Specifications

03/8/20 XL-MP45H(H)E2.fm
E-19
ENGLISH
XL-MP45H
TINSZ0227SJZZ
Tape Recording
Recording to a cassette tape (continued)
! Recording from the radio
To stop recording:
Press the button.
To interrupt recording:
Press the button.
To resume recording, press the ( ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
! Erasing recorded tapes
1
Tune in to the desired station. (See page 15.)
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the button.
Recording will be paused.
4
Press the ( ) button to start re-
cording.
1 Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2 Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3 Press the button.
4 Press the ( ) button to start erasing.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette
tape, make sure that the erase-
prevention tabs are not re-
moved. Cassettes have remov-
able tabs that prevent
accidental recording or erasing.
"
To protect the recorded sound,
remove the tab after recording.
Cover the tab hole with adhe-
sive tape to record on the tape
without the tab.
Side A
Tab for side B Tab for side A
Downloaded from www.Manualslib.com manuals search engine
Downloaded From Disc-Player.com Sharp Manuals