User manual

Setup Your VorTech Pump

Powering Your EcoSmart Driver

You EcoSmart Driver now has the capability to be turned off without unplugging the power supply

from your driver. When turned on, the option button can be used simultaneously with either the set

or mode buttons to perform certain configurations. To turn on or off your driver, simply just press the

power/option button. If you have a master/slave relationship setup, the power/option button allows

you to power off locally or power off the whole system, including each slave pump. To power off

just one pump, only press the power/option button. To power off the system of master/slave pumps,

press and hold the power/option. Note: If you power off a system of master/slave pumps together,

you can power them all back on by pressing the option/power button on any of the pumps in that

master/slave relationship. This is useful if you have an EcoTech Marine Battery Backup, so that you

can power off your VorTech Pump without having to unplug your driver from the Battery Backup.

Section 3.5