User manual

General Operation
BioRobot EZ1 DSP Workstation User Manual 02/2007 5-3
Ensure that the card is completely inserted into the slot.
It is extremely important that the EZ1 Card is completely
inserted to avoid memory error and loss of essential
instrument data.
3. Close the cover of the EZ1 Card slot.
4. Switch on the BioRobot EZ1 DSP (Section 5.3.1, page
5-4).
Note: Do not remove the EZ1 Card while the machine is
switched on.
5.2.2 Removing the EZ1 Card
1. Switch off the BioRobot EZ1 DSP (Section 5.3.2, page
5-5).
2. Lift up the cover of the EZ1 Card slot.