User manual

General Operation
5-8 BioRobot EZ1 DSP Workstation User Manual 02/2007
1. Press “STOP”. The protocol run pauses and the LCD
displays the following text.
2. To continue the protocol run, press “START”.
The protocol run continues from where it had stopped.
3. To cancel the protocol run, press “STOP”. The LCD
displays the main menu.
Then follow these steps:
 Ensure that the workstation door is closed
 Press “1” to display “Manual” in the LCD
 Press “2” to return the tips to the tip rack and to
return the motors to their home positions
 When “Manual” reappears in the LCD, press “ESC”
to redisplay the main menu
 Another protocol can now be run
5.6 Setting up the worktable
Note: For specific details about setting up the worktable,
refer to the onscreen instructions, which are also included in
the handbook supplied with the EZ1 DSP Kit you are using.