Specifications

E-39
ENGLISH
XL-UH240H
XL-UH240H (BK)
XL-UH2440H
References
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
 General
 Amplifier
 USB
 CD player
 Tuner
Power source AC 230 V, 50 Hz
Power
consumption
Power on: 90 W
Power stand-by: 0.6 W(*)
Dimensions Width: 175 mm (6-3/4")
Height: 240 mm (9-1/2")
Depth: 315 mm (12-1/5")
Weight 5.4 kg (12 lbs.)
( * )This power consumption value is obtained when the
demonstration mode is cancelled in the power stand-by mode.
Refer to page 9 to cancel the demonstration mode.
Output power PMPO: 660 W
MPO: 330 W (165 W + 165 W) (DIN 45 324)
RMS: 160 W (80 W + 80 W) (DIN 45 324)
RMS: 128 W (64 W + 64 W) (DIN 45 500)
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Input terminals Video/Auxiliary (audio signal):
500 mV/47 k ohms
Class Mass storage class
Support File MP3/WMA (do not support DRM file)
Format support FAT 16 or FAT 32
Bitrate support MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other MP3 lD3 - tag only supports version 1.x
USB supports version 2.0
Type 5-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency
response
20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency range FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz