Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. DVD MICRO SYSTEM MODEL XL-DV60 OPERATION MANUAL XL-DV60 DVD Micro System consisting of XL-DV60 (main unit), CPDV60F (front speakers) and CP-DV60SW (subwoofer).
XL-DV60 SPECIAL NOTES Important Instruction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS be read before the product is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4 Follow Instructions - All operating and use instructions should be followed.
Important Instruction XL-DV60 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Accessories "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. XL-DV60 Please confirm that the following accessories are included. NOTES Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618, 5,610,985, 5,740,317, 5,777,992, 5,878,080 or 5,960,037.
XL-DV60 Contents " General Information Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 10 Description of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 13 General Information " Preparation for Use 6 " Video CD Operation Page Playing a video CD To play a video CD with P. B. C. (playback control) . . . . . . . .
Precautions XL-DV60 " General ! Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) ! Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. ! Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
XL-DV60 Controls and indicators General Information " Front panel 1 2 11 3 12 13 14 15 16 17 4 5 6 7 8 18 9 10 1 2 3 4 5 6 7 8 9 10 8 11 12 13 14 Reference page 1. Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 2. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 3. DVD/CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 4. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . .
XL-DV60 " Rear panel 1 5 6 2 7 8 9 3 " Front speaker 1 2 3 1. Semi Dome Tweeter 2. Woofer 3. Bass Reflex Duct 4. Speaker Wire General Information 4 Reference page 1. AC Power Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3. Component Video Output Jacks . . . . . . . . . . . . . . . . . . . . . 17 4. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XL-DV60 Controls and indicators (continued) " Remote control 1 2 19 3 20 General Information 4 21 5 6 7 8 9 10 11 12 13 14 22 23 24 25 26 27 28 29 30 31 15 16 17 18 10 32 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 19 2. DVD Setup Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. Direct Number Buttons . . . . . . . . . . . . . . . . . . . . .
Description of discs XL-DV60 The unit can play back discs bearing any of the following marks: Disc type DVD Video Disc for NTSC system Or DVD-R/DVD-RW/DVD+R/ DVD+RW recorded in video mode (*1) Video CD for NTSC system Audio CD (*1): Discs including DVD-R/DVD-RW/DVD+R/DVD+RW may not be played back due to properties and scratches on the disc, dirty optical pickup lens, etc. (*2): Only the audio on the CDV can be played.
XL-DV60 Description of discs (continued) " DVD-Video " Video CD/audio CD A popular type of DVD disc of the same size as a CD, mainly containing video images. Track Video CD and audio CD are composed of "tracks". Tracks are equivalent to songs on a CD. General Information Region number DVD discs are programmed with region numbers indicating countries in which they can be played. This system can play discs with region number "1" or "ALL".
XL-DV60 " Discs that cannot be played Check the icons of the DVD jacket before playing your discs. Display Description Format recorded on the DVD Select a type according to the connected TV type. Type of subtitles recorded Example: Recorded subtitle languages. You can select a subtitle language. 2 1. English 2. German Number of camera angles 2 Number of angles recorded on the DVD. You can view scenes from different angles.
XL-DV60 System connections Make sure to unplug the AC power cord before making any connections.
XL-DV60 " FM/AM loop antenna connection " Speaker connection Connect the FM/AM loop antenna to the ANTENNA jack. Insert the front speaker plugs (black) into the FRONT terminals. Insert the subwoofer plug (red) into the SUBWOOFER terminal. Position the FM antenna wire and rotate the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf, or attach it to a stand or a wall.
XL-DV60 System connections (continued) " Placing the speaker system Same distance " TV connection Three types of jacks (VIDEO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT) are available for connection of a TV and this unit. Connect according to your TV. Preparation for Use Connecting to a TV with a video input jack: You can enjoy DVD images by connecting your TV and this unit with the supplied video cable.
XL-DV60 Connecting to a TV with an S-video input jack: If your TV is equipped with an S-video input jack, you can enjoy higher quality images by connecting it with an S-video cable (not supplied). Connecting to a TV with component video input jacks: If your TV is equipped with component video input jacks, purchase a component video cable to enjoy higher quality images. Set the video mode to "Interlace" (default setting). For the procedure, refer to "Changing the video mode".
Preparation for Use XL-DV60 System connections (continued) " Connecting the AC power cord " Demonstration mode After checking all the connections have been made correctly, connect the AC power cord to the AC power input jack, then plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode. When you plug the unit in for the first time, the unit will enter the demonstration mode. You will see words scroll.
Remote control XL-DV60 " Battery installation Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them toward the battery terminals. Replace the cover. Notes concerning use: ! Replace the batteries if the operating distance is reduced or if the operation becomes erratic.
XL-DV60 General control " Bass control (X-BASS) Preparation for Use When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (XBASS) button. " Equalizer When the EQUALIZER (EQ-MODE) button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER (EQ-MODE) button repeatedly until the desired sound mode appears.
Setting the clock XL-DV60 3 Within 30 seconds, press the PRESET ( or ) button to adjust the hour and then press the MEMORY/SET button. Press the PRESET ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. Within 30 seconds, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY/SET button. Press the PRESET ( or ) button once to advance the time by 1 minute. Hold it down to advance continuously.
XL-DV60 Playing a disc Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2", etc. accordingly. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Place the disc on the disc tray 1, label side up. Press the DVD/CD button. Press the OPEN/CLOSE button to open the disc compartment. All trays open in tiers. DVD Operation Be sure to place 3" (8 cm) discs in the middle of the disc trays. 5" (12 cm) 5 To place discs in the trays 2 - 5. 1.
XL-DV60 6 Press the OPEN/CLOSE button to close the disc compartment. To play from a specified disc: 1. Press the 1 - 5 button. 2. Press the (play) button. Discs supporting auto start will start to play once you close the disc tray even if you do not press the (play) button. Selected disc number If playback does not start, press the (play) button.
XL-DV60 Playing a disc (continued) DVD Operation Caution: ! Do not place two discs in one disc tray. ! Do not play discs with special shapes (heart or octagon shaped) as it may cause malfunctions. 24 ! Do not push the disc compartment while it is moving. ! If the power fails while the disc compartment is open, wait until the power is restored. ! If the disc compartment is stopped with force, the unit will not function.
Basic operation XL-DV60 " Fast forward/Fast reverse (search) You can search the desired point as you play the disc. 1 While a disc is playing, hold down the or button for 2 seconds or more. Fast Forward 2x " To locate the beginning of a chapter/track (skip) Fast Reverse 2x / Fast Forward 2x Fast Reverse 8x / Fast Forward 8x Fast Reverse 30x / Fast Forward 30x Play Play / ! The speed cannot be changed on MP3 discs. ! The disc is forwarded by the button.
XL-DV60 Basic operation (continued) " To start playback from the desired point (direct play) To select and play the desired title and chapter: 1 While in the stop or playback mode, press the DIRECT button. 2 Within 10 seconds, select the title or chapter by pressing the cursor ( or ) button and enter the title or chapter number by using the direct number buttons.
XL-DV60 " Slow-motion play To play by specifying time (time search): While a disc is playing, press the DIRECT button. 1 While a disc is playing, press the STILL/PAUSE button. Within 10 seconds, select the time by pressing the cursor ( or ) button and specify the time by using the direct number buttons. Time 2 Hold down the or for 2 seconds or more. Slow Backward 1 01/ 08 001 / 010 --:--:-- ! To specify 1 hour 23 minutes and 40 seconds, enter "012340".
XL-DV60 Useful operation The subtitle language and the audio language you select during playback are reset each time you set this unit to the stand-by mode or change the disc. To keep your preferred languages, set them in the initial setting screen (see page 42). " To change the audio language (audio output) During playback, you can change the audio language (audio output). 1 DVD Operation 2 While a disc is playing, press the SHIFT button, and then press the ZOOM/AUDIO button.
XL-DV60 You can change the subtitle language or hide subtitles during playback. 1 2 While the disc is playing, press the SUB TITLE/SURROUND button. Within 3 seconds, press the SUB TITLE/SURROUND button repeatedly to select the desired subtitle language. Subtitle 01/09: English " To select a title, subtitle or audio language, etc. from the top menu or menu of the disc You can select a title, subtitle or audio language on your DVD if it has a disc menu.
XL-DV60 Useful operation (continued) " To zoom in on an image (zoom) You can magnify images during playback. 1 While a disc is playing, press the ZOOM/AUDIO button. Zoom x 1.5 Each press of the ZOOM button cycles through the zoom settings as follows: Zoom x 1.5 DVD Operation 2 Zoom x 2 Zoom x 3 Zoom off To shift the view and display the desired part of a zoomed image, press the cursor ( , , or ) button repeatedly. To return to normal view: Press the ZOOM button.
XL-DV60 1 2 " To improve the image quality 1 During playback, press the SHIFT button, and then press the DIGITAL GAMMA button. Level Setting Normal image Slightly brighter Level ON ON To restore the original brightness: In step 2, select "OFF". OFF G ON 2 Within 10 seconds, press the cursor ( or ) button to set the level. OFF ON G Setting Brighter A lot brighter During playback, press the SHIFT button, and then press the DIGITAL PICTURE button.
XL-DV60 Useful operation (continued) " To change the display on TV screen You can display or hide the operation indicators on the TV screen. While the disc is playing, press the SHIFT button, and then press the MENU/OSD button. (The display is changed at each operation of these two buttons.
XL-DV60 " To play repeatedly (repeat play) You can play a chapter (track) or a title repeatedly by specifying it during playback. While the disc is playing, press the REPEAT button. TV screen Each time the button is pressed, the repeat play mode changes in the following order. For DVD, the mode changes as follows: Chapter Repeat on , CHAP Repeat off , TITLE Disappear Repeats the chapter currently playing. Repeats the title currently playing. The normal playback.
XL-DV60 Useful operation (continued) " To play the contents between the specified points repeatedly (A-B repeat) You can play the desired portion repeatedly by specifying it during playback. 1 While the disc is playing, press the A-B button. TV screen On the unit A-B Set A DVD Operation This registers the start point (A). 34 2 Press the A-B button again. A-B Repeat on A-B repeat starts from the start point (A) to the end point (B). 3 Press the A-B button to return to the normal playback.
Playing a video CD " To play a video CD with P. B. C. (playback control) 1 2 Load a video CD with P.B.C. The menu will appear on the TV and playback will be paused. Example 1 2 3 Select the desired menu number by using the direct number buttons (1 - +10). Example: To select track 14, press "+10" and "4". ! Playback starts. ! After playback stops, the menu will reappear, then select the menu number you want to play. To scroll the menu screen (menu screen with more than 1 page): Press the or button.
XL-DV60 Playing an audio CD Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24 To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25 Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25 To change the audio language (audio output) . . . . . . . . . . . . . 28 To change the display on TV screen . . . . . . . . . . . . . . . . . . . . 32 To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . .
XL-DV60 " To play in the desired order (programmed playback) 6 You can play back the desired tracks in the sequence you want. Maximum of 40 tracks can be programmed. Press the cursor ( or ) button to select "Add" and press the ENTER button. PROGRAM LIST No. DISC No. INDEX Add Insert Modify Delete Clear All Exit 3 Press the cursor ( or ) button to select a disc number and press the ENTER button. DISC No.
XL-DV60 Playing an MP3 and JPEG disc Playing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24 To locate the beginning of a chapter/track (skip) . . . . . . . . . . 25 Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . 25 To change the audio language (audio output) . . . . . . . . . . . . . 28 To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . 33 To play in random order (random play) . . . . . . . . . . . . . . . .
XL-DV60 " Zoom function 2 While playback, press ZOOM/AUDIO button. Hold down the or for 2 seconds or more. Use the Zoom 025 Pct 3 or After pressing the STILL/PAUSE button, press the cursor ( , , or ) button. The image rotates as shown below. the Zoom on button : 90º rotation in a clockwise direction.
XL-DV60 Listening to the radio " Tuning 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( station. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). or ) button to tune in to the desired Radio Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.
XL-DV60 " Memorizing a station " To recall a memorized station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( or lect the desired station. Perform steps 1 - 3 in "Tuning" on page 40. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. 4 Within 30 seconds, press the MEMORY/SET button to store that station in memory.
XL-DV60 Changing the initial setting of DVD 1 2 After pressing the button, press the SET UP button. Press the cursor ( or ) button to select the main menu and press the ENTER button. Language Setup Audio Setup Video Setup Display Setup System Setup Advanced Features 3 Press the cursor ( or ) button to select the submenu and press the ENTER button. To return to the previous display, press the cursor ( ) button, or press the SHIFT button and then the RETURN button.
XL-DV60 Language Setup Audio Setup Selectable parameters (* indicates initial settings.) Description Reference page OSD Language English* Français Español Selects the initial or playback setting language. P. 46 Audio English* French Select a language to play. P. 46 Subtitle English* French Selects the subtitle displayed on the TV screen. P. 46 Disc menu English* French Selects the disc menu language. P.
XL-DV60 Changing the initial setting of DVD (continued) Setting Advanced Features Video Setup 44 Selectable parameters (* indicates initial settings.) Description Reference page P. 46 TV screen 4:3 PS* 4:3 LB 16:9 The screen mode should be set according to the connected TV type. TV type NTSC* Auto Selects the correct color system (TV standard). Interlace* Progressive The video output mode should be set according to the connected TV type. Video output NTSC: Select this mode for the NTSC TV.
XL-DV60 Setting Display Setup Selectable parameters (* indicates initial settings.) Description Angle mark On* Off Select whether to display " " (On) or not (Off). Screensaver On Off* Select whether to use a screen saver (On) or not (Off). On: Reference page P. 29 Press the button. After 5 minutes or more of inactivity, a screen saver appears. Off: Closed caption On Off* Cancel the screen saver setting. Select whether to display the closed caption (On) or not (Off).
XL-DV60 Changing the initial setting of DVD (continued) " Language " Video format Indicator Setting Indicator OSD Lan- A language for screen display can be set, such as for guage initial settings or messages. English French Close Advanced Features Audio Fermer English When playing a wide image (16:9) disc, the left and right sides of the image are cut (pan scan) to display a natural-looking 4:3 size image. A wide image disc without pan scan is played back in 4:3 letterbox.
XL-DV60 " To change the password 1 After pressing the 1G Only DVD software intended for children can be played back. 2 Press the cursor ( or ) button to select "System Setup" and press the ENTER button. 2 3 PG 4 PG 13 5 6 PG-R 7 NC-17 Only DVD software intended for general use and children can be played back. 3 Press the cursor ( or ) button to select "Password" and press the ENTER button. 4 Enter a 4-digit old password with the direct number buttons on the remote control.
XL-DV60 Timer and sleep operation Timer playback: The unit turns on and plays the desired source (DVD, video CD, audio CD, MP3 disc, tuner) at the preset time. Advanced Features Sleep operation: You can set the system to the power stand-by mode at the specified time. 48 " Timer playback Before setting timer: 1 Press the CLOCK button to check that the clock is set to the correct time. (Refer to page 21.) 2 Load the discs to be played. 1 2 Press the ON/STAND-BY button to turn the power on.
XL-DV60 Within 30 seconds, press the PRESET ( or ) button to specify the minute to start, then press the MEMORY/SET button. ! Settings are displayed in order and the unit will enter the timer stand-by mode. ! Timer set indicator will light up. To cancel the timer playback: Press the ON/STAND-BY button to turn the power on. 7 When the preset time is reached, playback will start. To reset or change the timer setting: Perform "Timer playback" from the beginning.
XL-DV60 Timer and sleep operation (continued) " Sleep operation Advanced Features 1 2 " To use timer and sleep operation together Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed and then within 8 seconds, press the MEMORY/ SET button. or (cancel) 3 4 0:05 1:30 0:10 Timer playback setting Sleep operation will automatically stop. 0:30 Within 30 seconds, press the MEMORY/SET button.
Enhancing your system XL-DV60 VCR, DVD, etc. White Red To the line output jacks White Red Audio cable (commercially available) Dolby Digital/DTS amplifier or Digital audio recorder etc. Optical digital cable (commercially available) To the optical line input jack " Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection cord to connect the VCR, DVD, etc. to the VIDEO/AUX IN jacks.
XL-DV60 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. References " General Symptom Possible cause The clock is not set to the correct time. When a button is pressed, the unit does not respond. ! Did a power failure occur? Reset the clock. (Refer to page 21.) No sound is heard. Noise is heard during playback.
XL-DV60 Symptom The radio makes unusual noises continuously. " Clearing all the memory (reset) Possible cause ! Is the unit placed near the TV or computer? ! Is the FM antenna or AM loop antenna placed properly? Move the antenna away from the AC power cord if it's located nearby. " Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (laser pickup, etc.) or on the transmitter on the remote control.
XL-DV60 Maintenance Specifications " Cleaning the laser pickup lens As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
XL-DV60 Type Signal readout Supported disc types Video signal Audio signal " Front speaker 5-disc multi-play compact disc player NTSC color DVD (region number 1, ALL), video CD, audio CD, CD-R, CD-RW Horizontal resolution: 500 lines S/N ratio: 75 dB Frequency Linear PCM DVD: 30 Hz to characteris- 20 kHz (sampling rate: 48 tics kHz) Type Maximum input power Rated input power Impedance Dimensions 30 Hz to 20 kHz (sampling rate: 96 kHz) S/N ratio Dynamic range CD: 30 Hz to 20 kHz CD: 95 dB (1 kHz) Linear
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
