User`s manual

2 - 3
2
From previous page
Item Specifications (JW-12PS/14PS)
Settable within range -9999999 to +9999999 pulses
8 outputs/axis (output to external relay)
1 input/axis, real-time external input not via PLC (used for interrupt jog feed, etc.)
1 input/axis, real-time external input not via PLC (used for interrupt output)
Set by ladder program on PLC
Set from personal computer (dedicated software required, scheduled to be supported in the near future)
Backed up by internal flash ROM on this module
* Data can be saved to hard disk or other storage media on personal computer by dedicated
software running on personal computer.
(Dedicated software is scheduled to be supported in the near future.)
Software limit
Auxiliary output (M output)
General-purpose input
General-purpose output
Setting method for
operation data
Saving of operation
data
(2) Pulse output specifications
(3) Input specifications
Item
CW, CCW (open collector output) CW, CCW (line driver output)
NPN transistor (sync output)
5/12/24VDC
4.75 to 26.4VDC
Max. 30 mA
1 V or less
0.2 mA or less
8 ms or less
* Time from acceptance of PLC startup signal up to output of pulse
250 kpps 500 kpps
500 VAC (across external input terminal and secondary circuit) *photocoupler insulation
Specifications (JW-12PS/14PS)
Signal names
Output system
Rated output voltage
Output voltage range
Output current
On voltage
OFF leak current
Pulse output start time
Max. output pulse frequency
Breakdown voltage
Differential output
(AM26LS31 or equivalent, RS-422A
compliant)
Driver error, positioning completed, origin
proximity, origin (24 V), upper limit, lower
limit, general-purpose input, emergency stop
Encoder A/B/Z phase input (line driver
output and 5V open collector output
supported)
24VDC (21.4 to 26.4VDC)
5.8mA (24V) <12mA (24V)> *
20 V/5 mA or less (20 V/12 mA or less)*
6 V/1.5 mA or less (6 V/2 mA or less)*
1 ms or less (ON→OFF, OFF→ON)
500 VAC (across external input terminal and secondary circuit) *photocoupler insulation
5VDC (3 to 5.5VDC)
20mA (5V)
3V/ 12 mA or less
1 V/ 2 mA or more
4X, 500 kpps
Signal name
Rated input voltage (range)
Rated input current
Input ON level
Input OFF level
Input response time
Breakdown voltage
* Figures in parentheses "()" are for origin (24 V) only.
Item
Specifications (JW-12PS/14PS)