XL-MP10H (A) TINSEA036SJZZ Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MICRO COMPONENT SYSTEM XL-MP10H Micro Component System consisting of XL-MP10H (main unit) and CP-S10H (speaker system). MODEL XL-MP10H OPERATION MANUAL Accessories Please confirm that the following accessories are included.
Important Instruction XL-MP10H Special notes Contents Warning: ! When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/ STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. ! This unit contains no user serviceable parts. Never remove covers unless qualified to do so.
Precautions XL-MP10H ! Please ensure that the equipment is positioned in a well ventilated area and that there is at least 10 cm of free space along the sides and back. There must also be a minimum of 20 cm of free space on the top of the unit. 10 cm 10 cm 20 cm 10 cm ! Use the unit on a firm, level surface free from vibration. ! Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.
General Information XL-MP10H Controls and indicators 1 9 2 3 4 5 6 7 10 11 12 13 14 8 15 16 17 18 19 20 21 22 23 28 29 30 24 25 26 27 31 32 Reference page 1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. Bass/Treble Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . 8 4. Function Selector Button . . . . . . . . . . . . . . . . . . . . 11, 16, 18 5.
XL-MP10H 1 1. Full-Range Speaker 2. Speaker Wire 1 2 3 4 5 6 7 17 18 8 9 19 20 21 10 11 12 13 14 15 22 23 24 25 26 27 Reference page 3. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.
XL-MP10H System connections " Aerial connection Connect the FM/AM loop aerial to the ANTENNA socket. Position the FM aerial wire and rotate the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, or attach it to a stand or a wall. Make sure to unplug the AC power lead before making any connections. AM loop aerial Preparation for Use FM aerial Right speaker Left speaker Notes: ! Placing the aerial on the unit or near the AC power lead may cause noise pickup.
XL-MP10H (A) TINSEA036SJZZ 2 XL-MP10H " AC power connection " To turn the power on After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. Press the ON/STAND-BY button to turn the power on. Note: Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. 2 After use: Press the ON/STAND-BY button to enter the power stand-by mode. " Battery installation 1 2 3 Remove the battery cover.
XL-MP10H Sound control " Adjusting the volume Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease. Remote control operation: Press the VOLUME (- or +) button to increase or decrease the volume. 0 1 2 ..... 28 29 30 Basic Operation " Adjusting the bass Main unit operation: 1 Press the BASS/TREBLE button to select "BASS". 2 Within 5 seconds, turn the VOLUME control to adjust the bass.
Setting the clock XL-MP10H 3 Within 1 minute, press the PRESET ( or ) button to adjust the hour and then press the MEMORY button. 3 Press the PRESET ( or ) button once to advance the time by 1 hour. Hold it down to advance continuously. This may be operated only with the remote control. In this example, the clock is set for the 24-hour (0:00) display. 1 2 Press the CLOCK button and within 5 seconds, press the MEMORY button.
XL-MP10H Listening to a disc Disc Playback This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the equipment used for recording. MP3: MP3 is a form of compression. It is an acronym which stands for MPEG Audio Layer 3.
XL-MP10H Press the ON/STAND-BY button to turn the power on. 3 Press the ment. 4 Place the disc on the spindle, label side up. 5 6 Press the Press the FUNCTION button until "CD DISC" appears on the display. When operating with the remote control, press the CD button. CD EJECT button to open the disc compart- Close the disc compartment by firmly pushing the corner marked "PUSH CLOSE". [MP3] MP3 track indicator ( ) button to start playback from track 1.
XL-MP10H Listening to a disc (continued) ! Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. " Do not write on either side of the disc, particularly the non-label side from which signals are read. Do not mark this surface. " Keep your discs away from direct sunlight, heat, and excessive moisture.
Advanced disc playback XL-MP10H ! To locate the beginning of a track To move to the beginning of the next track: Press the button for less than 0.5 seconds during playback. To restart the track being played: Press the button for less than 0.5 seconds during playback. Note: You can skip to any track by pressing the edly until the desired track number appears. or 4 button repeat- Sound will be heard for a CD, but not for CD-R/RW discs recorded in the MP3 or WMA format.
XL-MP10H Advanced disc playback (continued) ! Direct search of the track ! Repeat play By using the direct search buttons, the desired tracks can be played. All tracks or a programmed sequence can be continuously repeated. To repeat all tracks: 1 Press the REPEAT button. 2 Press the ( ) button. To repeat a desired track: 1 Perform steps 1 - 3 in the "Programmed play" section on page 15 and then press the REPEAT button. 2 Press the ( ) button.
XL-MP10H ! Programmed play You can choose up to 32 selections for playback in the order you like. Whilst in the stop mode, use the direct search buttons to select the desired track. Selected track number You can also select a track by pressing the or button. 2 4 Press the MEMORY (MEMORY/ SET) button to save the track number. Disc Playback 1 Notes: " Opening the disc compartment automatically cancels the programmed sequence.
Radio XL-MP10H Listening to the radio 1 2 Press the ON/STAND-BY button to turn the power on. 3 Press the TUNING ( or ) button to tune in to the desired station. Manual tuning: Press the TUNING button as many times as required to tune in to the desired station. Auto tuning: When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Press the FUNCTION button until "FM" or "AM" appears on the display.
Listening to the memorised station XL-MP10H ! Memorising a station ! To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) Press the PRESET ( or select the desired station. ) button for less than 0.5 seconds to 1 2 Perform steps 1 - 3 in "Listening to the radio" on page 16. To select a preset station with the direct number buttons: Press the corresponding number ("0" - "+10").
XL-MP10H Listening to a cassette tape Tape Playback Before playback: " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) " Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. " Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 1 2 Press the ON/STAND-BY button to turn the power on. 3 4 Press the 5 6 Close the cassette compartment.
Recording on a cassette tape Erase-prevention tab of cassette tapes: " When recording on a cassette tape, make sure that the erase-prevention tabs are not removed. Cassettes have removable tabs that prevent accidental recording or erasing. Tab for " To protect the recorded sound, reside B move the tab after recording. Cover the tab hole with adhesive tape to record on the tape without the tab. Side A Tab for side A 6 ! Recording from a disc 1 2 Press the ON/STAND-BY button to turn the power on.
XL-MP10H Recording on a cassette tape (continued) To perform programmed recording: 1 Programme tracks (see page 15). 2 Press the button. 3 Press the button, which also engages the button. 4 Press the button again to cancel the pause mode. 5 Press the ( ) button to start recording. To interrupt recording: Press the button. To resume recording, press the Tape Recording To stop recording: Press the button. The tape will stop. button.
Timer and sleep operation Timer playback: The unit turns on and plays the desired source (disc or tuner) at a preset time. ! Timer playback 1 2 Press the ON/STAND-BY button to turn the power on. 3 Adjust the volume using the VOLUME buttons. Do not turn the volume up too high. 4 Press the TIMER button and within 6 seconds, press the MEMORY button. Sleep operation: The radio or disc can be turned off automatically. Note: The timer and sleep operations are not available during tape mode.
XL-MP10H Timer and sleep operation (continued) 7 Advanced Features 8 The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer standby mode. To cancel the sleep operation: Press the ON/STAND-BY button whilst "SLEEP" is indicated. To cancel the sleep operation without setting the system to the stand-by mode, press the SLEEP button until "OFF" appears on the display.
Troubleshooting chart ! Tuner Symptom " The radio makes unusual noises continuously. ! General Symptom Possible cause " The clock is not set to the " Did a power failure occur? Reset correct time. the clock. (Refer to page 9.) " When a button is pressed, " Set the unit to the power standthe unit does not respond. by mode and then turn it back on. " No sound is heard. ! Cassette deck " If the unit still malfunctions, reset it. (Refer to page 24.) Symptom " Cannot record.
Maintenance XL-MP10H ! If trouble occurs ! Cleaning the CD pickup lens When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction. Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup, clean it gently with a dry cotton swab.
Specifications ! General Power source Power consumption Dimensions Weight AC 230 - 240 V, 50 Hz Power on: 25 W Power stand-by: 0.9 W Width: 160 mm Height: 242 mm Depth: 250 mm 2.3 kg ! Amplifier Output power Output terminals RMS: 10 W (5 W + 5 W) (10 % T.H.D.) Speakers: 4 ohms Headphones: 16 - 50 ohms (recommended: 32 ohms) ! Tuner Frequency range FM: 87.5 - 108.
MEMO 04/10/27 XL-MP10H(A)_MEMO.
FOR LOCATION ENQUIRIES WITHIN FOR LOCATION ENQUIRIES WITHIN AUSTRALIA NEW ZEALAND REGARDING YOUR LOCAL REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT VISIT OUR WEBSITE AT www.sharp.net.au www.sharp.net.
WARRANTY Consumer Electronic Products Congratulations on Your Purchase! This Sharp product is warranted against faults in materials and manufacture for a period of twelve(12) months from the date of original purchase. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre. These repairs would be carried out at no charge to the owner, subject to the conditions specified herein.
