XG-PH50X/NL Operation-Manual GB
Table Of Contents
- Introduction
- Quick Start
- Setup
- Connections
- Connections
- Samples of Cables for Connection
- Connecting to a Computer
- Connecting to Video Equipment
- Connecting to Video Equipment That Has an HDMI Output Terminal with a DVI to HDMI Cable
- Connecting to Video Equipment That Has a DVI Output Terminal with a DVI Digital Cable
- Connecting to RGB Video Equipment with a 5 RCA RGB Cable
- Connecting to Video Equipment That Has Component Output Terminals
- Connecting with an S-video Cable or a Composite Video Cable
- Controlling the Projector by a Computer
- Connecting to a Monitor That Has an RGB Input Terminal
- Connecting to an Amplifier or Other Audio Equipment
- Basic Operation
- Turning the Projector On/Off
- Image Projection
- Shifting the Lens
- Using the Adjustment Feet
- Adjusting the Focus
- Adjusting the Projected Image Size
- Correcting Trapezoidal Distortion
- Switching the Input Mode
- Adjusting the Volume
- Turning off the Sound Temporarily
- Displaying an Enlarged Portion of an Image
- Freezing a Moving Image
- Selecting the Picture Mode
- Resize Mode
- Displaying the Black Screen
- Displaying and Setting the Break Timer
- Useful Features
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture” menu)
- Color Management System (“C. M. S.”menu)
- Computer Image Adjustment (“Fine Sync”menu)
- Audio Adjustment (“Audio”menu)
- Using the “Options (1)” Menu
- Displaying Dual Pictures (Pict in Pict)
- Setting the Resize Mode
- Shifting the Projected Image Vertically (Digital Shift)
- Setting On-screen Display
- Setting the Video System
- Capturing Projected Images
- Selecting the Background Image
- Selecting the Startup Image
- Eco Mode
- Detecting the Input Signals Automatically
- Auto Power Off Function
- System Lock Function
- Helpful Functions Set during Installation (“Options (2)” menu)
- Setting a Password
- Checking the Lamp Life Status
- Setting the Lamp Mode
- Reversing/Inverting Projected Images
- Controlling Multiple Projectors with the One Remote Control
- Shortcut to Make Projector Stack Settings
- Locking the Operation Buttons on the Projector
- Bypassing Unused Input Selections
- Selecting the Transmission Speed (RS-232C)
- Monitor Output Settings
- LAN/RS232C Setting
- Service Mode
- Returning to the Default Settings
- Using the Other Menus (“Language”and “Status”menus)
- Appendix
Useful Features
-75
Shifting the Projected Im-
age Vertically (Digital
Shift)
For easier viewing, this function shifts the im-
age projected on the screen up or down elimi-
nating either the upper or lower black band found
in 16:9 and other wide aspect ratios.
Menu operation
Page 56
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of Digital Shift
Note
• The “Digital Shift” function works with the “BOR-
DER”, “STRETCH” or “SMART STRETCH” im-
age. (See page 49.)
Press \
Shifts the projected image
down.
Press |
Shifts the projected image
up.
Setting On-screen Display
This function allows you to turn the on-screen
messages on or off.
Menu operation
Page 58
Example: “Options (1)” screen menu for
INPUT 1 (RGB) mode
Description of OSD Display Settings
Note
• While “Keylock Level” is “Level A” or “Level B”,
pressing
displays “All buttons on Pro-
jector are locked.” despite the “OSD Display”
setting.
Description
All on-screen displays are displayed.
INPUT/VOLUME/MUTE/BLACK SCREEN/
FREEZE/AUTO SYNC/ENLARGE/ “An in-
valid button has been pressed.” are not dis-
played.
All on-screen displays are not displayed. (ex-
cept the menu, H & V LENS SHIFT, KEY-
STONE, FOCUS, ZOOM, “All buttons on
Projector are locked.” and warning displays)
Selectable items
Normal
Level A
Level B