User guide

88 Java™
Java™ Settings
Application Volume
You can set the volume of the application such as the
sound effect to one of the five levels or silent. When
“Profiles” (p. 102) is set to “Silent”, the “Application
Volume” setting is overridden.
“Java™”
→ “Java™ Settings” → “Application
Volume”
The current volume level is displayed.
1. Press a (or d) to increase the volume or press b
(or c) to decrease the volume and then press B.
Backlight
“Java™”
→ “Java™ Settings” → “Backlight” →
“Switch On/Off
”
1. Select “Always On”, “Always Off ” or “Normal
Settings”.
“Always On”: Lights while the application is
operated. Blinks when the
blink setting is on.
“Always Off
”: Turns off while the
application is operated even if
a key is pressed. Blinks when
the blink setting is on.
“Normal Settings”: Works with the main
backlight setting (p. 107).
Blinks when the blink setting
is on.
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off
”, the backlight cannot be
turned on from the application.
“Java™”
→ “Java™ Settings” → “Backlight” →
“Blink”
1. Select “On” or “Off ”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or not.
“Java™”
→ “Java™ Settings” → “Vibration”
1. Select “On” or “Off ”.
(M 1-3)