HI FI-KOMPONENTEN-SYSTEM SYSTÈME HI FI SISTEMA HI FI COMPONENTE HI FI KOMPONENT SYSTEM HI FI SISTEMI HI FI SYSTEEM SISTEMA DE COMPONENTE Hi Fi HI FI-KOMPONENTTIJÄRJESTELMÄ ZESTAW HI-FI HI FI COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL MODELLO MODEL MODELO MALLI MODEL MODEL XL-HF201PH(S) XL-HF201PH(BK) GEBRUIKSAANWIJZING MANUAL DE OPERAÇÃO KÄYTTÖOHJE INSTRUKCJA OBSŁUGI OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI CD/USB RDS iPhone, iPod, iPo
BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS ERITYISHUOMAUTUS WAŻNE INFORMACJE SPECIAL NOTES ● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY, all’interno dell’apparecchio c’è ancora la corrente. Se il tasto ON/STAND-BY si trova nella posizione STAND-BY, l’unità può essere accesa con il modo timer o con il telecomando. Avvertenza: L’apparecchio non contiene parti riparabili dall’utente.
● Materiał audiowizualny może zawierać utwory chronione prawem autorskim, które nie mogą być nagrywane bez zgody właściciela praw autorskich. Patrz odpowiednie regulacje prawne w danym kraju ● Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to relevant law in your country. ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet.
● VORSICHT ● Advarsel: Til at forbygge ild og stød risiko, lad vaere med at undsaette denne indretning for drypning eller overstaenkning. Der må ikke anbringes nogen genstande fyldt med vand, som for eksempel vaser, på dette apparat. Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen.
● OSTRZEŻENIE Eigenschaften der Laserdiode Material: AIGaAs Wellenlänge: 790 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0.7 mW Wykorzystanie elementów sterujących oraz wykonywanie czynności innych niż opisano w niniejszej instrukcji może spowodować narażenie na działanie niebezpiecznego promieniowania. Ponieważ wiązka lasera zastosowanego w tym odtwarzaczu płyt CD jest niebezpieczna dla oczu, nie wolno samodzielnie demontować obudowy urządzenia.
“Made for iPod”, “Made for iPhone” y “Made for iPad” significa que se ha diseñado un accesorio electrónico para conectar específicamente al iPod, iPhone o iPad, respectivamente, y el fabricante ha certificado que cumple con las normas de desempeño de Apple. Apple no se responsabiliza por el funcionamiento de este dispositivo ni por su cumplimiento con las normas de seguridad y regulatorias.
Entsorgungsinformationen Oznaczenia “Made for iPod,” “Made for iPhone,” oraz “Made for iPad” oznaczają, że dane wyposażenie zostało zaprojektowane specjalnie do współpracy z urządzeniem iPod, iPhone lub iPad i posiadają certyfikat producenta na zgodność z normami firmy Apple. Firma Apple nie ponosi odpowiedzialności za działanie tego wyposażenia ani jego zgodności z normami dotyczącymi bezpieczeństwa i innymi przepisami.
Información sobre la eliminación Informazioni per un corretto smaltimento A. Información sobre eliminación para usuarios particulares 1. En la Unión Europea A. Informazioni sullo smaltimento per gli utenti (privati) 1.
Informação sobre Eliminação de Produtos Informações sobre a Eliminação de Produtos para os Utilizadores (particulares) 1. Na União Europeia Atenção: Se quiser eliminar este equipamento, não o deve fazer juntamente com o lixo doméstico comum! O equipamento eléctrico e electrónico deve ser tratado separadamente e ao abrigo da legislação aplicável que obriga a um tratamento, recuperação e reciclagem adequados de equipamentos eléctricos e electrónicos usados.
Informacje dotyczące usuwania zużytego urządzenia Information on Proper Disposal Informacje dla użytkowników (prywatne gospodarstwa domowe) dotyczące usuwania odpadów 1. W krajach Unii Europejskiej Uwaga: Jeśli chcą Państwo usunąć to urządzenie, prosimy nie używać zwykych pojemników na śmieci! Zużyty sprzęt elektryczny i elektroniczny należy usuwać oddzielnie, zgodnie z wymogami prawa dotyczącymi odpowiedniego przetwarzania, odzysku i recyklingu zużytego sprzętu elektrycznego i elektronicznego.
Informatie over afvalverwerking van batterijen De batterij die bij dit toestel geleverd wordt bevat sporen van Lood. Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat de gebruikte batterijen niet mogen terechtkomen in het gewone huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem voor deze gebruikte batterijen om eigen behandeling en recyclage volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te contacteren voor de details van ophaling en recyclage.
ENGLISH ● XL-HF201PH(S) Hi Fi Component System consisting of XL-HF201PH(S) (main unit) and CP-HF200H (speaker system). ● XL-HF201PH(BK) Hi Fi Component System consisting of XL-HF201PH(BK) (main unit) and CP-HF200H (speaker system). Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.
Precautions ■ General ● Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") 10 cm (4") ● Use the unit on a firm, level surface free from vibration. ● Place the speakers at least 30 cm (12") away from any CRT TV to avoid colour variations across the TV screen. If the variations persist, move the speakers further away from the TV.
Controls and indicators (continued) ■ 1 2 21 22 23 24 25 4 5 6 7 8 26 27 28 9 10 11 12 13 14 15 29 30 31 32 33 34 35 36 CD/USB RDS 16 9 1 23 4 5 17 18 19 20 21 ■ 1. 2. 3. 4. Page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5 2. On/Stand-by Button . . . . . . . . . . . . . . . . . 6, 8, 9, 18 3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 10 4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . 6 5. X-Bass Button . . . . . . . . . . . .
System connections Make sure to unplug the AC power lead before making any connections. Right speaker FM aerial Video cable (not supplied) TV To video input socket Left speaker Red Black Wall socket (AC 220 - 240 V ~ 50/60 Hz) ■ ■ Aerial connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
System connections (continued) Remote control ■ ■ Subwoofer pre-out connection You can connect a subwoofer with an amplifier to the SUBWOOFER PRE OUT socket. Audio cable (commercially available) Commercially available subwoofer (amplifier built in) Battery installation 1 Open the battery cover. 2 Insert the supplied battery according to the terminal indicated in the battery compartment. When inserting or removing the battery, push it towards the (–) battery terminals. 3 Close the cover.
General control ■ Bass control 1 Press the BASS/TREBLE button to select “Bass”. 2 Within 5 seconds, press the VOLUME (+ or –) button to adjust the bass. - 5 ↔ - 4........↔ + 4 ↔ + 5 ■ Treble control 1 Press the BASS/TREBLE button to select “Treble”. 2 Within 5 seconds, press the VOLUME (+ or –) button to CD/USB RDS adjust the treble. ■ To turn the power on - 5 ↔ - 4........↔ + 4 ↔ + 5 Press the ON/STAND-BY button to turn the power on.
Setting the clock (Remote control only) (continued) ■ 5 To adjust the hour, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 To adjust the minutes, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 minute. Hold it down to advance the time by 5 minutes interval. To confirm the time display: Press the CLOCK/TIMER button.
Listening to the iPod, iPhone or iPad (continued) ■ ■ iPod and iPhone connection (Dock only) Note: Docking station is not recommended for iPad connection. Adaptor for iPod and iPhone connection Notes: ● Please use the adaptor supplied with your iPod or iPhone unit. ● You can use an audio cable to connect your iPod to the AUDIO IN socket if: 1. your iPod adaptor does not fit into the iPod dock on the main unit. 2. you have an iPod that does not have an iPod adaptor. 3.
Listening to the iPod, iPhone or iPad (continued) ■ Function Main unit Dock/USB Navigating the iPod, iPhone or iPad menus Remote control Dock iPod iPad unit. Press it again to go back to previous menu. or ) button to select an item on the menu and then press ENTER button. Note: When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit.
Listening to a CD or MP3/WMA disc (continued) Advanced CD or MP3/WMA disc playback 5 Press the OPEN/CLOSE button to close the disc tray. 6 Press the / (CD/USB / ) button to start playback. After CD/USB RDS the last track is played, the unit will stop automatically. Caution: ● Do not place two discs in one disc tray. ● Do not play discs of special shapes (heart, octagon, etc). It may cause malfunctions. ● Do not push the disc tray whilst it is moving.
Advanced CD or MP3/WMA disc playback (continued) ■ ■ Random play The tracks on the disc can be played in random order automatically. 1 Whilst in the stop mode, press the MEMORY button to enter the programming save mode. To random play all tracks: Press RANDOM button on the remote control until “Random” appears. Press the / (CD/USB / ) button. To cancel random play: Press the RANDOM button again. “RDM” indicator will disappear.
MP3/WMA folder mode (only for MP3/WMA files) To play back MP3/WMA (Windows Media Audio) file There are many music sites on the internet that you can download MP3/WMA (Windows Media Audio) music files. Follow the instructions from the website on how to download the music files. You can then play back these downloaded music files by burning them to a CD-R/RW disc. ● Your downloaded song/files are for personal use only. Any other usage of the song without owner’s permission, is against the law.
Listening to USB mass storage device/MP3 player 2 Press the FOLDER button, and press the PRESET ( or ) button to select desired playback folder. To start playback with folder mode on, go to step 4. To change the playback folder, press the PRESET ( or ) button to select another folder. 3 Select desired file to be played back by pressing the or button. 4 Press the / (CD/USB / ) button. Playback will start and the file name will be displayed.
Advanced USB playback Listening to the radio The following functions are the same as CD operations: Page Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .11 Note: If USB memory device is not connected, “USB No Media” will be shown on the display.
Listening to the radio (continued) Using the Radio Data System (RDS) ■ RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc. When tuned to an RDS station, “RDS” and the station name will be displayed.
Using the Radio Data System (RDS) (continued) ■ Using the Auto Station Programme Memory (ASPM) Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store will be less. Notes for radio text: ● The first 14 characters of the radio text will appear for 4 seconds and then they will scroll across the display.
Using the Radio Data System (RDS) (continued) Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement) You can search for and receive the following PTY, TP and TA signals. NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M EASY M LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL Short accounts of facts, events and publicly expressed views, reportage and actuality.
Timer and sleep operation (Remote control only) ■ Timer playback Before setting timer: ● Check that the clock is set to the correct time (refer to page 6). If it is not set, you cannot use the timer function. ● For timer playback: Plug in USB or load discs or dock iPod to be played. CD/USB RDS 1 Press the ON/STAND-BY button to turn the power on. 2 Press and hold the CLOCK/TIMER button.
Timer and sleep operation (Remote control only) (continued) 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer operates at the same time every selected day. It will continue until the daily timer setting is cancelled. Cancel the daily timer when it is not in use. ■ Sleep operation The radio, compact disc, iPod, USB, Audio In and Line In can all be turned off automatically.
Enhancing your system Troubleshooting chart The connection lead is not included. Purchase a commercially available lead as shown below. Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. ■ General Symptom Portable audio player, etc. ● Did a power failure occur? Reset the clock.
Troubleshooting chart (continued) ■ If such a problem occurs, do the following: USB 1 Set the unit to the stand-by mode and turn the power on Symptom ● Device cannot be detected. ● ● ● ● ● Playback does not start. ● ● ● Wrong time display. ● ● Wrong file name display. ● ■ 2 If the unit is not restored in the previous operation, unplug and plug in the unit again, and then turn the power on. Note: If neither operation above restores the unit, clear all the memory by resetting it.
Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ■ General Power source AC 220 - 240 V ~ 50/60 Hz Power consumption Power on: 40 W Power stand-by: 0.
TINSZA992AWZZ XL-HF201PH_Back.
