Specifications

10/7/26 XL-E100H_OM_EN.fm
E-4
10
9
8
7
6
5
4
3
1
2
System connections
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM terminal. Position
the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
z The first time the unit is plugged in, the unit will enter
the demonstration mode.
z To cancel the demonstration mode, press the DEMO/
DIMMER button (remote control) during power stand-
by mode. The unit will enter the low power consumption
mode.
z To return to the demonstration mode, press the DEMO/
DIMMER button again.
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Make sure to unplug the AC power lead before making any connections.
Right
speaker
FM
aerial
screws (not supplied)
wall
< Attaching
to the wall >
< Assembling >
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Installing the AM loop aerial
Red
Black
Left
speaker
AM loop
aerial
 Aerial connection
 Speaker connection
z Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
z Use speakers with an impedance
of 4 ohms or more, as lower
impedance speakers can damage
the unit.
z Do not mistake the right and the
left channels. The right speaker is
the one on the right side when you
face the unit.
Incorrect
z Do not let the bare speaker wires touch each other.
z Do not allow any objects to fall into or to be placed in
the bass reflex ducts.
z Do not stand or sit on the speakers. You may be
injured.
 Demonstration mode
 AC power connection
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals