MIKRO KOMPONENTEN SYSTEM MICRO-CHAÎNE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Mikro Komponenten System XL-35H besteht aus XL-35H (Hauptgerät) und CP-XL45H (Lautsprechersystem). Micro-chaîne XL-35H composée de XL-35H (appareil principal) et CP-XL45H (enceinte acoustique). Sistema micro XL-35H que consta de XL-35H (aparato principal) y CPXL45H (sistema de altavoces).
XL-35H BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES ● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillaeg nr. 93/68/EEC. ● Dette produktet oppfyller betingelsene i direktivene 89/336/ EEC og 73/23/EEC i endringen 93/68/EEC. ● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
● Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, todavía hay tensión dentro del aparato. Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, el aparato puede ponerse en funcionamiento utilizando el modo del temporizador o el controlador remoto. Advertencia: Tenga en cuenta que dentro de este aparato no hay piezas que pueda reparar. No quite nunca las tapas a menos que se esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
XL-35H ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet. Når ON/STAND-BY-knappen er sat i STAND-BY position, kan apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen. Advarsel: Apparatet indeholder ingen dele, der kan repareres af brugeren selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil. Apparatet indeholder farlig strømspaending.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
XL-35H ● VORSICHT Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen. Da der in diesem Compact Disc Player verwendete Laserstrahl für die Augen schädlich ist, ist das Gehäuse unter keinen Umständen zu zerlegen. Wenden Sie sich für Wartungsarbeiten nur an berechtigten Fachhändler. ● ATTENTION Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement.
Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW XL-35H Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
ENGLISH XL-35H ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! General Information Accessories Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4 ! Preparation for Use System connections . . . . .
Precautions XL-35H " Please ensure that the equipment is positioned in a well-ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 20 cm (8") of free space on the top of the unit. 10 cm (4") 10 cm (4") 20 cm (8") 10 cm (4") " Use the unit on a firm, level surface free from vibration.
XL-35H Controls and indicators ENGLISH 1 2 6 7 8 9 3 General Information 4 10 11 12 13 14 5 15 16 17 18 19 20 21 22 23 25 26 24 27 Reference page 1. CD Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. CD Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XL-35H ENGLISH 1. Full-Range Speaker 2. Speaker Wire 3 4 5 6 7 8 9 10 11 12 13 1 16 17 18 19 20 21 22 23 24 25 14 15 26 Buttons with " " mark in the illustration can be operated on the remote control only. Reference page 3. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6.
XL-35H System connections ENGLISH FM aerial AM loop aerial (See page 21.) VCR, DVD, etc. Preparation for Use Right speaker Left speaker RCA lead (not supplied) Right speaker Left speaker White line Black Wall socket (AC 230 V, 50 Hz) E-5 02/9/11 Downloaded From Disc-Player.com Sharp Manuals XL35H_H_E1.
XL-35H ENGLISH ! Aerial connection ! Speaker connection Connect the FM/AM loop aerial to the ANTENNA socket. Connect the wire with the white line to the minus (-) terminal and the black wire to the plus (+) terminal. Notes: " Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception. " Do not connect the attached FM aerial to an external FM aerial. Otherwise, trouble may occur.
XL-35H ENGLISH Remote control ! Battery installation ! Test of the remote control 1 2 Face the remote control directly to the remote sensor on the unit. 3 Remove the battery cover. Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. The remote control can be used within the range shown below: Press the ON/STAND-BY button.
Sound control XL-35H ENGLISH ! Adjusting the volume Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME + button to increase the volume and the VOLUME - button to decrease the volume. 2 ..... 28 29 MAX ! Adjusting the bass Main unit operation: 1 Press the BASS/TREBLE button to select "BASS". 2 Within 5 seconds, turn the VOLUME control to adjust the bass.
XL-35H Setting the clock ENGLISH 3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. When the 12-hour display is selected, "AM" will change automatically to "PM". 4 Basic Operation This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. 1 Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button.
Listening to a CD ENGLISH 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the ment. 4 Place a CD on the spindle, label side up. 5 Close the CD compartment by firmly pushing the corner marked "PUSH CLOSE". Press the FUNCTION button until "CD STOP" appears on the display. When operating with the remote control, press the CD button.
XL-35H Listening to a CD (continued) ENGLISH " Care of compact discs To interrupt playback: Main unit operation: Press the button. To resume playback from the same point, press the button again. Remote control operation: Press the button. To resume playback from the same point, press the button. To stop playback: Press the button. To remove the CD: Whilst in the stop mode, press the CD EJECT button.
XL-35H „ To locate the desired portion ENGLISH „ Random play The tracks can be played in random order automatically. but- For audible fast reverse: Press and hold down the button on the main unit or the ton on the remote control during playback. but- Notes: z Normal playback will resume when the ( ) or ( ) button is released. z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused.
XL-35H ENGLISH Programmed play You can choose up to 20 selections for playback in the order you like. 3 Press the MEMORY (MEMORY/SET) button to save the track number. 4 Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be programmed. 5 Press the CD Playback Playback order 1 2 Whilst in the stop mode, press the MEMORY (MEMORY/ SET) button to enter the programming save mode. Within 30 seconds, press the desired track.
Listening to the radio XL-35H ENGLISH 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". Notes: ! This can be operated by pressing the TUN.
XL-35H ENGLISH Listening to the memorised station " Memorising a station You can store 30 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in "Listening to the radio" on page 14. 3 Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. Radio 4 Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.
Listening to a cassette tape XL-35H 3 Open the cassette compartment by pushing the area marked "PUSH EJECT ". 4 Load a cassette into the cassette compartment with the side to be played facing toward you. 5 Close the cassette compartment by pushing the area marked "PUSH EJECT ". 6 Press the button to start playback. When playback is performed using the remote control, press the button. To stop playback: Press the button.
XL-35H Recording to a cassette tape Before recording: ! When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. ! SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. ! The volume and sound controls can be adjusted with no effect on the recorded signal (Variable Sound Monitor). ! For recording, use only normal tapes. Do not use metal or CrO tapes.
XL-35H To stop recording: Press the button. The tape will stop. When the stop. button. button. button is pressed again, the CD will ! Recording from the radio 1 Tune in to the desired station (see page 14). 2 Load a cassette into the cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed. 3 Press the ENGLISH ! Erasing a recorded tape button. 1.
XL-35H ENGLISH Timer and sleep operation This may be operated only with the remote control. Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. " Timer playback Before setting timer: 1 Press the CLOCK button to check that the clock is set to the correct time. 2 Load a cassette or disc to be played. 1 2 Press the ON/STAND-BY button to turn the power on.
XL-35H 6 Within 1 minute, press the PRESET ( or ) button to specify the minutes to start, then press the MEMORY button. ! The timer playback starting time, function, and volume will be displayed, and then the unit will enter the stand-by mode automatically. ! " " will appear and the current time will be displayed. ENGLISH " Sleep operation 1 2 Play back the desired sound source. Press the SLEEP button.
Enhancing your system XL-35H ENGLISH " To use timer and sleep operation together Example: To fall asleep and wake to the same radio station You can play back the same source only (the function cannot be switched). The connection lead is not included. Purchase a commercially available lead as shown below. White Advanced Features 1 2 Set the sleep time (steps 1 - 2, page 20). Red Whilst the sleep timer is set, set the desired playback time (steps 4 - 6, pages 19 - 20). 1.Sleep timer setting 2.
Troubleshooting chart The radio makes unusual noises continuously. " General Symptom Possible cause The clock is not set to the correct time. ! Did a power failure occur? Reset the clock (refer to page 9). When a button is pressed, the unit does not respond. ! Set this unit to the power stand-by mode and then turn it back on. No sound is heard. ! Is the volume level set to "MIN"? ! If the unit still malfunctions, reset it. (Refer to page 23.
Maintenance XL-35H ENGLISH " If trouble occurs " Cleaning the CD pickup lens When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab.
Specifications " General Power source AC 230 V, 50 Hz Power consumption Power on: 26 W Power stand-by: 0.
SHARP CORPORATION 9906 TINSZ0169SJZZ 02K N HK 3 Downloaded From Disc-Player.
DOWN UP XL-35H MICRO COMPONENT SYSTEM Downloaded From Disc-Player.