User`s manual

3 - 3
3
(2) Segment display (3 digits)
The data No., error code, etc. are indicated in each operation mode.
3rd digit 2nd digit 1st digit
Regular
operation
mode
Normal
Error
Position data No, step data No., etc.
Error No., etc.
• FAULT indicator blinks.
During teaching
Position data No., etc.
•
When the position data No. is selected, the segment display does not blink .
The segment display is lit after teaching is executed.
In system maintenance mode System information (version information, etc.)
State Description on segment display
Segment display: 3-digit display (0 to 9, -, P, d, F, J, t, H, h)
The following table shows the main content that is displayed.
The following describes the indication of the 3rd digit.
• Program operation "execution in progress" indication
• Lower two digits are step No.
• Direct operation "execution in progress" indication
• During block data save (transfer to flash ROM)
• Jog operation "execution in progress" indication
• Zero return "execution in progress" indication
Indication of the CW and CCW LEDs is interlocked with the above indications.
• Move origin indication
• Indication during teaching or at end of teaching
• Lower two digits are teaching No. Blinks during
teaching, and is lit at end of teaching.
• During teaching, other indications for that axis are
not output. However, priority is given to other axis if
execution of other axis is started during teaching.