User manual

General Operational Modes

Constant Speed Mode

In Constant Speed Mode (indicated by a green LED on

the knob) the pump runs continuously at a constant speed

which can be user-set. When in constant mode, slave

pumps will only sync with the master pump, there is no anti-

sync. When you change speed, the speed of the pump will

be represented by the LED bar. To navigate to the mode,

press the mode button until the control dial turns green. You

can then adjust the speed of the mode using the control

dial. The speed will be indicated by the blue LED light strip.

Illustration to the right shows an EcoSmart driver in Con-

stand Speed Mode with the speed set to just over 50% of

max speed.

Random Modes

Random mode operates in two different settings, Lagoonal and Reefcrest. These random modes

are used to simulate natural reef environments. To navigate to each of these modes, press mode

until the control dial turns yellow. Then press set to switch between Reefcrest Random and La-

goonal Random. The specific Random mode you are in will be indicated by a pair of two blue

LED lights brightly illuminated. The speed of these modes will be indicated by dim LED lights. The

graph below represents a portion of what each mode’s speed for a duration of time.

Operational Modes

Lagoonal

Reef Crest

Section 4.2