MICRO COMPONENT SYSTEM SISTEMA MICRO MICRO-CHAÎNE MODEL MODELO MODÈLE XL-DH10NH XL-DH20NH OPERATION MANUAL MANUAL DE MANEJO MODE D’EMPLOI XL-DH10NH CD USB XL-DH20NH CD USB MUTE MUTE CLOCK/TIMER CLOCK/TIMER TUNING/ FOLDER TUNING/ FOLDER PTY PTY RDS RDS AUX AUX iPod is a trademark of Apple Inc., registered in the U.S. and other countries. ENGLISH ESPAÑOL FRANÇAIS Downloaded From Disc-Player.com Sharp Manuals Please refer to pages i to viii and E-1 to E-22.
BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS ERITYISHUOMAUTUS SPECIAL NOTES ● Quando il tasto ON/STAND-BY si trova in posizione STAND- BY, all’interno dell’apparecchio c’è ancora la corrente. Se il tasto ON/STAND-BY si trova nella posizione STANDBY, l’unità può essere accesa con il modo timer o con il telecomando. Avvertenza: L’apparecchio non contiene parti riparabili dall’utente.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es dürfen keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
● Advarsel: Til at forbygge ild og stød risiko, lad vaere med at undsaette denne indretning for drypning eller overstaenkning. Der må ikke anbringes nogen genstande fyldt med vand, som for eksempel vaser, på dette apparat. ● VORSICHT Dieses Gerät enthält eine SchwachstromLasereinheit. Um die sichere Funktionsweise des Gerätes zu gewährleisten, sollten keine Abdeckungen entfernt oder auf innen liegende Teile zugegriffen werden. Das Gerät sollte nur von qualifiziertem Personal gewartet und repariert werden.
„Made for iPod“ bedeutet, dass ein elektronisches Zubehörteil speziell für den Anschluss an ein iPod konzipiert wurde und der Entwickler dafür garantiert, dass das Gerät den Leistungsstandards von Apple entspricht. « Made for iPod » signifie qu’un accessoire électronique a été conçu pour se connecter spécifiquement à un iPod et a été certifié par le développeur comme correspondant aux standards de performance d'Apple.
Informations sur la mise au rebut correcte Apple ist nicht verantwortlich für den Betrieb dieses Gerätes oder dafür, dass es Sicherheits- und Regulierungsstandards einhält. Apple n'est pas responsable de la manière de faire fonctionner cet appareil ni de sa conformité avec les standards de sécurité et de réglementation. Apple no se responsabiliza por el funcionamiento de este dispositivo o por su cumplimiento con las normas de seguridad y regulatorias.
Información sobre la eliminación Informazioni per un corretto smaltimento A. Información sobre eliminación para usuarios particulares 1. En la Unión Europea Atención: si quiere desechar este equipo, ¡por favor no utilice el cubo de la basura habitual! Los equipos eléctricos y electrónicos usados deberían tratarse por separado de acuerdo con la legislación que requiere un tratamiento, una recuperación y un reciclaje adecuados de los equipos eléctricos y electrónicos usados.
Informação sobre Eliminação de Produtos Information on Proper Disposal A. Informações sobre a Eliminação de Produtos para os Utilizadores (particulares) 1. Na União Europeia Atenção: Se quiser eliminar este equipamento, não o deve fazer juntamente com o lixo doméstico comum! O equipamento eléctrico e electrónico deve ser tratado separadamente e ao abrigo da legislação aplicável que obriga a um tratamento, recuperação e reciclagem adequados de equipamentos eléctricos e electrónicos usados.
Informationen zur Batterieentsorgung Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei enthalten. Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien, welche eine ordnungsgemäße Behandlung und Verwertung entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten erhalten Sie von IhrerGemeindeverwaltung.
ENGLISH XL-DH10NH Micro Component System consisting of XL-DH10NH (main unit) and CP-DH10NH (speaker system). XL-DH20NH Micro Component System consisting of XL-DH20NH (main unit) and CP-DH20NH (speaker system). Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.
Precautions ■ ● Do not remove the outer cover, as this may result General ● Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") 10 cm (4") ● Use the unit on a firm, level surface free from vibration.
Controls and indicators (continued) ■ 1 Page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5 2. On / Stand-by Button. . . . . . . . . . . . . . 5, 6, 7, 8, 18 3. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . 9 4. Play Mode Button . . . . . . . . . . . . . . . . . . . 9, 10, 13 5. iPod Display (TV OUT) Button . . . . . . . . . . . . . . . 4 6. CD / USB Stop Button . . . . . . . . . . . . . . . . . . . 9, 12 7. CD / USB Display Button. . . . . . . . . . . . . . . .
System connections Make sure to unplug the AC power lead before making any connections.
Remote control ■ General control Battery installation 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the (–) battery terminals. 3 Close the cover. CD USB MUTE CLOCK/TIMER Caution: ● Replace all old batteries with new ones at the same time. ● Do not mix old and new batteries. ● Remove the batteries if the unit will not be used for a long period of time.
Setting the clock (Remote control only) Listening to the iPod Supported iPod models: ● iPod nano (software 1.2 above) ● iPod mini (software 1.2 above) ● iPod (5th generation) (software 1.3 above) (Dock connector equipped Click Wheel model) ● iPod (4th generation) (software 3.0.2 above) (Dock connector equipped Click Wheel model) ● iPod nano (2nd generation) (software 1.0.0 above) ● iPod nano (3rd generation) (software 1.0.3 above) ● iPod nano (4th generation) (software 1.0.
Listening to the iPod (continued) ■ To insert iPod adaptor 1 Press the ON/STAND-BY button to turn the power on. 2 Open the iPod cover by pulling up the tip. pull up 3 Insert the iPod adaptor into the iPod dock and connect CD USB MUTE your iPod. iPod (bottom) CLOCK/TIMER TUNING/ FOLDER iPod PTY RDS AUX Dock connector ■ iPod playback 1 Press the ON/STAND-BY button to turn the power on.
Listening to the iPod (continued) ■ Listening to a CD or MP3/WMA disc Watching videos on a TV connected to iPod 1 Press the DISPLAY (TV OUT) button for more than 2 seconds. “TV DISP” will appear on display. 2 Select the desired video from iPod unit to be played. 3 Press the ENTER button to start playback. Notes: ● If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.
Listening to a CD or MP3/WMA disc (continued) ■ Advanced CD or MP3/WMA disc playback Disc playback 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button on the remote control or FUNCTION button on the main unit repeatedly to select CD function. 3 Press the OPEN/CLOSE button to open the disc tray. 4 Place the disc on the disc tray, label side up. CD USB MUTE CLOCK/TIMER TUNING/ FOLDER PTY RDS AUX ■ 5 Press the OPEN/CLOSE button to close the disc tray.
Advanced CD or MP3/WMA disc playback (continued) ■ 5 Press the Random play The tracks on the disc can be played in random order automatically. / button to start playback. 6 Press the CD button. The total number in memory will appear. To random play all tracks: Press and hold down PLAY MODE button on the remote control until “RANDOM” icon light up. Press the / button. To cancel random play: Press and hold the PLAY MODE button. “RANDOM” icon will disappear.
MP3/WMA folder mode (only for MP3/WMA files) To play back MP3/WMA (Windows Media Audio) file There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) music files. Follow the instructions from the website on how to download the music files. You can then play back these downloaded music files by burning them to a CD-R/RW disc. ● Your downloaded song/files are for personal use only. Any other usage of the song without owner’s permission, is against the law.
Listening to USB mass storage device/MP3 player ■ To play back USB/MP3 player with folder mode on 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the track information will be displayed. 2 Press the FOLDER ( or ) button to select desired playback folder. To start playback, go to step 4.
Listening to USB mass storage device/MP3 player (continued) Advanced USB playback (continued) Notes: ● This product can play WMA and MP3 files. It will automatically detect the file type being played. If unplayable file is played on this product, the file will be automatically skipped. This will take a few seconds. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again. ● This product relates to USB mass storage devices and MP3 players.
Listening to the radio ■ Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in “Tuning”. 2 Press the MEMORY button. 3 Within 5 seconds, press the or button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Press the MEMORY button to store that station in CD USB MUTE memory.
Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc. When tuned to an RDS station, “RDS” and the station name will be displayed.
Using the Radio Data System (RDS) (continued) ■ ■ Notes for RDS operation If any of the following events occur, it does not mean that the unit is faulty: ● “PS”, “NO PS” and a station name appear alternately, and the unit does not operate properly. ● If a particular station is not broadcasting properly or a station is conducting tests, the RDS reception function may not work properly. ● When you receive an RDS station whose signal is too weak, information like the station name may not be displayed.
Using the Radio Data System (RDS) (continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) You can search for and receive the following PTY, TP and TA signals. NEWS Short accounts of facts, events and publicly expressed views, reportage and actuality. AFFAIRS Topical programme expanding or enlarging upon the news, generally in different presentation style or concept, including debate, or analysis.
Timer and sleep operation (Remote control only) ■ Timer playback Before setting timer: 1 Check that the clock is set to the correct time (refer to page 6). If it is not set, you cannot use the timer function. CD USB MUTE CLOCK/TIMER 2 For timer playback, load the disc to be played back. TUNING/ FOLDER 1 Press the ON/STAND-BY button to turn the power on. 2 Press the CLOCK/TIMER button for about 2 seconds.
Timer and sleep operation (Remote control only) (continued) 10 Press the or button to select wake up source (CD, USB, Tuner, iPod) then press the CLOCK/ TIMER button to confirm. ■ Sleep operation The radio, compact disc and USB can all be turned off automatically. 1 Play back the desired sound source. 2 Press the SLEEP button. 11 If “TUNER” is selected, press the CLOCK/TIMER button to enter the preset selection mode. 3 Within 10 seconds, press the SLEEP button repeatedly to select the time.
Enhancing your system Troubleshooting chart The connection lead is not included. Purchase a commercially available lead as shown below. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
Troubleshooting chart (continued) ■ ■ USB Symptom ● Device cannot be detected. ● ● ● ● ● Playback does not ● start. ● Wrong time display. ● Wrong file name display. ● Recording cannot start.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ■ ■ Support file ● MPEG 1 Layer 3 ● WMA (Non DRM) General USB USB host interface ● Complies with USB 1.1 (Full Speed)/ 2.0 Mass Storage Class.
92L410CM903011 Downloaded From Disc-Player.