User manual

General Description
BioRobot EZ1 DSP Workstation User Manual 02/2007 3-3
Keypad
The following keys of the control panel are available to the
user.
Key Description
0–9 Selects a menu.
START Initiates an action or starts a protocol.
STOP Interrupts a protocol run.
ESC Displays the previous menu or text.
The other keys of the control panel are for service personnel
only.
Liquid-crystal display
The LCD consists of 4 lines. There are 20 spaces per line.
Liquid-Crystal Display
3.1.3 EZ1 Card slot
The EZ1 Card slot accepts an EZ1 Card. Each EZ1 Card
contains one or more protocols that allow the BioRobot EZ1
DSP to perform nucleic acid isolation.
Note: The workstation should only be switched on after an
EZ1 Card is inserted. Make sure that the EZ1 Card is
completely inserted! Otherwise essential instrument data