User`s manual

5 - 6
5
(4) Speed data (No.01 to 64)
Setting range: 0 to 500000 (0 to 500 kpps) in 1-pps increments
Address
7
10
1
10
3
10
5
10
0
10
2
10
4
6543210
Bit
G+0000
G+0001
G+0002
G+0003
• G is the top address of each speed data No.01 to 64.
(5) Position data (No.01 to 99)
Setting range: -9999999 to +9999999 (-9999999 to +9999999 pulses) in 1-pulse increments
"A/I": 0=absolute value, 1=relative value, "Sign": Plus=0, Minus=1
• H is the top address of position data No.01 to 99.
• Position instructions at writing of interrupt output position data becomes an absolute value regardless of
the setting of "A/I", and "A/I" becomes the bit for specifying interrupt output ON/OFF.
(When "A/I" is set to "1", interrupt output is ON, and when "A/I" is set to "0", interrupt output is OFF.)
• Position instructions at speed control startup become the travel distance after an interrupt, and the
"Sign" and "A/I" bits are disabled.
Address
7
10
1
10
3
10
5
10
0
10
2
10
4
10
6
654
A/I Sign
3210
Bit
H+0000
H+0001
H+0002
H+0003