MIKRO KOMPONENTEN SYSTEM MICRO-CHAÎNE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODÈLE MODELO MODELL Mikro Komponenten System XL-HP500H besteht aus XL-HP500H (Hauptgerät) und CP-HP500H (Lautsprecher-System). Micro-chaîne XL-HP500H composée de XL-HP500H (appareil principal) et de CP-HP500H (enceintes acoustiques). Sistema micro XL-HP500H que consta de XL-HP500H (unidad principal) y CPHP500H (sistema de altavoces).
XL-HP500H BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN NOTAS ESPECIAIS SPECIAL NOTES ● Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillaeg nr. 93/68/EEC. ● Dette produktet oppfyller betingelsene i direktivene 89/336/ EEC og 73/23/EEC i endringen 93/68/EEC. ● Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/EEC.
● Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, todavía hay tensión dentro del aparato. Cuando el botón ON/STAND-BY está puesto en la posición STAND-BY, el aparato puede ponerse en funcionamiento utilizando el modo del temporizador o el controlador remoto. Advertencia: Tenga en cuenta que dentro de este aparato no hay piezas que pueda reparar. No quite nunca las tapas a menos que se esté cualificado para hacerlo. Este aparato tiene en su interior tensiones peligrosas.
XL-HP500H ● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der stadig netspaending til stede i apparatet. Når ON/STAND-BY-knappen er sat i STAND-BY position, kan apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen. Advarsel: Apparatet indeholder ingen dele, der kan repareres af brugeren selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil. Apparatet indeholder farlig strømspaending.
● Vorsicht: Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten besteht die Gefahr eines Brandes oder elektrischen Schlages. Es sollten keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf dem Gerät abgestellt werden. ● Attention: Pour éviter un incendie ou une secousse électrique, mettre l’appareil à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un récipient contenant du liquide.
XL-HP500H ● VORSICHT Verwendung von Regelungen oder Einstellungen bzw. Durchführung von anderen Verfahren als die hierin angegebenen kann zum Aussetzen gefährlicher Strahlung führen. Da der in diesem Compact Disc Player verwendete Laserstrahl für die Augen schädlich ist, ist das Gehäuse unter keinen Umständen zu zerlegen. Wenden Sie sich für Wartungsarbeiten nur an berechtigten Fachhändler. ● ATTENTION Respecter les indications données relatives à la manipulation, au réglage et au fonctionnement.
Eigenschaften der Laserdiode Material: GaAIAs Wellenlänge: 780 nm Emissionsdauer: kontinuierlich Laser-Ausgang: max. 0,6 mW XL-HP500H Caractéristiques de la diode laser Matière: GaAIAs Longueur d’onde: 780 nm Durée d’émission: ininterrompue Puissance de sortie laser maximale: 0,6 mW Características del diodo láser Material: GaAIAs Longitud de onda: 780 nm Duración de emisión : continua Salida de láser: máx.
ENGLISH XL-HP500H ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. ! General Information Page Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Precautions XL-HP500H " Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free space along the sides, top and back of the equipment. 10 cm (4") 10 cm (4") 10 cm (4") 10 cm (4") " Use the unit on a firm, level surface free from vibration. " Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generates electrical noise.
XL-HP500H Controls and indicators ENGLISH ! Front panel 1 9 General Information 2 10 3 4 5 6 7 11 12 13 14 15 8 16 17 18 19 20 22 21 23 Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. Timer/Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 27 4. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
XL-HP500H 1 2 3 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 19 4 5 6 1 1. Disc Number Indicators 2. CD Play Indicator 3. Tape Reverse Mode Indicator 4. Tape Reverse Play Indicator 5. Tape Forward Play Indicator 6. RDS Indicator 7. Traffic Announcement Indicator 8. Traffic Programme Indicator 9. Dynamic PTY Indicator 10. FM Stereo Mode Indicator 11. FM Stereo Receiving Indicator 12. Memory Indicator 13. Extra Bass Indicator 14. Timer Recording Indicator 15. Timer Play Indicator 16. CD Pause Indicator 17.
XL-HP500H Controls and indicators (continued) ENGLISH ! Remote control 1 7 2 General Information 8 17 18 19 20 21 22 23 24 25 9 10 3 12 13 14 4 5 6 11 15 16 Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. CD Direct Play Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3. CD Track Down or Fast Reverse, Tape Fast Wind, Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . 12, 16, 17 4. Clock Button . . . .
Remote control ! Battery installation 1 2 3 Remove the battery cover. Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the batteries, push them towards the battery terminals. Replace the cover. XL-HP500H Notes concerning use: " Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2 "AA" size batteries (UM/ SUM-3, R6, HP-7 or similar).
XL-HP500H System connections ENGLISH ! Aerial connection AM loop aerial Supplied FM aerial: Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received. FM aerial Preparation for Use Right speaker Left speaker Supplied AM loop aerial: Connect the AM loop aerial to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc.
XL-HP500H ENGLISH Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) terminal. Caution: " Connect the speaker wires to the speakers first, then to the unit. " Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit. " Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit. " Do not let the bare speaker wires touch each other.
XL-HP500H Sound control ENGLISH ! Bass control Basic Operation When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button. X-BASS indicator ! Equaliser When the EQUALIZER (EQUALIZER MODE) button is pressed, the current mode setting will be displayed.
Setting the clock XL-HP500H ENGLISH 4 Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. " Press the TUNING/TIME ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. " When the 12-hour display is selected, "AM" will change automatically to "PM". 1 2 3 5 Press the TUNING/TIME ( or ) button to adjust the minutes and then press the MEMORY/SET button. Press the ON/STAND-BY button to turn the power on.
XL-HP500H ENGLISH Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot record. Some audio CD-R and CD-RW discs may not be playable due to the state of disc or the device that was used for recording. 5 Press the button to close the disc tray 1. Total number of tracks on the CD whose number is flashing Total playing time of the CD whose number is flashing 6 You can place discs on the trays 2 - 3 by following steps 3 - 5. 7 Press the / button to start playback.
XL-HP500H To move to the beginning of the next track: Press the button for less than 0.5 seconds during playback. To restart the track being played: Press the button for less than 0.5 seconds during playback. Notes: ! You can locate the beginning of a track on a single disc only. or button ! You can skip to any track by pressing the repeatedly until the desired track number appears.
XL-HP500H ENGLISH Advanced CD playback " Direct search of the track " Repeat play By using the direct search buttons, the desired tracks on the current disc can be played. All tracks on up to 3 discs, all tracks on the chosen disc or a programmed sequence can be continuously repeated. To repeat all tracks on up to 3 discs: Press the / button twice. Use the direct search buttons on the remote control to select the desired track whilst playing the selected disc.
XL-HP500H ENGLISH " Programmed play You can choose up to 32 selections for playback in the order you like. 2 3 Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. Press one of the DISC SELECT ( 1 - 3) buttons to select the desired disc. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button on the remote control.
XL-HP500H Listening to the radio ENGLISH 3 Press the TUNING/TIME ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING/TIME button as many times as required to tune in to the desired station. Auto tuning: When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Radio Notes: ! When radio interference occurs, auto scan tuning may stop automatically at that point.
XL-HP500H ! Memorising a station ! To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) 1 Perform steps 1 - 3 in "Tuning" on page 15. ! To scan the preset stations Press the MEMORY/SET button to enter the preset tuning saving mode. The stations saved in memory can be scanned automatically. (Preset memory scan) 1 2 3 4 Press the PRESET ( or ) button for less than 0.5 seconds to select the desired station.
XL-HP500H ENGLISH Listening to a cassette tape Before playback: " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. " Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 4 Load a cassette into the cassette compartment with side A facing you. 5 Press the button to choose one side or both sides. ... To listen to both sides. .
Recording to a cassette tape XL-HP500H ENGLISH ! Recording from a CD (CDs) You can record the desired CD using the DISC SELECT - 3) buttons. - 1 2 3 Press the ON/STAND-BY button to turn the power on. 4 Press the ( 1 Press the CD button and load the desired disc. Load a cassette into the cassette compartment with side A facing you. Wind past the leader of the tape, on which recording cannot be performed. button to choose one side or both sides. ... To record on both sides. ...
XL-HP500H Recording to a cassette tape (continued) ENGLISH Recording from several CDs continuously: 1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 18. 2 Press the / ( ) button to record on side A, or the button for side B. To perform programmed recording: 1 Programme discs and tracks. (See page 14.) 2 Press the button. 3 Press the / ( ) button to record on side A, or the side B. button for ! Recording from the radio 1 2 Tune in to the desired station. (See page 15.
Using the Radio Data System (RDS) You can control the RDS by using the buttons on the main unit only. XL-HP500H ENGLISH ! Information provided by RDS Each time the DISPLAY MODE button is pressed, the display will switch as follows: Station name (PS) Programme type (PTY) Frequency Radio text (RT) When you are tuning in to a station other than an RDS station or to an RDS station which sends weak signal, the display will change in the following order: NO PS NO PTY FM 98.
XL-HP500H Using the Radio Data System (RDS) (continued) ENGLISH Descriptions of the PTY (Programme Type) codes, TP (Traffic Programme) and TA (Traffic Announcement). You can search for and receive the following PTY, TP and TA signals. Advanced Features NEWS Short accounts of facts, events and publicly expressed views, reportage and actuality. AFFAIRS Topical programme expanding or enlarging upon the news, generally in different presentation style or concept, including debate, or analysis.
XL-HP500H Songs which originate from, or continue the musical tradition of the American Southern States. Characterised by a straightforward melody and narrative story line. NATION Current Popular Music of the Nation or Region in that M country's language, as opposed to International 'Pop' which is usually US or UK inspired and in English. OLDIES Music from the so-called "golden age" of popular music.
XL-HP500H Using the Radio Data System (RDS) (continued) ENGLISH Advanced Features To stop the ASPM operation before it is complete: Press the ASPM button whilst it is scanning for stations. The stations which are already stored in memory will be kept there. Notes: " If the same station is broadcasting on different frequencies, the strongest frequency will be stored in memory. " Any station which has the same frequency as one stored in memory will not be stored.
XL-HP500H Press the PTY.TI SEARCH button. Notes: " If the display has stopped flashing, start again from step 2. If the unit finds a desired programme type, the corresponding channel number will flash for about 4 seconds, and then the station name will flash for 7 seconds, which will remain lit. " If you want to listen to the same programme type of another station, press the PTY.TI SEARCH button whilst the channel number or station name is flashing. The unit will look for the next station.
XL-HP500H ENGLISH Timer and sleep operation Timer playback: The unit turns on and plays the desired source (CD, tuner, tape) at the preset time. Timer recording: The unit turns on and starts recording from the tuner at the preset time. Advanced Features Sleep operation: The radio, compact disc and cassette tape can all be turned off automatically. ! Timer playback or timer recording Before setting timer: 1 Press the CLOCK button to check that the clock is on time.
XL-HP500H ENGLISH Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. The illustrations show the timer playback setting. 6 Press the TUNING/TIME ( or ) button to specify the minutes, then press the MEMORY/SET button. The unit will enter the timer stand-by mode automatically. To reset or change the timer setting: Perform "Timer playback or timer recording" from the beginning.
XL-HP500H ENGLISH Timer and sleep operation (continued) Enhancing your system " Sleep operation The connection lead is not included. Purchase a commercially available lead as shown below. 1 2 Play back the desired sound source. VCR, DVD, etc. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. Advanced Features To the line output sockets To change the sleep time: Whilst the sleep time is displayed, press the TUNING/TIME ( or ) button.
XL-HP500H " To record on a tape ENGLISH " Subwoofer connection 1 Insert a cassette in the cassette compartment. 2 Press the VIDEO/AUX button. 3 Press the 4 Press the 5 Play the VCR, DVD, etc. When a commercially available speaker with a built-in amplifier is connected to this unit, you can enjoy sound with emphasised bass. Connect an RCA lead from a commercially available speaker with a built-in amplifier to the SUBWOOFER socket. button. / ( ) or button.
XL-HP500H ENGLISH Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. " General Symptom ! The clock is not on time. ! ! When a button is pressed, ! the unit does not respond. References ! ! No sound is heard. ! ! ! Possible cause Did a power failure occur? Reset the clock. (Refer to page 10.
XL-HP500H " Remote control Symptom ! The remote control does not operate. " Clearing all the memory (reset) Possible cause ! Is the AC power lead of the unit plugged in? ! Is the battery polarity respected? ! Are the batteries dead? ! Is the distance or angle incorrect? 1 2 ENGLISH Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears.
XL-HP500H ENGLISH Maintenance Specifications " Cleaning the tape-handling parts As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. ! Dirty heads, capstans or pinch rollers can cause poor sound and tape jams.
XL-HP500H " CD player Type Signal readout D/A converter Frequency response Dynamic range 3-disc multi-play compact disc changer player Non-contact, 3-beam semiconductor laser pickup 1-bit D/A converter 20 - 20,000 Hz 90 dB (1 kHz) Type Maximum input power Rated input power Impedance Dimensions " Tuner FM: 87.
SHARP CORPORATION 9906 TINSZ0849AWZZ 02G R KS 1 XLHP500HH_BACK.pm Downloaded From Disc-Player.com Sharp Manuals 1 02.7.
