User manual

Operational Modes

Feed Mode Time:

Setting 1: 5 minutes

Setting 2: 10 minutes **Default Setting

Setting 3: 15 minutes

Setting 4: 20 minutes

Setting 5: 30 minutes

Setting 6: 60 minutes

Auto-Dim Time:

Setting 1: Auto-Dim after 1 minute of inactivity

Setting 2: Auto-Dim after 10 minutes of inactivity

Setting 3: Auto-Dim after 60 minutes of inactivity

Setting 4: Disabled **Default Setting

Driver shown here in Feed Mode Time Configuration Mode

Setting, showing that it is set to the 5 minutes and default

being 10 minutes.

Driver shown here in Auto-Dim Time Configuration Mode

Setting, showing that it is set to 1 minute and default being

disabled.

Once you have selected the new value for the current setting, press and hold the set button until

the two leds on the led bar indicating the new value flash repeatedly. The value is now saved and

you are back to the configuration main menu with the next setting in progression will illuminate.

To exit configuration mode at any time in this entire process press the option button. Values are

not saved until you press and hold the set button and the value blinks repeatedly, if you press op-

tion to exit before that step, the value will not be saved.

Example:

Section 4.5