Specifications
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
The unit will be Auto Re-Connection by following operation .
Every time turn the ignition key from off to on, the unit will Auto re-connect with the mobile
phone one.
Dis-Connection of the Bluetooth System
The unit have a option function for user to disconnect the Bluetooth system with the unit. The unit
can be Dis-connected by the following methods.
Access into MENU - DIS-CONN mode to activate the manual Dis-Connection.
Please see MENU Operation for more details of how to access into MENU mode.
Once the “ ” is display on the LCD, press the AUDIO button to activate the
manual Dis-Connect mode.
The LCD Display will displayed “ ” during the Dis-connecting period.
If the Dis-Connection is successful, the LCD Display will display “ ”. And
the unit will switch back to the previous mode automatically.
INCOMING CALL
ANSWERING AN INCOMING CALL
When there is an incoming call, the display will display the Phone Number. If the incoming call
has no the Phone Number, the LCD will display “ ” User can press the
“PHONE” button or “MODE” button to answer / accept the call.
Always press the “PHONE” (AUIDIO)button or “MODE ' button to answer / accept the call
after the LCD display the Phone Number or “PHONE IN”.
The audio output of the present mode will be muted and the ringing tones will be heard, if
an incoming call is not being answered.
User can use the volume up/down to adjust the volume level.
To end the conversation, press the “CLEAR” button. The unit will switch back to the previous
mode automatically and release the mute of the previous mode at the same time.
User can press “CLEAR” button to reject the incoming call.
An incoming call under stand by mode (Ignition on & Power Off) The system will
automatically switch on the head unit.
Rejecting An Incoming Call
The audio output of the present mode will be muted and the ringing tones will be heard if an
incoming call is not being answered. After pressing the “CLEAR”(BAND) button, the mute
of the present mode will be released.
Every time when user long press AUDIO button or short press MODE button confirm dialing a
call, the Unit will Auto Re-connect with the Mobile Phone once ( Only if this Mobile Phone has
been paired with the unit previously ).
38