Specifications

E-8

ENGLISH

XL-E2H

Preparation for Use

Remote control

 Battery installation

Precautions for battery use:

z Replace all old batteries with new ones at the same time.

z Do not mix old and new batteries.

z Remove the batteries if the unit will not be used for long periods

of time. This will prevent potential damage due to battery leakage.

Caution:

z Do not use rechargeable batteries (nickel-cadmium battery, etc.).

z Installing the batteries incorrectly may cause the unit to

malfunction.

z Batteries (battery packed or batteries installed) shall not be

exposed to excessive heat such as sunshine, fire or the like.

Battery removal:

Open the battery cover and pull up the battery to take out.

Notes concerning use:

z Replace the batteries if the operating distance is reduced or if the

operation becomes erratic. Purchase 2 "AAA" size batteries (UM-

4, R03, HP-16 or similar).

z Periodically clean the transmitter on the remote control and the

sensor on the unit with a soft cloth.

z Exposing the sensor on the unit to strong light may interfere with

operation. Change the lighting or the direction of the unit if this

occurs.

z Keep the remote control away from moisture, heat, shock, and

vibrations.

 Test of the remote control

After installing the unit (see pages 6 - 7), check that the remote

control operates correctly.

Point the remote control directly at the remote sensor on the unit.

The remote control can be used within the range shown below:

Press the ON/STAND-BY button. Does the power turn on? Now, you

can use the unit.

1 Open the battery cover.

2 Insert the batteries according to the direction indicated in

the battery compartment.

When inserting or removing the batteries, push them towards the

battery terminals.

3 Close the cover.