User manual

General Operation
BioRobot EZ1 DSP Workstation User Manual 02/2007 5-9
5.6.1 Removing and replacing the tray
The tray is located under the worktable and can be removed
for cleaning:
1. Switch off the BioRobot EZ1 DSP.
2. Push the worktable toward the back of the BioRobot EZ1
DSP.
3. Remove the tray using its handle.
Reverse this procedure to replace the tray. To avoid
instrument damage, ensure that the tray is positioned
correctly.
5.6.2 Loading the reagent cartridges
Note: Do not remove the foil from the reagent cartridges.
1. Invert the reagent cartridges several times to mix the
magnetic particles.
2. Tap the reagent cartridges until the reagents are
deposited at the bottom of the wells.
3. Remove the cartridge rack from the worktable.