Specifications

ManualsBrandsSharp Manualsaudio & home theatreXL-DK227NH

XL-DK257NH

XL-DK227NH

2008/June/13 XL-DK227NH/DK257NH_AUS

CD or MP3/WMA disc Playback

 Programmed play

You can choose up to 32 selections for playback in the order you like.

To cancel the programmed play mode:

Whilst in the stop mode and the “MEMORY” indicator is lit, press the

CLEAR/DIMMER button on the remote control. The “MEMORY”

indicator will disappear and all the programmed contents will be

cleared.

Adding tracks to the programme:

If a programme has been previously stored, the “MEMORY” indicator

will be displayed. Then follow steps 1 - 6 to add tracks. The new

tracks will be stored after the last track of the previous programme.

To check which tracks are programmed:

Whilst the unit is stopped in the programmed play mode, press the

or button.

MP3/WMA folder programmed:

Only tracks in the same folder can be select. Select which folder to

be progammed before entering programme mode. (refer page 21 to

select folder)

Notes:

 When a disc ejected, the programme is automatically cancelled.

 Even if you press the ON/STAND-BY button to enter the stand-by

mode or change the function from CD to another, the programmed

selections will not be cleared.

 During the programme operation, random play is not possible.

1 Whilst in the stop mode, press

the MEMORY button on the

remote control to enter the

programming save mode.

2 Press the direct search buttons

on the remote control to select

the desired track.

Selected track number

You can also select a track by pressing the or button.

3 Press the MEMORY button to

save the track number.

4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be

programmed.

If you make a mistake, the programmed tracks can be cleared

by pressing the CLEAR/DIMMER button.

5 Press the (CD ) button.

The total number in memory will

appear.

6 Press the / button to start playback.

To clear the programmed selections:

Press the CLEAR/DIMMER button on the

remote control whilst the “MEMORY”

indicator is flashing.

Each time the button is pressed, one track will

be cleared, beginning with the last track

programmed.