User manual

General Operation
5-2 BioRobot EZ1 DSP Workstation User Manual 02/2007
5.2 Inserting and removing the EZ1 Card
CAUTION
Damage to the instrument [C3]
Ensure that the BioRobot EZ1 DSP is switched off before
you insert or remove the EZ1 Card. Otherwise, the card
and/or the instrument may be damaged.
5.2.1 Inserting the EZ1 Card
1. Lift up the cover of the EZ1 Card slot.
2. Insert the EZ1 Card into the EZ1 Card slot.
Orientate the card so that the picture faces to the left and the
triangle symbol is at the bottom.