Quick Start Manual

XEA-201 XEA-401 tax programming

4 tax rate settings are available.

There are 99 department keys.

Department keys 1 - 10 are taxable Departments 11 - 99 are non-taxable at default.

Program TAX 1

• Switch register to PGM mode

• Press the #/TM/SBTL key

• Press the number 9

• Press the @for key

• Press the 1 key for tax 1 (2 for tax 2, 3 for tax 3 or 4 for tax 4)

• Press the @for key again

• Put in the tax rate (Use decimal point

– enter exactly as they tell you) EX: 7.25% tax is

enter as 7.25

• Press the @for key again

• Enter the minimum taxable amount (usually $.07- $.11)

• Press the #/TM/SBTL key

• Press the CA/AT/NS key

This programmed the tax rate of 7.25%. If the amount were an example of 6.25% you

would enter the tax rate as 6.25.

The procedure for entering tax 2,3 and 4 are the same with the exception of entering 2

for tax 2, 3 for tax 3 and 4 for tax 4.

This sets the tax for any keys that are defaulted to taxable. If you wish to change the

status of a department key then the department parameters will need to be changed.