode for approximately 50% more recording time with the same picture quality as that in SP (Standard Play Recording) mode. 1 In TAPE-CAMERA mode, press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select Y, then press the SET button. 3 Press l or m to select “TAPE SPEED”, then press the SET button.
Useful Features Camera Recording Selecting the 16-bit Audio Recording Mode Available mode: TAPE-CAMERA The camcorder normally records audio in the 12-bit audio recording mode. For higher-quality audio recording, select the 16-bit audio recording mode. 1 In TAPE-CAMERA mode, press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select Y, then press the SET button. 3 Press l or m to select “AUDIO MODE”, then press the SET button.
Useful Features Playback Using the Remote Control Available modes: TAPE-CAMERA, TAPE-VCR Installing the Batteries Press l or m to select “ON”, then press the SET button. ON REMOT E 5 Use the remote control to operate the camcorder from a distance, such as when you want to record yourself in a scene, or when the camcorder is connected to a TV for use as a VCR. Press the MENU button to turn off the menu screen.
Useful Features Playback Displaying the Date and Time of Recording Available modes: All modes Follow the procedure below to display the date, or both the date and time, of recording on the screen. You can display the date and time during both recording and playback. Useful Features • The example screens shown are for TAPECAMERA mode. Slow 1 Hold down the Lock button and set the Power switch to CAMERA or VCR. Available mode: TAPE-VCR 2 Press the MENU button until the menu screen appears.
Gamma Playback Copying an Image from Tape to Card Available mode: TAPE-VCR The gamma playback function improves the playback picture in TAPE-VCR mode by increasing the brightness of the subject while leaving the brighter portions of the image unaffected. Available mode: TAPE-VCR You can capture your favorite image frame from a video tape recording and save it on card. 1 Insert the recorded Mini DV cassette and a card in the camcorder. 2 Set the camcorder to TAPE-VCR mode, then begin tape playback.
Useful Features Playback Picture Effect Playback 4 Available modes: TAPE-VCR, CARD-VCR Press l or m to select the desired picture effect, then press the SET button. P I C. E F F E C T B W These picture effects let you play back images with a more dramatic effect. 5 Press the MENU button to turn off the menu screen. Useful Features Types B/W: The picture is displayed in black-andwhite. SEPIA: The picture is displayed in sepia color similar to that of an old photograph.
Advanced Features Camera Recording Manual Focus 1 Available modes: TAPE-CAMERA, CARD-CAMERA Auto Focus may not be able to focus on the subject in the situations shown below. In such situations, set the camcorder to Manual Focus mode and focus manually. Subject is too dark. In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the focus setting screen appears. AUTO MAN . F O C U S 2 Adjust the Power Zoom control to frame the subject as you desire. 3 Press m or l to focus on the subject.
Advanced Features Camera Recording Manual Exposure Available modes: TAPE-CAMERA, CARD-CAMERA The camcorder is preset to Auto Exposure mode, which automatically selects the optimal aperture. However, when there is too much contrast in brightness between the subject and background, you may not be able to record a clear image. In this case, use the manual exposure function to correct the exposure level. Background is too bright and subject too dark (backlit subject).
White Balance Lock Available modes: TAPE-CAMERA, CARD-CAMERA The color of the subject on the screen looks different depending on lighting conditions. Lock the White Balance if the Auto White Balance does not work properly. 1 In TAPE-CAMERA or CARD-CAMERA mode, press the MANUAL button until the white balance setting screen appears. AUTO WH I T E B A L . 2 AUTO To return to Auto White Balance mode Press the SET button while the white balance setting screen is displayed.
Advanced Features Camera Recording Digital Picture Effects 4 Available modes: TAPE-CAMERA, CARD-CAMERA • The selected digital picture effect displays on the menu screen. These digital picture effects let you record the subject with a more dramatic effect. Advanced Features B/W: To record in black-and-white. SEPIA: To record in sepia color similar to that of an old photograph. SOLARI: To record with enhanced contrast, creating a unique artistic image.
4 Scene Menu (Program AE) Press l or m to select the scene setting that best fits the recording situation, then press the SET button. • The selected scene setting displays on the menu screen. Available modes: TAPE-CAMERA, CARD-CAMERA You can set the camcorder to the shooting mode that will create the best results for a specific situation. Just select one of four scene settings shown below.
Advanced Advanced FeaturesFeatures Playback Playback Using the Time Code 5 • The time code appears when the onscreen indicators are turned on. Available modes: TAPE-VCR, TAPE-CAMERA The time code shows the hour, minute and second of recording, and the frame number (1 frame = approx. 1/30 sec.). This is automatically recorded along with the subject when you are recording on the tape. You can display the time code on the screen as an accurate counter in both TAPE-VCR and TAPE-CAMERA modes.
Editing Cutting Unwanted Sequences 1 Video editing lets you refine your videos by removing unwanted sequences from your tape, or transposing one sequence with another. This camcorder lets you monitor the source program on the built-in LCD monitor without having to connect it to an external TV or video monitor. Play back the tape to be edited on the camcorder, and locate the beginning and end of the sequence you wish to cut.
Advanced Features Playback Recording from an External Source Available mode: TAPE-VCR You can use this camcorder to record or edit videos from another source, such as a VCR, TV, or video disc player. Connect the camcorder to the source equipment with the supplied audio/video cable, as shown. To Record from an External Source 1 Set the camcorder to TAPE-VCR mode, and insert a Mini DV cassette. 2 Begin playback on the video equipment connected to the camcorder.
Using the Camcorder as a Converter Available mode: TAPE-VCR You can use this camcorder to convert from analog signal (e.g. video recorded on 8 mm or Hi8 tapes) to digital signal. 1 Set the camcorder to TAPE-VCR mode, and make sure that playback stops. 2 Press the MENU button to display the menu screen. 3 Press l or m on the operation button to select V, then press the SET button. 4 Press l or m to select “ANLGnDGTL”, then press the SET button.
Advanced Features Playback Editing with the DV Terminal (IEEE1394) Available mode: TAPE-VCR This camcorder enables you to perform digital video editing. Connect the camcorder to video equipment with a DV terminal using a commercially available DV cable. A DV cable is able to transfer all dubbing signals including video and audio. To Record from Video Equipment 1 Set the camcorder to TAPE-VCR mode, and insert a Mini DV cassette. 2 Begin playback on the video equipment connected to the camcorder.
Selecting the Audio Playback Mode Available mode: TAPE-VCR 3 Press l or m on the operation button to select V, then press the SET button. 4 Press l or m to select “AUDIO”, then press the SET button. You can select any of the following audio playback modes.
Advanced Features Playback Audio Dubbing Feature Audio Recording In normal recording mode Available mode: TAPE-VCR You can add narration to recordings made with this camcorder, while preserving the original audio and video recordings. Microphone for Audio Dubbing You can use the built-in stereo microphone to record narration. 12-bit audio recording The audio is recorded in stereo on Audio 1.
Audio Dubbing To pause audio dubbing 1 Play back the recorded Mini DV cassette and locate the tape position where you wish to start audio dubbing. Press the SET button. To resume audio dubbing, press the SET button again. 2 3 Press m to pause playback. 4 Press l or m on the operation button to select V, then press the SET button. 5 Press l or m to select “AUDIO DUB”, then press the SET button. Press the MENU button until the menu screen appears. • The audio dubbing screen appears.
Digital Still Features Camera Features Digital Still Camera Card Recording Camera Recording Card Recording Available mode: CARD-CAMERA 5 Adjust the Power Zoom control to frame the subject as you desire. 6 Press the STILL button half-way down to focus on the subject. • The camcorder automatically focuses on the subject. When it is set, you will hear a sound and see T mark, then the camcorder locks the focus.
1 In CARD-CAMERA mode, press the MENU button until the menu screen appears. Available mode: CARD-CAMERA 2 Press l or m on the operation button to select Y, then press the SET button. The picture quality of still images recorded on the card depends on the picture quality setting. Select the appropriate setting to match your recording objectives. 3 Press l or m to select “REC MODE”, then press the SET button.
Digital Still Camera Features Card Recording Recording with the Selftimer Available mode: CARD-CAMERA 4 Press the STILL button fully to set the timer. • The self-timer operating indicator flashes while the timer counts down. Self-timer operating indicator The self-timer function allows you to record images after a time-lag of 10 seconds. This is convenient when you want to record an image of you and your friends together. 1 In CARD-CAMERA mode, press the MENU button until the menu screen appears.
Formatting a Card 4 • To cancel formatting, press l or m to select “NO”, then press the SET button. Available mode: CARD-CAMERA Before using a commercially available card with this camcorder, you must first have it formatted. Also, if any of the following warning indicators displays, you will need to format your card. • “FORMAT MEMORY CARD” • “MEMORY CARD ERROR” • “MEMORY CARD READ ERROR” • “CANNOT STORE DATA” Cautions: • Formatting a card erases all stored images, including delete-protected images.
Digital Still Features Camera Features Digital Still Camera Playback Playback 4 Card Playback Press the SET button. • The selected image displays in fullscreen. Available mode: CARD-VCR Image file name 1 0 0 - 0 0 0 13 You can play back and view still images recorded on a card on the LCD monitor.
5 Delete Protection Press the SET button to set delete protection. • The R indicator appears. Available mode: CARD-VCR Delete protection indicator You can prevent your important images recorded on the card from accidental erasure. 1 2 3 1 In CARD-VCR mode, press the MENU button until the menu screen appears. 4 5 6 2 Press l or m on the operation button to select S, then press the SET button. 3 Press l or m to select “PROTECT”, then press the SET button.
Digital Still Camera Features Playback Deleting Stored Images Available mode: CARD-VCR 6 Press the SET button to set the image. 7 Press l or m to select “YES”, then press the SET button to delete the image. Deleting One Stored Image You can delete unwanted images to free up memory of a card for new images. Note: • Deleted images cannot be restored. Check whether or not you want the images before performing the procedure below.
Deleting All Stored Images 4 You can delete all stored images on a card in one operation. • The DELETE ALL indicator appears. Notes: • Deleted images cannot be restored. Check whether or not you want the images before performing the procedure below. • If you want to keep some images on the card, first delete-protect them (see page 60), and then perform the procedure below. 1 In CARD-VCR mode, press the MENU button until the menu screen appears.
Digital Still Camera Features Playback 5 Print Order Available mode: CARD-VCR Press j, k, l or m to select the image to which you want to assign a print order. The print order function allows you to add print information called DPOF to still images recorded on a card. DPOF (Digital Printing Order Format) defines the print information for the specific images and number of each image on memory cards.
To cancel the print order for an image 1 2 Select the image for canceling out of print order in step 5 above, then press the SET button. Press l to select “0”, then press the SET button. Assigning Print Order to All Images 1 Perform steps 1 to 3 in “Assigning Print Order to an Image”. 2 Press l or m to select “PRI. ALL”, then press the SET button. • The M indicator disappears. 1 2 4 PR I NT N O RMA L PR I NT N O RMA L 3 P 5 3 P L AY BACK SE T P I C.
Digital Still Camera Features Playback Transferring Data on Card to Computer Using the supplied USB cable, you can transfer still images to a computer. System Requirements • In the examples below the CD-ROM drive letter is taken as “R:”. Select the correct drive letter according to your operating environment. Windows 98/98 SE 1 “Add New Hardware Wizard” appears after performing “Preparation”. 2 Insert the CD-ROM containing the USB driver into the CD-ROM drive, then click “Next”.
Windows ME 1 “Add New Hardware Wizard” appears after performing “Preparation”. 2 Select “Automatic search for a better driver”. 3 Insert the CD-ROM containing the USB driver into the CD-ROM drive, then click “Next”. 4 5 Select “SHARP DVC USB Ver. 1.0” located in the “WINME” folder of the CD-ROM drive, then click “OK” to begin installation. Click “Finish” to complete the installation. Windows XP For installing the USB driver, you need to log in as the system administrator.
Digital Still Camera Features Playback 5 Slide Show Playback • Beginning from the image selected in step 2, the recorded images will display in full-screen one after another in order of recording. Available mode: CARD-VCR You can automatically play back consecutive still images recorded on a card at intervals of 5 seconds. This is useful when confirming the data recorded on a card. 1 2 P L AY BACK SE T P I C. E F F E C T S L I D E S HOW E X E CU T E DE L E T E P RO T E C T P R I .
Appendix Picture/Backlight Adjustments Available modes: All modes If the picture is difficult to see due to ambient light or other factors, adjust the monitor picture settings. Adjusting the Backlight 1 Press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select O, then press the SET button. 3 Press l or m to select “BACKLIGHT”, then press the SET button. • The example screens shown are for TAPECAMERA mode.
Appendix Turning off the Confirmation Sound Available modes: All modes A confirmation sound is made when you turn on or off the Power switch, press the REC START/STOP button, or perform other designated operations. Use the procedure below to turn off the confirmation sounds. 1 Press the MENU button until the menu screen appears. 2 Press l or m on the operation button to select I, then press the SET button. 3 Press l or m to select “BEEP”, then press the SET button.
Useful Information Hints for Better Shooting • Position the subject in the center of the scene. When using auto focus, whatever is in the center of the scene is kept in focus. Lighting For clear, good-quality recording, 500 to 100,000 lux is needed. Recording is possible with less light, but the picture quality may suffer. Adequate lighting is also essential for correct white balance. Brightness (Lux) Situation (Lux) Blue sky • Avoid backlit subjects.
Appendix DV Technology Digital video (DV) is a revolutionary technology that enables recording and playback of high quality images with the use of special digital features previously unavailable with conventional analog formats. DV and conventional video cassette tapes There are two kinds of DV-format video cassette tapes: the Mini DV cassette and the larger DV cassette used for extended playback and recording. This camcorder only operates with Mini DV cassettes. DV cassettes cannot be used.
Mini DV Cassette To protect recordings against accidental erasure Slide the protect tab on the rear of the Mini DV cassette to the “SAVE” position. Erasure protect tab Precautions when using a Mini DV cassette To record over a previously recorded tape, slide the protect tab to the “REC” position.
Appendix MultiMediaCard Improper handling of the MultiMediaCard may cause damage to the card or images on the card. Follow the instructions below for correct use. Label • Do not peel off the label or paste any paper, tape, or other material over it. Contacts • This is the part of the card that makes contact with other equipment. Do not touch with your fingers, scratch, smudge or damage in any way. Precautions on handling MultiMediaCards • Be sure to insert the card in the correct direction.
SD Memory Card Precautions on handling SD Memory Cards • After removing the card from the camcorder, be sure to immediately store it in the card case. • Do not disassemble or modify the card. • Do not strike, bend, drop, or allow the card to become wet. • Do not touch the metal terminals with your hands or metallic objects. • Do not peel off the label from the card. • Do not attach other labels or stickers to the card.
Appendix Battery Pack This camcorder uses a lithium-ion type battery pack. Charging • Charge the battery pack immediately (or a day) before use. The battery pack gradually self-discharges even if stored in a fully charged state. • Charge the battery pack between 50°F and 86°F (10°C and 30°C). • Fully charge the battery pack. Use of an insufficiently charged battery pack will shorten actual time of use. • Refresh (discharging before charging) is unnecessary.
Dew Formation • What is “dew formation”? When cold water is poured into a glass, dew drops form on the glass. This clinging of water drops is called dew formation. • When dew forms in your camcorder. Dew will gradually form on the head drum of your camcorder and make the video tape stick to the head. This causes damage both to the head and the tape. When dew forms, recording and playback may not function properly.
Appendix Dirty Video Heads When the video heads have become clogged with dirt (dust and tape coating particles), Striped noise Mosaic noise • mosaic-like noise appears on the playback picture. (see above illustration) • playback pictures do not move. • during playback, the whole screen becomes blue.
Cleaning • Many plastic parts are used in the camcorder casing. Do not use thinner, benzene or other strong chemical cleaners. These may cause discoloration and damage to the casing. • Clean the casing with a soft, dry cloth. If the casing is particularly dirty, wipe the casing with a tightly wrung cloth dampened with a diluted, neutral detergent. Then wipe it again with a soft, dry cloth. • Use a soft cloth to wipe finger marks and other smudges off the LCD screen.
Appendix Demonstration Mode Available modes: TAPE-CAMERA, CARD-CAMERA You can watch a brief demonstration of the special camcorder features in Demo mode. If the demonstration appears on the screen when you turn on the camcorder for the first time, cancel the Demo mode to use your camcorder. Canceling Demo Mode 1 During the demonstration, press the MENU button to pause the demonstration. 2 Press l or m on the operation button to select I, then press the SET button.
Before Requesting Service Before calling for service, please check the following troubleshooting table. Symptom Power No power. REC START/STOP button does not work. Possible cause Suggested solution Power source is not properly connected. Connect power source properly (pp. 9, 11). Battery pack is not charged. Charge battery pack sufficiently (p. 10). Dew in camcorder. Wait until dew dries (p. 76). Safety function is in effect. Set Power switch to OFF and remove battery pack.
Appendix CARD mode VCR mode Symptom Suggested solution Rewind or fast forward tape to desired point (p. 23). Video noise in image. Dirty video heads. Call for service (p. 82) or use a commercially available cleaning tape (p. 77). Old or worn tape. Use a new cassette. Image is delete-protected. Cancel the protection setting (p. 60). Cannot delete image on card. Cannot format card. Cassette will not eject. —— Contact your dealer for advise. Power source is not properly connected.
Specifications Camcorder Signal System: Recording System: Cassette: Recording/Playback Time: Tape Speed: Pickup Device: Lens: Lens Filter Diameter: Monitor: Microphone: Color Temperature Compensation: Minimum Illumination: Still Image Compression System: Still Image Recording Format: Still Image Recording Medium: Power Requirement: Power Consumption: Operating Temperature: Operating Humidity: Storage Temperature: Dimensions (approx.): Weight (approx.
Guía de operación rápida en español Información importante para los consumidores de los EE.UU. ADVERTENCIA: PARA REDUCIR EL RIESGO DE CAUSAR UN INCENDIO O RECIBIR UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA LLUVIA NI A LA HUMEDAD. PRECAUCION: PRECAUCION RIESGO DE SACUDIDA ELÉCTRICA. NO ABRIR. PARA REDUCIR EL RIESGO DE RECIBIR UNA DESCARGA ELÉCTRICA NO RETIRE LA TAPA. EN EL INTERIOR NO HAY PARTES QUE DEBA REPARAR EL USUARIO. SOLICITE LAS REPARACIONES AL PERSONAL DE SERVICIO CUALIFICADO.
Precauciones • Cuando no utilice la videocámara, no se olvide de extraer el videocasete, desconectar la alimentación y desenchufar la videocámara de la fuente de alimentación. • Respete siempre las prohibiciones o restricciones relacionadas con la utilización de equipos electrónicos en vuelos comerciales o en otras áreas susceptibles. • No dirija el objetivo hacia el sol.
AVISOS DE SEGURIDAD IMPORTANTES 85 1. Lectura de las instrucciones—Antes de utilizar este producto deberán leerse todas las instrucciones de seguridad y manejo. 2. Conservación de las instrucciones—Las instrucciones de seguridad y manejo deberán guardarse para poder consultarlas en futuro en caso de ser necesario. 3. Cumplimiento de las advertencias— Deberán cumplirse todas las advertencias del producto y de las instrucciones de manejo. 4.
15. Líneas de alimentación—Una antena exterior no deberá colocarse cerca de líneas de alimentación elevadas ni tampoco cerca de luces eléctricas o circuitos de alimentación, ni donde pueda caer encima de tales líneas de alimentación o circuitos. Cuando instale un sistema de antena exterior deberá tener mucho cuidado para que éste no toque tales líneas de alimentación o circuitos porque el contacto con ellos podría causar un accidente mortal. 16.
Guía de operación rápida Colocación de la batería Interruptor de alimentación Carga de la batería 1 Coloque la batería en la videocámara y asegúrese de que el interruptor de alimentación esté en OFF. 2 Enchufe el adaptador de CA en una toma de corriente (1), y luego inserte la clavija de CC en la toma de entrada de CC (2). • El indicador de carga se enciende. Toma de entrada de CC 1 Asegúrese de que el interruptor de alimentación esté en OFF.
Inserción de un casete 1 Coloque la fuente de alimentación en la videocámara, y luego deslice el control de abertura de la puerta del compartimento del videocasete y abra la puerta del compartimento del videocasete. • Después del sonido de confirmación, el portavideocasete se extenderá y abrirá automáticamente. Control de abertura de la puerta del compartimiento del casete Inserción de una tarjeta Para almacenar imágenes fijas podrá utilizar una tarjeta de memoria SD o una tarjeta MultiMediaCard.
Guía de operación rápida Botón REC START/STOP Control de zoom motorizado/ control de volumen Botón STILL Empleo del zoon Pulse el control del zoom motorizado hacia el lado de la T (1) (telefoto) o el lado de la W (2) (granangular). Control del zoom motorizado Botón SET Botón de operación Conmutador selector de medio Reproducción de cinta Interruptor de alimentación Grabación fácil con la videocámara en una cinta 1 Inserte un casete en la videocámara. 2 Ponga el conmutador selector de medio en TAPE.
Grabación con tarjeta Reproducción de tarjeta 1 2 Inserte una tarjeta en la videocámara. 3 Mantenga pulsado el botón de bloqueo y ponga el interruptor de alimentación en CAMERA. Ponga el conmutador selector de medio en CARD. 1 Ponga el conmutador selector de medio en CARD. 2 Mantenga pulsado el botón de bloqueo y ponga el interruptor de alimentación en VCR. • Las imágenes grabadas en la tarjeta se visualizan en el formato de imagen miniatura.
Visualizaciones en pantalla en español Cuando se selecciona “ESPAÑOL” como idioma de la visualización en pantalla aparecen las siguientes visualizaciones indicadas a continuación. Modo TAPE-CAMERA A J US T E 1 E F . I MAG E N ME NÚ E S C E. R E T OR . R Á P . GU Í A R E T OR NO AU T OM. 3 0m A J US T E 1 E F . I MAG E N ME N Ú E S C E. RE T OR . R Á P . GU Í A R E T OR NO A J US T E 2 Z OOM D I G I . VE L. C I NTA E S T .
Modo CARD-CAMERA TARJ 10 / 80 NORMAL AU T OM. AJ USTE 1 E F . I MAG E N ME N Ú E S C E. AUTODI SPA. GU Í A R E T ORNO AJ USTE 2 Z O OM D I G I . E S T . I MA G E N M ODO GRA BA R E T OR NO AJ USTE 1 E F . I MAG E N ME N Ú E S C E. A U T O D I S P A. GU Í A R E T ORNO AJUST E LCD L U Z F O N DO B R I L L O LC D C O L O R L CD R E T OR NO AJUST E RELOJ M OS T RA R AJUSTE 12H / 24H R E T OR NO O T R OS F ORMA T O P I T I DO M ODO D E MO . I D I OMA R E T OR NO Modo CARD-VCR 7 8 9 10 R E P R OD U C .
Affichages sur écran en français Les affichages sur écran suivants apparaissent lorsque “FRANÇAIS” est sélectionné pour la langue de l’affichage. Mode TAPE-CAMERA REG L. 1 M E N U I MAG E M E N U S C EN E R E T . R AP I D E GU I D E RE T OUR AU T O 3 0 min REG L. 1 M E N U I MAG E M E N U S C EN E R E T . R AP I D E GU I D E RE T OUR REG L. 2 Z OOM N UM. V I T. B A NDE DI S 16 : 9 M O D E A UD I O RE T OUR R E GL . L C D R E T RO E C L A I L UM I N. LCD C O U L E U R LCD RE T OUR R E G L .
Mode CARD-CAMERA CARTE 10 / 80 NORMAL AU T O RE GL. 1 M E N U I MAG E M E N U SC ENE R E T A RDA T . GU I DE R E T OUR RE GL. 2 Z O OM N UM. DIS MO D E E N R E G RE T OUR RE GL. 1 M E N U I MAG E M E N U S C EN E R E T A RDA T . GU I DE R E T OUR R E GL . L C D R E T RO E C L A I L UM I N. LC D C O U L E U R LC D RE T OUR R E G L .
Note
Valid for warranty service in the U.S.