User manual

2
Contents
Chapter 1: Before You Start
Section 1.0: Introduction 3
Section 1.1: Safety Warnings 4
Chapter 2: Your VorTech Propeller Pump
Section 2.0: VorTech MP40w EcoSmart 6
Section 2.1: VorTech MP10 EcoSmart & MP10w EcoSmart 7
Chapter 3: Setup Your VorTech
Section 3.0: Pump Positioning 8
Section 3.1: Spacing VorTech Pump 9
Section 3.2: Attaching VorTech Pump 10
Section 3.3: Aligning VorTech Pump 11
Section 3.4: EcoSmart Driver 12
Section 3.5: Powering Your EcoSmart Driver 13
Section 3.6: Master/Slave/Independent 14
Section 3.7: Assigning Master/Slave Relationship 15
Section 3.8: Assigning Local Max Speed to a Slave 16
Chapter 4: Operational Modes
Section 4.0: Navigating Between Modes 18
Section 4.1: EcoSmart Operational Modes 19
Section 4.2: General Operational Modes 21
Section 4.3: Auto-Tune & Wave Motion Warning 25
Section 4.4: Other Modes 26
Section 4.5: Configuration Mode 28
Chapter 5: Pump Configuration for EcoSmart
Section 5.0: What Does EcoSmart Mean to You? 32
Section 5.1: Use of EcoSmart with Wireless Wave Driver 32
Section 5.2: Horizontal & Vertical Pump Positioning 33
Section 5.3: MP10’s Aren’t Just for Nano Tanks Anymore 33
Section 5.4: Advanced EcoSmart Pump Positioning 34
Chapter 6: Maintenance
Section 6.0: General Maintenance 35
Section 6.1: Disassembling Wet-Side 35
Section 6.2: Wireless Driver Firmware Upgrade 36
Section 6.3: Pump Disconnect Error Protection 38
Chapter 7: Troubleshooting
Section 7.0: Error Codes 39
Section 7.1: FAQS 40
Chapter 8: Appendix
Section 8.0: Contact Us 41
Section 8.1: Warranty 42
Section 8.2: FCC and CE Warnings 43
Page