User`s manual

3 - 1

Chapter 3 Names and Functions of Parts

Displays the point No., axis operating state and other information using

the segment LED (three digits) and indicators (X, Y, CW, CCW, etc.).

Sets the operation mode.

Initial switch

This connector is for connecting to a Windows machine

(OS: Windows 95/98).

• An exclusive cable and communications adapter (JW-100SA) are

used for the connection.

This connector is for the communications with a driver in an absolute

system.

This connector is for connecting to the servo driver for the X-/Y-axes.

•

The module side connector of the connector cable is provided with

this module.

Function

MODE switch

INITIAL switch

Connection for tool

connector (CN1)

Name

Display panel

Connector for X-/Y-axes

(CN2)

This connector is for connecting to the servo driver for the Z-/A-axes.

•

The module side connector of the connector cable is provided with

this module.

Connector for Z-/A-axes

(CN3: JW-14PS only)

For details, →see page 3-4.

JW-12PS

JW-14PS