XL-1500W SERVICE MANUAL No. S6242XL1500W/ COMPACT AUDIO SYSTEM MODEL XL-1500W XL-1500W Compact Audio System consisting of XL-1500W (main unit) and CP-XL1500H (speaker system). • In the interests of user-safety the set should be restored to its original condition and only parts identical to those specified should be used. CONTENTS Page SAFETY PRECAUTION FOR SERVICE MANUAL .......................................................................................................... 2 VOLTAGE SELECTION ....
XL-1500W SAFETY PRECAUTION FOR SERVICE MANUAL This product is classified as a CLASS 1 LASER PRODUCT. Precaution to be taken when replacing and servicing the Laser Pickup. The AEL (Accessible Emission Level) of Laser Power Output is less than Class 1 but the laser component is capable of emitting radiation exceeding the limit for Class1. Therefore it is important that the following precautions must be observed during servicing to protect your eyes against exposure to the Laser beam.
XL-1500W FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO THE OPERATION MANUAL.
XL-1500W NAMES OF PARTS ■ Front panel 11 8 1 9 1. CD Compartment 2. CD Open/Close Button 3. On/Stand-by Button 4. Function Selector Button 5. Bass/Treble Selector Button 6. Memory/Set Button 7. Clear Button 8. CD Stop, Tuning Down Button 9. CD Track Up or Fast Forward, Tuner Preset Up Button 10. CD Track Down or Fast Reverse, Tuner Preset Down Button 11. Volume Up and Down Buttons 12. CD Play or Pause, Tuning Up Button 12 10 2 5 6 3 4 1 ■ Display 7 2 4 3 1. Timer Play Indicator 2.
XL-1500W ■ Remote control 1 2 3 4 5 6 7 8 11 12 13 14 15 16 17 18 21 19 22 20 23 24 25 9 10 26 27 1. Remote Control Transmitter 2. On/Stand-by Button 3. CD Button 4. Tuner Button 5. Timer Button 6. Clock Button 7. Memory Button 8. Dimmer Button 9. Surround Button 10. Volume Up and Down Buttons 11. Video/Auxiliary Button 12. Band Selector Button 13. Clear Button 14. Sleep Button 15. Random/Repeat Button 16. CD Open/Close Button 17. Tuner Preset Up Button 18. CD Track Down Button 19.
XL-1500W OPERATION MANUAL Setting the clock 3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. When the 12-hour display is selected, "AM" will change automatically to "PM". 4 This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. 1 Press the CLOCK button and within 3 seconds, press the MEMORY button.
XL-1500W System connections ■ Setting the AC voltage selector ■ Connecting the AC power lead Check the setting of the AC voltage selector located on the rear panel before plugging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area. After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then into the wall socket.
XL-1500W DISASSEMBLY Caution on Disassembly Follow the below-mentioned notes when disassembling the unit and reassembling it, to keep it safe and ensure excellent performance: 1. Take compact disc out of the unit. 2. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit. 3. Take off nylon bands or wire holders where they need to be removed when disassembling the unit.
XL-1500W (E1) x2 ø3 x10mm (G2) x2 ø3 x10mm (G3) x2 Terminal PWB Rear Panel (F1) x1 ø3 x6mm (E2) x1 (G1) x6 ø3 x8mm (H1) x1 (H2) x1 (H3) x4 ø2.5 x10mm (K1) x2 ø2.5 x10mm (D1) x1 ø3 x10mm CD PWB Tuner PWB Main PWB Holder, Indicator Panel,CD (J1) x4 ø2.5 x10mm (D2) x1 LED PWB Holder PWB Chassis CD Mechanism Figure 9-1 , Display PWB (H2) x1 Top Cabinet Gear Box Gear Box Switch PWB Figure 9-2 Pull Pull Hook (N1) x3 (M1) x6 ø2.
XL-1500W REMOVING AND REINSTALLING THE MAIN PARTS How to remove the CD lid (See Fig. 10-1.) Perform steps 1 to 13 of the disassembly method to remove the gear box. (See page 8,9) 1. Remove the screws (A1) x 2 pcs., to remove the CD lid motor. 2. Remove the hooks (A2) x 3 pcs., to remove the worm wheel. Caution: Be careful so that the gear is not damaged. (The damage gear emits noise during searching.) Hook (A2) x3 Worm Wheel (A1) x2 ø2 x3mm CD Lid Motor Figure 10-1 CD MECHANISM SECTION (See Fig. 10-2.
XL-1500W ADJUSTMENT TUNER SECTION fL: Low-range frequency fH: High-range frequency • AM IF/RF Signal generator: 400 Hz, 30%, AM modulated Frequency Frequency Display • FM Mute Level Signal generator: 1 kHz, 40 kHz dev., FM modulated Setting/ Instrument Adjusting Connection Parts T351 *1 AM IF 450 kHz 1,620 kHz AM Band Coverage — 522 kHz (fL): T306 *2 1.1 ± 0.1 V AM Tracking 990 kHz 990 kHz (fL): T302 Frequency 98.
XL-1500W TEST MODE The test mode applied to this microcomputer has three modes, namely the ordinary test mode for adjustment or measurement, the aging test mode, and the self-diagnosis test mode for self-judgment in case of final product inspection. 1. Turning on the test mode For obtaining each test mode, press the ON/STAND-BY button, while keeping pressing the following two buttons in the ordinary stand-by mode (power off ). In this case, the main unit buttons are valid.
XL-1500W 2. Step 2 Mode Press the "CD PLAY" button in this mode to transmit the laser lighting command LDON (8400) and turn on the laser. Any other operations are not performed in this case. Press the following buttons in this state to obtain the operations specified below. "ON/STAND-BY" ..... Test mode and power turned off to shift to the ordinary standby mode. "FF/FWD" ................ The pickup slides toward the outer periphery while this button is pressed. "REW/REV" .............
XL-1500W 5. Step 5 Mode When the CD initialization operation flow is completed, the mute is turned off, and playback is started. Even if playback reaches the outermost periphery of disc, the operation does not stop. The LCD display indicates the playback passage time as in case of ordinary CD playback. Press the following buttons in this state to obtain the operations specified below. "ON/STAND-BY" ...... Test mode and power turned off to shift to the ordinary standby mode. "FF/FWD" .................
XL-1500W 7. Step 7 Mode Press "MEMORY" key during step 6 operation to display automatically adjusted values on LCD in the order as below. Item names are displayed by left alignment, and adjusted values by right alignment in hexadecimal numbers. Operations other than display are as same as those for step 5. a) "Fb" is displayed on the left of LCD. FTBAST command (D480) is transmitted to designate focus balance adjusting register. Then data read by read command SRC2 (2) are displayed in hexadecimal numbers.
XL-1500W 3. Tuner Test Mode (TEST 2) 1. Outline of tuner (radio) test mode The tuner test mode is intended to store the adjustment and measurement frequencies in the preset memory CH. When adjusting the tuner section in the production line, adjusting personnel are not required to set frequency. 2.
XL-1500W 4. Electronic volume Test Mode (TEST 3) When this test mode is obtained, the following display lights for one second. In this mode, volume is -14 dB (STEP28), BASS/TREBLE is set to 0 (0 dB) and SURROUND mode to OFF, and start-up function to CD, respectively. The button operations in the test mode are the same as those of ordinary operation except volume UP/ DOWN. (1) The display is the same as that of ordinary operation except test mode setting.
XL-1500W 7. Button input diagnosis Test Mode (TEST 6) When the test mode is obtained, the following is displayed. This test mode is intended to check whether all the main unit buttons can be detected. Accordingly, in this test mode, it is checked whether the "ON/STAND-BY" button was pressed after all the buttons shown below were pressed. If the result is OK, OK is displayed. If any one of keys was not pressed, an error is displayed.
XL-1500W NOTES ON SCHEMATIC DIAGRAM • Resistor: To differentiate the units of resistors, such symbol as K and M are used: the symbol K means 1000 ohm and the symbol M means 1000 kohm and the resistor without any symbol is ohm-type resistor. Besides, the one with “Fusible” is a fuse type. • Capacitor: To indicate the unit of capacitor, a symbol P is used: this symbol P means micro-micro-farad and the unit of the capacitor without such a symbol is microfarad.
XL-1500W WAVEFORMS OF CD CIRCUIT NO DISC FOCUS SEARCH 1 STOP 12 1 FOO FO+ 13 2 IC803 26pin 3 FO- 14 3 SEL 5 6 1 11 2 TEI 15 3 6 SBAD 11 2 3 TEI 1 TRO 2 IC801 34pin RFO 15 3 FMO 3 IC801 40pin IC802 22pin STOP PLAY REVIEW 6 1 FEI TEI 1 TRO 2 IC801 31pin IC801 29pin RFGO 11 2 IC802 19pin IC801 34pin RFRP 15 3 IC802 17pin 3 FMO IC801 40pin STOP TEI PLAY TCD-782 TNO-02 PLAYBACK 16 1 IC801 31pin TRO SBAD LO 1 RO 2 IC801 53pin 2 IC801 3
XL-1500W TUNER PWB SWITCHING AM Band Tracking fL Q351 FM MUTE LEVEL 7 6 5 4 3 2 FM IF 1 CF301 Q301 4 5 6 7 FM IF AM IF AM IF CF302 T351 CF352 8 R-CH OUT L-CH OUT 9 13 MO/ST 15 14 10 11 12 IF OUT MPX VCO 16 VCC FM DET STEREO SD VSM 3 17 MPX IN 18 AM LOW CUT FM/AM OUT AM RF IN 19 AM IF IN GND FM AFC 20 PHASE (AM/FM) 2 21 PHASE 1 22 CF351 FE301 FM FRONT END FM IF AM OSC OUT IN AM MIX OUT AM OSC IN REG IC303 LA1832S FM IF DET./ FM MPX.
XL-1500W FROM TUNER PWB FROM DISPLAY PWB CNP704 CNP301 10 9 8 7 6 5 4 3 2 1 11 10 9 8 7 6 5 4 3 2 SD FM ST DO CL DI CE D_GND A_12V TUN L A_GND TUN R BUS0 GVSW BUS1 PU_IN BUS2 BUS3 CCE BUCK CD_STB CD_RES CD PWB +B4 +B2 R-CH SO401 VIDEO/AUX INPUT ZD801 Q808 Q809 Q810 ZD802 +B6 L-CH +B4 VOLTAGE REGULATOR 3.3V +B5 7.
XL-1500W FROM DISPLAY PWB +B4 CD +B CNP702 SURROUND 7 8 9 10 11 12 13 D_GND SD DO FM ST DI CL 1 2 3 4 5 6 CE D_GND A_12V TUN L A_GND TUN R 5 4 3 2 1 P_MUTE M PWB MAIN PWB R-CH OUT R-CH IN +B +B2 Q203 5 6 7 8 4 3 2 1 Q201 IC201 KIA4558P SURROUND CONTROL L-CH OUT L-CH IN R-CH OUT AUX R 14 13 12 11 10 8 9 6 7 4 5 3 2 1 VSS 15 DI CE TUN R CD R NC VDD LOGIC 16 19 18 20 21 24 23 22 25 26 27 28 29 30 CL 17 CD L TUN L IC401 LC75342M FUNCTION/VOLU
C384 0.001 G 1 CHASSIS GND 2 3 C349 0.001 C382 F Figure 24 SCHEMATIC DIAGRAM (1/8) – 24 – 4 2.6V 15P 5 IC302 LC72131 PLL(TUNER) R380 1.5K 18 3 4 5 6 7 TUNER PWB-B1 H • NOTES ON SCHEMATIC DIAGRAM can be found on page 19. 6 8 FM DET MPX VCO STEREO 8 270 2.9V R353 5V 5V CF351 FM IF 1K 0V C353 0.022 C354 0.022 0.6V X351 456kHz 2 3V C332 0.022 C366 0.001 C361 0.022 C363 0.022 C367 R350 1/50 2.7K C343 R358 8.2K 33P C362 3.3/50 C364 2.1V (2.7V) 2.1V (2.7V) 5V 2.
PD 7 8 7 9 10 14 13 12 C383 0.022 3.8V (1.2V) C358 12 1/50 L352 100µH R377 5.6K R391 390 L351 100µH 11 R359 1.8K 8 4V (2.2V) 1/50 1.3V C371 C369 56P C368 R356 1/50 1K 1.3V 2.1V X351 456kHz 2.3V (0V) R363 3.3K C373 0.022 R364 3.3K 0.022 470K C374 R357 C366 0.001 5.6K 3 Q351 KRC104 M 1 C396 100/10 C395 0.022 R383 5.6K R384 6.
XL-1500W A CD PWB-A3 CD PICK-UP UNIT (308) B HPC-3LX VCC C801 0.022 +B A_3.3V C823 0.1 A3.3V 1/2V GH6C605B3A1 C4A VR1A TR– TR+ FO– ACTUATOR 1 2 3 4 1.6V 5 0V 6 2.6V 7 0V 8 1.6V 1.6V 9 10 1.6V 11 12 1.6V 1.6V C815 L805 2.2µH 1.6V 0.022 FFC PO+ VREF 1 +5V 2 E 3 C 4 A 5 B 6 C 7 F 8 GND 9 LD 10 VR 11 PD 12 FO+ 13 TR– 14 TR+ 15 FO– 16 CNW801 CNP801 R812 47K 1/2VCC E C A B C F GND LD VR PD FO+ TR– TR+ FO– 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 0.6V F 3.
CD SIGNAL CD_STB R848 1K CD_RES R849 1K CCE R870 10K BUCK R841 10K BUS3 R842 10K BUS2 R843 10K BUS1 R844 10K BUS0 PU_IN +B C823 0.1 GVSW 7 6 5 4 3 2 1 C847 10P (CH) BCK 10K A_GND +B R862 CD_R 10K C849 0.022 X801 16.93MHz L853 CD_GND 100mA M_GND 1 1 2 2 3 3 4 4 5 5 CNW805 Q808 +B KTC3199 GR +B C816 0.022 C870 0.022 C872 0.
XL-1500W DISPLAY PWB-A2 A +B +B LCD701 FL DISPLAY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 B SW720 SW727 CLEAR VOLUME UP SW719 R716 10K SW718 R717 5.6K SW713 R718 3.9K SW712 R719 4.7K SW711 R720 3.9K FUNCTION C SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG9 SEG8 SEG10 SEG7 3 COM1 R727 R729 4 COM0 5 VLC3 47K 47K 6 VLC2 R723 R728 1K 8 VDD C703 0.1 9 OSC2 10 OSC1 X701 8MHz 11 VSS IC701 IX0043SJ SYSTEM MICROCOMPUT FL DRIVER 12 XI X702 32.
XL-1500W IC804 TA7291S CD LID MOTOR DRIVER 9 +B 8 7 6 5 4 3 2 1 +B R838 3.3K C845 47/16 +B C840 0.1 2 Q806 KRC102 M +B 2 R824 47K 82 R845 1.5K R825 2.2K 3 R836 1 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 R834 3.
XL-1500W FROM TUNER PWB-B1 CNS301 P25 11-D,E FRO DISPLAY CNW7 P29 1 TERMINAL PWB-A4 DOUT CNW804 3 1 J801 CD DIGITAL OUT 2 +B C866 0.0047 2 1 CNP301 FM SIGNAL CD SIGNAL R408 2.7K CHASSIS GND 3 2 1 3 2 1 R401 1K D651 1N5402M 1 2 3 4 F652 T2.5A L 250V Q606 KRA102 M C606 4700/25 +B RLY601 C607 470/25 Q603 2SD2012 Y L681 D686 1mH 1N4004 1 11.7V 20V SW651 VOLTAGE SELECTOR C661 0.001 D683 1N4004 R602 13V 100 D684 1N4004 C601 470/25 T681 POWER TRANSFORMER (SUB) R604 47 12.
XL-1500W FROM DISPLAY PWB-A2 CNW702 P29 11-F L2 R2 8 10K 10K R442 R440 3.9K 7 6 5 4 3 2 C433 220P C431 220P 5V 9.6V 4.8V 4.8V 1K 1K 1K R423 R424 R425 CNW909 1 1 2 2 +B CHASSIS GND D403 1N4004 D402 1N4004 CL DI CE L +B CNP909 C432 220P 1 C430 100/16 C407 10/16 2 C691 0.01 4.8V 4.8V 9 R437 6.8K AUX L L3 R3 R421 1K L4 C415 4.8V R4 4.8V RSL0 10/16 L1 R1 R417 1K C403 10/16 1 R201 8.
XL-1500W 3 D801 ZD801 15 28 R809 5 R808 CNW805 1 C808 B E + WH BK E SW702 PICKUP IN R864 RD ZD802 + RD BK WH C868 B Q808 R863 C R862 C869 1 R861 49 C827 C837 C843 45 50 55 P35 8-G CNP703 CNP707 P35 8-D P34 5-G CD MOTOR PWB-C 5 64 1 C860 R83 R846 R870 C851 15 14 17 16 13 TO MAIN PWB-A1 2 1 2 1 1 2 3 4 5 6 7 8 9 10 DISPLAY PWB-A BK GY GY GY GY GY GY GY GY GY GY BR E R841 R842 R843 R844 TO MAIN PWB-A1 20 1 10 60 C853 CNP803 25 IC801 1 2 3 4 5 6 7 8
XL-1500W D PWB-A3 D801 C802 C801 CNP801 1 16 CD PICKUP UNIT (308) 16 14 12 10 8 6 4 2 15 13 11 9 7 5 3 1 L805 R804 L801 C815 60 R820 C811 C822 C835 R832 R833 C819 R867 2 1 C850 16 13 CNP706 R866 5 CNP804 SWITCH PWB-A5 12 R848 15 14 17 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 1 6 7 R829 4 3 2 1 64 1 C860 R839 C847 R846 C851 16 9 D802 C814 C829 R827 C832 C833 C831 16 C848 R850 R849 1 C818 R818 R856 R821 R828 17 5 R870 R841 20 15 10 24 R816 C810 R815 IC801 2
XL-1500W J801 CD DIGITAL OUTPUT SO401 VIDEO/AUX INPUT RIGHT LEFT TERMINAL PWB-A4 A CHASSIS GND R406 R408 2 3 1 C866 C865 RD BK WH 3 C864 RD BK CHASSIS GND L401 CNW401 1 3 WH R405 R407 CNW804 1 C413 L804 JK101 HEADPH JACK MAIN PWB-A1 G VL VIOLET GY GRAY WH (W) WHITE BK BLACK PK PINK R127 R102 R438 R44 C430 C429 C431 10 11 C425 CNW707 P32 5-F C420 2 1 20 16 C424 C42 R421 R415 R416 R440 FROM DISPLAY PWB-A2 C423 IC401 15 CHASSIS GND 25 BLUE C416 C426 R425 10
XL-1500W SO651 AC POWER INPUT SOCKET AC 110,127,220,230~240V,50/60Hz SW651 VOLTAGE SELECTOR SO601 SPEAKER TERMINAL RIGHT LEFT 110V JK101 HEADPHONES JACK PWB-A1 220V 230~240V C124 C119 127V D101 D102 C113 C107 7 8 8 9 9 Q101 CNP703 2 1 R104 R106 R103 E C B C605 C606 B C E C101 1 C131 CNW102 2 D659 D657 C657 C651 7 8 C665 Q203 BK CNW909 C684 D683 D689 CNP701 5 CFW682 7 6 5 4 3 2 1 R686 R688 ZD683 2 1 Q683 B C E B C E CNP909 Q681 FROM DISPLAY CNW702 GND PWB-A2
XL-1500W TROUBLESHOOTING When the CD does not function When the CD section does not operate when the objective lens of the optical pickup is dirty, this section may not operate. Clean the objective lens, and check the playback operation. When this section does not operate even after the above step is taken,check the following items. Remove the cabinet and follow the troubleshooting instructions.
XL-1500W Make sure that the disc is normal, and set the CD TEST MODE (STEP 1). Is the measured voltage as specified in circuit diagram? Check the main unit power supply circuit. No Yes Is "Er-CD01" displayed"? No Yes Move the pickup to most internal circumference side of disc. Turn the power off and reset the CD TEST MODE (STEP 1). Is "PU ERROR " not displayed? No Check the pattern between pin 58 (PU_IN) of IC701 and CNW704/CNP704. Check the between CNW704/CNP704 and PU-IN switch.
XL-1500W • Laser failure. Is +7.2V applied to the pin 1 of CNW805 ? No Check the PWB pattern between emitter of Q605 and CNP805/ CNW805. Yes Check the peripheral parts of ZD801,C820 and C821. Is +5V applied to the cathode side of ZD801 ? No Yes No Check the PWB pattern between cathode side of ZD801 and pin 64 of IC801. No Check the PWB pattern between collector of Q802 and pin 1 of IC802.
XL-1500W • Focus servo sawtooth wave failure. Is sawtooh wave output to the pin 33 (FOO) of IC801 ? No IC801 is faulty. Yes 1.5~2.5sec Check the PWB pattern between pin emitter of Q605 and IC803. Is +7.0V applied to the pins 21 and 22 (VCC) of IC803 ? No Yes Is sawtooth wave obtained between pins 17 and 18 of IC803 ? No Yes Is +5V applied to the pin 7 (MUTE) of IC803 ? No Yes 1.5~2.5sec Check the PWB pattern between pin 7 of IC803 and pin 66 (CD STB) of IC701.
XL-1500W • HF error. Is output (tracking error signal) obtained at the pins 31 (TEI) and 32 (TEZI) of IC801 the CD TEST MODE "STEP 4" is changed to "STEP 5"? No Is output obtained at the pins 3 and No 8 of CNP801/CNW801. Optical pickup failure. Yes Yes test mode "step 4" Check the periphery of IC802. Check the PWB pattern between pin 11 (TEO) of IC802 and pins 31 and 32 of IC801. Is it normal ? test mode "step 5" TEI TEZI IC802 is faulty.
XL-1500W • Track search failure Does the sled motor run in FF/REW state when the SERVO TEST MODE "STEP1" is set? No Check as stated in item "SLED MOTOR OPERATION FAILURE". Yes Is the following wave output to the pin 34 (TRO) of IC801 during track search in normal playback? No IC801 failure. Yes TRO Is the following wave output to the pins 11 (TEO) of IC802 during track search in normal playback? No Yes TEO TEI Check the PWB pattern between pin 34 (TRO) of IC801 and pin 25 of IC803.
XL-1500W FUNCTION TABLE OF IC IC401 VHiLC75342M-1: Function/Volume Equaliser (LC75342M) Pin No. Port Name Function 1 DI Serial data and clock input pin for control. 2 CE Chip enable pin. Data written into an internal latch in a timing of [H] -> [L]. Each analog switch is activated. Data transfer enabled at [H] level. 3 VSS Ground pin. 4 TEST Electronic volume control pin. To be set to the VSS potential. 5 LOUT Volume + equalizer output pin.
XL-1500W IC401 VHiLC75342M-1: Function/Volume Equaliser (LC75342M) TEST VSS CE 4 3 2 DI CL VDD Vref NC 1 30 29 27 28 LOUT 5 CONTROL CIRCUIT LBASS1 7 LTRE 8 RVref 25 RBASS2 24 RBASS1 CONTROL CIRCUIT LBASS2 6 LOGIC CIRCUIT CCB INTERFACE LVref 26 ROUT 23 RTRE 22 RIN LIN 9 21 RSEL0 LSEL0 10 11 12 13 14 15 16 17 18 19 20 L4 L3 L2 L1 NC NC R1 R2 R3 R4 Figure 43 BLOCK DIAGRAM OF IC – 43 –
XL-1500W LCD701: RV-LX0015SJZZ LCD Display z1 z4 z2 r z3 q 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 PinNo com1 1 com1 2 com2 com3 PinNo com1 com2 com3 com4 22 h5 j5 l5 k5 23 g5 n5 m5 d5 24 a5 p5 f5 e5 com4 25 RDS b6 c6 ST com4 com2 3 com3 4 5 z1 b1 c1 z2 26 h6 j6 l6 k6 6 h1 j1 l1 k1 27 g6 n6 m6 d6 7 g1 n1 m1 d1 28 a6 p6 f6 e6 8 a1 p1 f1 e1 29 r b7 c7 q
XL-1500W PARTS GUIDE COMPACT AUDIO SYSTEM MODEL XL-1500W XL-1500W Compact Audio System consisting of XL-1500W (main unit) and CP-XL1500H (speaker system). “HOW TO ORDER REPLACEMENT PARTS” To have your order filled promptly and correctly, please furnish the following information. 1. MODEL NUMBER 2. REF. No. 3. PART NO. 4. DESCRIPTION For U.S.A. only Contact your nearest SHARP Parts Distributor to order.
XL-1500W NO. PRICE RANK PART CODE DESCRIPTION INTEGRATED CIRCUITS VHILA4282//-1 VHIKIA4558P-1 VHILC72131/-1 VHILA1832S/-1 J J J J AM AC AP AN IC401 VHILC75342M-1 J AN IC681 VHIKIA7805API J AF IC701 RH-IX0043SJZZ J AX IC801 IC802 IC803 VHITC94A14F-1 VHITA2157F/-1 VHIMM1469PH-1 J J J AY AN AN IC804 VHITA7291S/-1 J AH Power Amp.,LA4282 Surround Control ,KIA4558P PLL (Tuner),LC72131 FM IF Det./FM Mpx.
XL-1500W NO.
XL-1500W NO.
XL-1500W NO. R846 R848~854 R855,856 R857,858 R861,862 1 R863 R864 R865 R866 R867 R870 PRICE RANK PART CODE VRS-CY1JB104J VRS-CY1JB102J VRD-ST2CD102J VRS-CY1JB182J VRS-CY1JB103J VRG-ST2EM100J VRD-ST2EE101J VRD-ST2CD821J VRS-CY1JB683J VRS-CY1JB154J VRS-CY1JB103J J J J J J J J J J J J AA AA AA AA AA AC AA AA AA AA AA DESCRIPTION NO. 100 kohm,1/16W 1 kohm,1/16W 1 kohm,1/6W 1.
XL-1500W NO.
XL-1500W A 308-3 308 B 308-1 305 703 308-2 304 C 703 701 303 704 D 302 301 E 702x2 M701 F 307x2 M702 G 306x2 SW702 H PWB-C 1 2 3 4 Figure 6 CD MECHANISM EXPLODED VIEW –6– 5 6
XL-1500W 611 618x4 203 A 615x4 614x3 209 T651 214 612 239 211 240 604 B 213 Silicon Grease 205 208 IC101 210 614x2 C 601x6 243x4 237 yz, {| y,,yy,|{y ,z| y,|zy , 248 222 601 612 223 601x2 611 Q605 Q603 Q602 613x3 PWB-A4 249 PWB-A1 603 617 206 PWB-A8 230 D 225 215 201 216 228 246-1 246-4 616 246-3 233 232 236 CNW909 606x2 615x2 246-5 606 218 246-2 246-6 (M801) 219 E 204 236 PWB-A5 236 212 224 236 234 F PWB-B1 246 244 202 CD MECHANISM 221 242 606
XL-1500W A Tweeter SP603 (L-CH) SP604 (R-CH) 904 Black 904-1 White Line 904-3 Red B 904-2 903 Black Woofer SP601 (L-CH) SP602 (R-CH) 903-1 904-4 C 901 907 D 903-2 SP603, 604 903-3 E 906 SP601,602 908x4 F Tweeter SP603 (L-CH) SP604 (R-CH) G 902x2 905 Woofer SP601 (L-CH) SP602 (R-CH) H 1 2 3 4 Figure 8 SPEAKER EXPLODED VIEW –8– 5 6
XL-1500W –MEMO–
XL-1500W –MEMO–
XL-1500W COPYRIGHT © 2002 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
