User manual

General Description
3-4 BioRobot EZ1 DSP Workstation User Manual 02/2007
could be lost, leading to a memory error. EZ1 Cards should
not be exchanged while the workstation is switched on. Do
not remove the EZ1 Card while the machine is switched on.
Also, take care not to expose the EZ1 Card to electric shock,
water, or dirt.
EZ1 Card Completely Inserted into EZ1 Card Slot
3.1.4 Status LEDs
There are 2 light-emitting diodes (LEDs) at the front of the
BioRobot EZ1 DSP:
 Green LED — indicates that the instrument is receiving
power
 Red LED — indicates that an error has occurred