MIKRO KOMPONENTEN SYSTEM MICRO-CHAÎNE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Mikro Komponenten System XL-HP434H besteht aus XL-HP434H (Hauptgerät) und CP-HP434H (Lautsprechersystem). Micro-chaîne XL-HP434H composée de XL-HP434H (appareil principal) et CPHP434H (enceinte acoustique). Sistema micro XL-HP434H que consta de XL-HP434H (aparato principal) y CPHP434H (sistema de altavoces).
XL-HP434H BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES ● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillaeg nr. 93/68/EEC. ● Dette produktet oppfyller betingelsene i direktivene 89/336/ EEC og 73/23/EEC i endringen 93/68/EEC. ● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
1 ● Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, todavía hay tensión dentro del aparato. Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, el aparato puede ponerse en funcionamiento utilizando el modo del temporizador o el controlador remoto. Advertencia: Tenga en cuenta que dentro de este aparato no hay piezas que pueda reparar. No quite nunca las tapas a menos que se esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
XL-HP434H ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet. Når ON/STAND-BY-knappen er sat i STAND-BY position, kan apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen. Advarsel: Apparatet indeholder ingen dele, der kan repareres af brugeren selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil. Apparatet indeholder farlig strømspaending.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
XL-HP434H ● VORSICHT Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen. Da der in diesem Compact Disc Player verwendete Laserstrahl für die Augen schädlich ist, ist das Gehäuse unter keinen Umständen zu zerlegen. Wenden Sie sich für Wartungsarbeiten nur an berechtigten Fachhändler. ● ATTENTION Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement.
Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW XL-HP434H Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
ENGLISH XL-HP434H ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 ! Preparation for Use Accessories System connections . . . . . .
Precautions XL-HP434H ! General " Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") ENGLISH " Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires. " Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
XL-HP434H Controls and indicators ENGLISH ! Front panel 10 11 General Information 1 12 13 14 15 16 17 18 19 20 2 3 4 5 6 7 8 9 21 22 23 24 25 26 27 28 29 30 Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4. Clock/Timer Button . . . . . . . . . . . . . . . .
XL-HP434H 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 21 17 23 18 19 22 Reference page 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. MP3 Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 3. MP3 Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 5. Traffic Announcement Indicator . . . . . . . . . . . . . .
XL-HP434H Controls and indicators (continued) ENGLISH ! Rear panel 4 Reference page 1. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . .
XL-HP434H 7 8 9 10 11 3 13 18 14 19 15 20 16 21 17 22 23 24 25 4 5 6 26 27 28 29 12 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 10 2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 14 3. Cursor Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4. Character Input/Disc Direct Search Buttons . . . . . . . . 16, 21 5. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . .
XL-HP434H System connections ENGLISH Make sure to unplug the AC power lead before any connections. Aerial connection (see page 8) FM aerial AM loop aerial Right speaker Preparation for Use Left speaker 20 AC power connection (see page 9) E-7 03/12/2 Downloaded From Disc-Player.com Sharp Manuals XL-HP434H(H)E1.
XL-HP434H 21 ENGLISH ! Aerial connection ! Speaker connection Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Note: Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.
XL-HP434H ENGLISH System connections (continued) ! AC power connection ! Demonstration mode After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
Remote control ! Battery installation 1 2 3 Remove the battery cover. Insert the supplied batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. XL-HP434H Notes concerning use: " Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar).
XL-HP434H General control ENGLISH ! Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. 0 ..... 30 MAXIMUM ! Bass control (X-BASS) Basic Operation When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear.
Setting the clock XL-HP434H ENGLISH 5 Press the or button to adjust the hour and then press the MEMORY/SET button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. In this example, the clock is set for the 24-hour (0:00) display. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the or button to select 24-hour or 12hour display and then press the MEMORY/SET button. Press the CLOCK/TIMER button.
XL-HP434H ENGLISH Listening to a CD or MP3 disc This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. CD or MP3 disc Playback MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality.
XL-HP434H Press the ON/STAND-BY button to turn the power on. 4 Place the disc on the disc tray 1, label side up. Be sure to place 8 cm (3") disc in the middle of the disc trays. Press the CD button. Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 12 cm (5") 8 cm (3") " Playback will begin from track 1 on the DISC 1. After that disc finishes playing, the next disc will automatically play.
XL-HP434H ENGLISH Listening to a CD or MP3 disc (continued) ! Various disc functions Function Main unit CD or MP3 disc Playback Play Remote control Operation Press in the stop mode. Stop Press in the playback mode. Pause Press in the playback mode. Press the / button to resume playback from the paused point. Press in the playback or stop mode. If you press the button in the stop mode, press the / button to start the desired track. Press and hold down in the playback mode.
Advanced CD or MP3 disc playback XL-HP434H ENGLISH ! To specify a disc to play ! Direct track search You can play a disc by specifying the disc number. By using the direct search buttons, the desired tracks on the current disc can be played. 1 Press one of the 1- 5 buttons to select the desired disc. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc. 2 Within 5 seconds, press the CD DIRECT PLAY button on the main unit.
XL-HP434H ENGLISH Advanced CD or MP3 disc playback (continued) ! Repeat play ! Random play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. The tracks on the disc(s) can be played in random order automatically. CD or MP3 disc Playback To repeat all tracks on up to 5 discs: Press the / button twice. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control.
XL-HP434H ENGLISH ! Programmed play 1 Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. 2 Press one of the 1 - 5 buttons to select the desired disc. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR/DIMMER button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared.
XL-HP434H CD or MP3 disc Playback ENGLISH MP3 navigation (only for MP3 files) MP3 navigation: You can search and play files by folder or title. For example, when you assign three titles to a file, enter genre (such as jazz) as title 1, album name as title 2, and music title as title 3 to search the file by any title. " You can search and play files by folder or title 1/2/3 within one MP3 disc (see page 20).
XL-HP434H ENGLISH ! File search (by folder or title 1/2/3) You can search and play files by folder or title 1/2/3 within one MP3 disc. 1 Press one of the 1 taining an MP3 disc. 2 3 Press the 7 Use the or button to scroll and select a folder (or title), and then press the ENTER button. 5 buttons to select a disc tray con- Folder name button, and the unit starts to read the MP3 disc. If you press the button instead of the ENTER button, all files in the selected folder (or title) are played.
XL-HP434H ENGLISH MP3 navigation (only for MP3 files) (continued) ! Character search (for folder or title 1/2/3) CD or MP3 disc Playback By entering a name, you can search files by folder or title 1/2/3 within one MP3 disc. 1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)" on page 20. 2 3 Press the MP3 NAVIGATION button. Press the , , or button to select "FOL", "T-1", "T-2" or "T-3". To search files by folder name, select "FOL" (will flash).
XL-HP434H Folders or titles can be programmed within one MP3 disc. Folder, title 1, title 2 and title 3 cannot be programmed together simultaneously. 1 Perform steps 1 - 3 in "File search (by folder or title 1/2/3)" on page 20. 2 3 Press the MP3 NAVIGATION button. 4 Press the , , or button to select "FOL", "T-1", "T-2" or "T-3" and then press the ENTER button. The total number of folders (or titles) appears for 2 seconds, and names of the first 2 folders (or titles) are displayed.
XL-HP434H Listening to the radio 21 ENGLISH 3 Press the TUNING ( station. or ) button to tune in to the desired Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Radio Notes: " When radio interference occurs, auto scan tuning may stop automatically at that point.
XL-HP434H ! Memorising a station ! To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( or lect the desired station. 1 2 Perform steps 1 - 3 in "Tuning" on page 23. 3 Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1.
XL-HP434H Listening to a cassette tape ENGLISH Tape Playback Before playback: " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. " Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. ! Tape playback 1 2 3 Press the ON/STAND-BY button to turn the power on.
Recording on a cassette tape ENGLISH ! Various tape functions Function Main unit Remote control XL-HP434H Operation Side A playback Press in the stop mode. Side B playback Press in the stop mode. Before recording: " When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. " SHARP is not liable for damage or loss of your recording arising from malfunction of this unit.
XL-HP434H Recording on a cassette tape (continued) ENGLISH ! Recording from a CD or MP3 disc Tape Recording You can record the desired disc using the CD DIRECT PLAY button. 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the Press the CD button. Load a cassette into the cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. button to choose one side or both sides. ... To record on both sides. ...
XL-HP434H To perform programmed recording: 1 Programme discs and tracks (see pages 18, 22). 2 Press the button. 3 Press the / ( ) button to record on side A, or the for side B. ( ) button To stop recording: Press the (TAPE ) button. The disc and tape will stop. Note: To record on both sides, begin with side A. (If recording is started from side B, the tape will not switch over to side A.
XL-HP434H Advanced Features ENGLISH Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sport, music, etc. When tuned to an RDS station, "RDS" and the station name will be displayed.
XL-HP434H ! Using the Auto Station Programme Memory (ASPM) ENGLISH Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. Up to 40 stations can be stored. If you have already stored some stations in memory, the number of new stations you can store will be less. Press the TUNER (BAND) button to select the FM band. Press and hold down the ASPM button for at least 3 seconds. 1 After "ASPM" has flashed for about 4 seconds, scanning will start (87.50 - 108.00 MHz).
XL-HP434H Using the Radio Data System (RDS) (continued) ENGLISH Advanced Features To stop the ASPM operation before it is complete: Press the ASPM button whilst it is scanning for stations. The stations which are already stored in memory will be kept there. Notes: ! If the same station is broadcasting on different frequencies, the strongest frequency will be stored in memory. ! Any station which has the same frequency as one stored in memory will not be stored.
XL-HP434H ENGLISH " To recall stations in memory To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc. ... see pages 33 - 34) from the stations in memory. Press the TUNER (BAND) button to select the FM. Press the PTY.TI SEARCH button. "SELECT" and "PTY TI" will appear alternately for about 6 seconds. 3 Within 6 seconds, press the PRESET ( lect the programme type.
XL-HP434H Using the Radio Data System (RDS) (continued) ENGLISH Advanced Features Notes: ! If the display has stopped flashing, start again from step 2. If the unit finds a desired programme type, the corresponding channel number will flash for about 4 seconds, and then the station name will flash for 7 seconds, which will remain lit. ! If you want to listen to the same programme type of another station, press the PTY.TI SEARCH button whilst the channel number or station name is flashing.
XL-HP434H ENGLISH CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL RELIGION PHONE IN TRAVEL LEISURE JAZZ Classical music for general, rather than specialist appreciation. Examples of music in this category are instrumental music, and vocal or choral works. Performances of major orchestral works, symphonies, chamber music, etc., and including Grand Opera. Musical styles not fitting into any of the other categories.
XL-HP434H ENGLISH Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, MP3 disc, tuner, tape) at a preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. This unit has 2 types of timer: ONCE TIMER and DAILY TIMER. Advanced Features Once timer: Once timer play or once timer recording works for one time only at a preset time. For example, if you are away but want to record a programme on a radio station.
XL-HP434H ENGLISH Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the MEMORY/ SET button. 5 Press the or button to select "PLAY" or "REC", and press the MEMORY/SET button. White Red The illustrations show the daily timer setting. 6 Press the or button to adjust the hour and then press the MEMORY/SET button. 9 Switch input with the or button, and then press the MEMORY/SET button. To select the timer playback source: CD, TUNER or TAPE.
XL-HP434H Timer and sleep operation (continued) ENGLISH 12 When the preset time is reached, playback or recording will start. The volume will increase gradually until it reaches the preset volume. Advanced Features 13 When the timer end time is reached, the system will enter the power stand-by mode automatically. Once timer: The timer will be cancelled. Daily timer: The timer will operate at the same time every day. It will continue until the daily timer setting is cancelled.
XL-HP434H ENGLISH The radio, CD, MP3 disc and cassette tape can all be turned off automatically. 1 2 3 Play back the desired sound source. 4 Press the Press the CLOCK/TIMER button. Within 10 seconds, press the or button to select "SLEEP", and press the MEMORY/SET button. or button to select the time. (Maximum: 3 hours - Minimum: 1 minute) ! 3 hours - 5 minutes 5-minute intervals ! 5 minutes - 1 minute 1-minute intervals 5 6 Press the MEMORY/SET button. "SLEEP" will appear.
XL-HP434H ENGLISH Enhancing your system The connection lead is not included. Purchase a commercially available lead as shown below. VCR, DVD, etc. To the line output sockets Advanced Features White Red Red White RCA lead (not supplied) " Listening to the playback sounds from VCR, DVD, etc. 1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/AUX IN sockets. When using video equipment, connect the audio output to this unit and the video output to a television.
Troubleshooting chart " Subwoofer connection When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass. Connect an RCA lead from a commercially available speaker with a built-in amplifier to the SUBWOOFER PRE-OUT socket. XL-HP434H Many potential problems can be resolved by the owner without calling a service technician.
XL-HP434H ENGLISH Troubleshooting chart (continued) " Cassette deck " Tuner Symptom ! Cannot record. ! ! ! ! ! References ! Possible cause ! Is the erase-prevention tab removed? Cannot record tracks with ! Is it a normal tape? (You cannot proper sound quality. record on a metal or CrO tape.) Cannot erase completely. Sound skipping. ! Is there any slack? ! Is the tape stretched? Cannot hear treble. ! Are the capstans, pinch rollers, or heads dirty? Sound fluctuation. Cannot remove the tape.
XL-HP434H ENGLISH " If trouble occurs " Before transporting the unit When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
XL-HP434H ENGLISH Maintenance " Cleaning the tape-handling parts " Cleaning the CD pickup lens ! Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. ! When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.
Specifications " General Power source Power consumption Dimensions Weight AC 230 V, 50 Hz Power on: 100 W Power stand-by: 0.6 W (*) Width: 185 mm (7-1/4") Height: 260 mm (10-1/4") Depth: 307 mm (12") 6.0 kg (13.2 lbs.) ( * )This power consumption value is obtained when the demonstration mode is cancelled in the power stand-by mode. Refer to page 9 to cancel the demonstration mode.
SHARP CORPORATION 9906 TINSZA007AWZZ 03M R YT 1 03/11/12 Downloaded From Disc-Player.com Sharp Manuals XL-HP434H(H)_BACK.
DOWN UP XL-HP434H MICRO COMPONENT SYSTEM Downloaded From Disc-Player.
