MIKRO KOMPONENTEN SYSTEM MICRO-CHAÎNE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Mikro Komponenten System XL-55H besteht aus XL-55H (Hauptgerät) und CP-XL65H (Lautsprechersystem). Micro-chaîne XL-55H composée de XL-55H (appareil principal) et CP-XL65H (enceinte acoustique). Sistema micro XL-55H que consta de XL-55H (aparato principal) y CP-XL65H (sistema de altavoces).
XL-55H BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES ● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillaeg nr. 93/68/EEC. ● Dette produktet oppfyller betingelsene i direktivene 89/336/ EEC og 73/23/EEC i endringen 93/68/EEC. ● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
● Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, todavía hay tensión dentro del aparato. Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, el aparato puede ponerse en funcionamiento utilizando el modo del temporizador o el controlador remoto. Advertencia: Tenga en cuenta que dentro de este aparato no hay piezas que pueda reparar. No quite nunca las tapas a menos que se esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
XL-55H ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet. Når ON/STAND-BY-knappen er sat i STAND-BY position, kan apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen. Advarsel: Apparatet indeholder ingen dele, der kan repareres af brugeren selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil. Apparatet indeholder farlig strømspaending.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
XL-55H ● VORSICHT Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen. Da der in diesem Compact Disc Player verwendete Laserstrahl für die Augen schädlich ist, ist das Gehäuse unter keinen Umständen zu zerlegen. Wenden Sie sich für Wartungsarbeiten nur an berechtigten Fachhändler. ● ATTENTION Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement.
Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW XL-55H Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
ENGLISH XL-55H ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. General Information Accessories Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4 Preparation for Use System connections . . . . .
Precautions XL-55H z Please ensure that the equipment is positioned in a well-ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 20 cm (8") of free space on the top of the unit. 10 cm (4") 10 cm (4") 20 cm (8") 10 cm (4") z Use the unit on a firm, level surface free from vibration.
XL-55H Controls and indicators ENGLISH 1 2 6 7 8 9 3 General Information 4 10 11 12 13 14 5 15 16 17 18 19 23 24 25 26 20 21 22 27 28 29 30 Reference page 1. CD Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2. CD Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4. Cassette Compartment . . . . . . . . . . . . . . . . . . . . . . . . .
XL-55H 1. Tweeter 2. Woofer 3. Speaker Wire 4. Bass Reflex Duct Speaker grilles are removable: Make sure nothing comes into contact with the speaker diaphragms when you remove the speaker grilles. 1 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 4 19 20 21 22 23 24 25 26 27 28 29 Buttons with " " mark in the illustration or highlighted in bold on the right can be operated on the remote control only. Reference page 5. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6.
XL-55H System connections ENGLISH MD recorder not supplied (See page 23.) FM aerial AM loop aerial Left speaker Right speaker Preparation for Use (See page 23.) VCR, DVD, etc. not supplied Right speaker Left speaker White line Black Wall socket (AC 230 V, 50 Hz) E-5 02/12/20 Downloaded From Disc-Player.com Sharp Manuals XL_55H_H_E1.
XL-55H ENGLISH Aerial connection Speaker connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Connect the wire with the white line to the minus (-) terminal and the black wire to the plus (+) terminal. Supplied AM loop aerial: Connect the AM loop aerial to the LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
XL-55H ENGLISH Remote control Battery installation Test of the remote control 1 2 Face the remote control directly to the remote sensor on the unit. 3 Remove the battery cover. Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. The remote control can be used within the range shown below: Press the ON/STAND-BY button.
Sound control XL-55H ENGLISH Adjusting the bass Main unit operation: 1 Press the BASS/TREBLE button to select "BASS". 2 Within 5 seconds, turn the VOLUME control to adjust the bass. Remote control operation: Press the BASS (- or +) button to adjust the bass. -5 ... 0 ... 5 Main unit operation: 1 Press the BASS/TREBLE button to select "TRE". 2 Within 5 seconds, turn the VOLUME control to adjust the treble. Remote control operation: Press the TREBLE (- or +) button to adjust the treble. -5 ...
XL-55H Setting the clock ENGLISH 3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. When the 12-hour display is selected, "AM" will change automatically to "PM". 4 Basic Operation This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. 1 Within 1 minute, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY button.
Listening to a CD ENGLISH 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the ment. 4 Place a CD on the spindle, label side up. 5 Close the CD compartment by firmly pushing the corner marked "PUSH CLOSE". Press the FUNCTION button until "CD STOP" appears on the display. When operating with the remote control, press the CD button.
XL-55H Listening to a CD (continued) ENGLISH To interrupt playback: Main unit operation: Press the button. To resume playback from the same point, press the Remote control operation: Press the button. To resume playback from the same point, press the " Care of compact discs button again. button. To stop playback: Press the button. CD Playback To remove the CD: Whilst in the stop mode, press the CD EJECT button.
XL-55H " To locate the desired portion ENGLISH " Repeat play All tracks or a programmed sequence can be continuously repeated. For audible fast forward: Press and hold down the button on the main unit or the ton on the remote control during playback. but- For audible fast reverse: Press and hold down the button on the main unit or the ton on the remote control during playback. but- To repeat all tracks: Press the REPEAT button. " Random play The tracks can be played in random order automatically.
XL-55H ENGLISH Programmed play You can choose up to 20 selections for playback in the order you like. 3 Press the MEMORY (MEMORY/SET) button to save the track number. 4 Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be programmed. 5 Press the CD Playback Playback order 1 2 Whilst in the stop mode, press the MEMORY (MEMORY/ SET) button to enter the programming save mode. Within 30 seconds, press the desired track.
Listening to the radio XL-55H ENGLISH 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Press the FUNCTION button until "FM" or "AM" appears on the display. When operating with the remote control, press the TUNER (BAND) button to select "FM" or "AM". Notes: ! This can be operated by pressing the TUN.
XL-55H ENGLISH Listening to memorised stations " Memorising a station You can store 30 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 2 Perform steps 1 - 3 in "Listening to the radio" on page 14. 3 Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. Radio 4 Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.
Listening to a cassette tape XL-55H ENGLISH 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button until "TAPE" appears on the display. When operating with the remote control, press the TAPE button. 3 Open the cassette compartment by pushing the area marked "PUSH EJECT ". 4 Load a cassette into the cassette compartment with the side to be played facing toward you. 5 Close the cassette compartment by pushing the area marked "PUSH EJECT ".
XL-55H Listening to a cassette tape (continued) ENGLISH To stop playback: Press the button. Tape Playback Fast forward/rewind: To advance the tape, press the button on the main unit or the button on the remote control. To rewind it, press the button on the main unit or the button on the remote control. Caution: ! To remove the cassette, press the button, and then open the compartment. ! Before changing from one tape operation to another, press the button.
Recording to a cassette tape XL-55H Erase-prevention tabs of cassette tapes: ! When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. Tab for side B ! To protect the recorded sound, remove the tab after recording. Cover the tab hole with the adhesive tape to record on the tape without the tab. " Recording from a CD 1 Press the ON/STAND-BY button to turn the power on.
XL-55H Recording to a cassette tape (continued) ENGLISH To perform programmed recording: 1 Programme tracks (see page 13). 2 Press the button. 3 Press the ( ) button. Tape Recording To interrupt recording: Main unit operation: Press the button. To resume recording, press the Remote control operation: Press the button. To resume recording, press the To stop recording: Press the button. The tape will stop. When the stop. " Recording from the radio 1 Tune in to the desired station (see page 14).
Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Sleep operation: The radio, compact disc and cassette tape can all be turned off automatically. ENGLISH " Timer playback Before setting timer: 1 Press the CLOCK button to check that the clock is set to the correct time. (Refer to page 9.) 2 Load a cassette or disc to be played. 1 2 Press the ON/STAND-BY button to turn the power on.
XL-55H Timer and sleep operation (continued) ENGLISH 6 Within 1 minute, press the PRESET ( or ) button to specify the minutes to start, then press the MEMORY button. ! The timer playback starting time, function, and volume will be displayed, and then the unit will enter the stand-by mode automatically. ! " " will appear and the current time will be displayed. " Sleep operation 1 2 Play back the desired sound source. Press the SLEEP button.
Enhancing your system " To use timer and sleep operation together XL-55H ENGLISH " Headphones Example: To fall asleep and wake up to the same radio station You can play back the same source only (the function cannot be switched). Set the sleep time (steps 1 - 2, page 21). Whilst the sleep timer is set, set the desired playback time (steps 4 - 6, pages 20 - 21). ! Before plugging in or unplugging the headphones, reduce the volume. ! Be sure your headphones have a 3.
XL-55H Enhancing your system (continued) ENGLISH The connection lead is not included. Purchase a commercially available lead as shown below. White (CD only) Red Advanced Features VCR, DVD, etc. " Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/AUX IN sockets. When using video equipment, connect the audio output to this unit and the video output to a television. 2 Press the ON/STAND-BY button to turn the power on.
Troubleshooting chart " General Symptom Possible cause The clock is not set ! Did a power failure occur? Reset the clock to the correct time. (refer to page 9). When a button is pressed, the unit does not respond. ! Set this unit to the power stand-by mode and then turn it back on. ! If the unit still malfunctions, reset it (refer to page 25). No sound is heard. ! Is the volume level set to "MIN"? The radio makes un- ! Is the unit placed near the TV or computusual noises continer? uously.
Maintenance XL-55H ENGLISH " If trouble occurs " Cleaning the CD pickup lens When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab.
Specifications " General Power source AC 230 V, 50 Hz Power consumption Power on: 50 W Dimensions Width: 160 mm (6-5/16") Height: 240 mm (9-1/2") Depth: 297 mm (11-11/16") Weight 3.6 kg (8.0 lbs.) Power stand-by: 0.
SHARP CORPORATION 9906 TINSZ0193SJZZ 02M N HK 1 Downloaded From Disc-Player.
DOWN UP XL-55H MICRO COMPONENT SYSTEM Downloaded From Disc-Player.
