User`s manual

4 - 4
4
[2] Connection of connectors CN2/CN3 for axes
The following shows the model names and signal arrangements of the X-/Y-axis connector CN2 and
Z-/A-axis connector CN3 (JW-14PS only).
(1) Signal assignments of connectors CN2/CN3 for axes
Accessory Manufacturer
Sumitomo 3M Inc.
Sumitomo 3M Inc.
Model
Connector
Shell
10150-3000VE (for 50-pin soldered plug)
10350-52F0-008 (50-pin plastic shell, one-touch lock)
• Applicable cable => AWG#26 to #30
• O.D. of cable used => 16 mm dia. or less
* Connector for axis connection
Connectors (cable side) to connect to the connectors CN2/CN3 for the axes are provided
with this module.
(Notes)
1. Use the soldered type connector provided with this module as the connector for axes must be
shielded.
2. Do not attach or remove the cable side connector from the connector for axes with the 24 VDC
power supply applied to connector CN2/CN3 for axes. Doing so might cause a malfunction.
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CN2(X,Y)
1
3
5
2
4
6
7
26
28
30
27
29
31
32
9
11
8
10
12
13
34
36
33
35
37
38
15
14
16
17
40
39
41
42
18
19
43
44
21
20
22
23
46
45
47
48
24
25
49
50
(50 pins)
(Connector for axis connection)
• Soldered type
: Signal assignments of 10150-3000VE
made by Sumitomo 3M Inc.
• Signal names of CN3 (Z, A)
are same as those for CN2 (X, Y).
*